Cart
0
0.00 €
Citroën Jumper Camper Box – Removable Camper Furniture Kit
New Design removable, self-install camper furniture for compatible Citroën Jumper L1–L4 and H1–H3 Cargo, Panel Van, Combi and passenger configurations, with a 185–190 cm folding bed, made-to-measure dark grey mattress pack, rear kitchen, multi-height table, extra-large storage and Coolzone 35L fridge compatibility.
Removable Citroën Jumper Camper Kit for L1–L4 and H1–H3 Vans
New Design Camper Furniture with a 185–190 cm Bed, Dark Grey Mattress Pack, Rear Kitchen and Extra-Large Modular Storage
Transform your Citroën Jumper into a practical camper van with our New Design removable, self-install camper furniture system, created for travel, camping and everyday vehicle use.
The kit can be adapted to selected Citroën Jumper L1, L2, L3 and L4 body lengths, as well as H1, H2 and H3 roof heights, in compatible Cargo, Panel Van, Combi and passenger layouts.
Before manufacturing, we confirm the exact model year, body length, roof height, seat arrangement, interior lining, wheel-arch covers, rear air-conditioning equipment and available anchoring points.
Depending on the selected configuration, the Citroën Jumper camper kit can include:
✅ A folding camper bed approximately 185–190 cm long, with a sleeping width adapted to the vehicle and selected side modules.
✅ A made-to-measure modular dark grey mattress pack, included with every available furniture material.
✅ A rear pull-out kitchen drawer prepared for a compatible Campingaz-style stove.
✅ A multi-height table for dining, lounge and outdoor camping use.
✅ Extra-large storage trunks and front-access compartments for food, clothes, water, cookware, camping equipment or a portable toilet.
✅ Optional side modules covering compatible wheel-arch areas and extending the sleeping surface across the rear interior.
✅ A dedicated compartment or sliding support for the recommended Coolzone 35L compressor fridge, available separately.
✅ Compatibility with our independent camper sink and kitchen unit, available as a separate optional product.
When folded, the removable Citroën Jumper camper box and mattress pack remain neatly stored in the rear area, helping preserve the van's everyday cargo or passenger functionality.
Watch the demonstration videos on this page to see the bed system, rear kitchen, table positions, storage compartments and folded configuration in use.
When used as removable furniture, properly secured to suitable anchoring points and without permanent vehicle modifications, the system is normally treated as secured cargo rather than a fixed conversion. Requirements may vary according to the country, vehicle, inspection authority and accessories installed.
👉 View the Citroën Jumper camper furniture kit with mattress pack included:
👉 View the independent camper sink and kitchen unit compatible with our furniture kits:
https://www.kitmueblecamper.com/p/camper-sink-kitchen-unit-compatible-with-camper-furniture-kits/
Citroën Jumper Camper Box – Removable Camper Kit with Mattress Pack
Citroën Jumper Custom Camper Conversion – Simple and Versatile Layout
Citroën Jumper Camper Furniture Kit – Also Available for Boxer, Ducato and Current Movano
New Design Removable Camper Furniture for Large Cargo, Combi and Passenger Vans
Transform your Citroën Jumper into a practical and spacious camper van with our custom-made New Design removable camper furniture kit.
The demonstration video shows a personalised installation. The standard Citroën Jumper Camper Box follows the same modular concept: a self-install system that can be quickly unfolded, folded away or removed according to how you need to use your van.
We specialise in modular camper furniture for large vans, and the Citroën Jumper offers an excellent interior platform for creating a comfortable sleeping area, rear kitchen, dining space and extra-large storage without permanently converting the vehicle.
🔹 Shared-Platform Compatibility
Adapted versions of this removable camper system are available for the following closely related large vans:
Citroën Jumper
Peugeot Boxer
Fiat Ducato
Opel Movano from 2021 onwards
These models belong to the same large-van platform family and are available in different L1, L2, L3 and L4 lengths and H1, H2 and H3 roof heights.
However, interior trims, wheel-arch covers, anchoring points and seat configurations may vary. Before manufacturing, we confirm the exact model year, body length, roof height and interior layout of each vehicle.
🔹 Model-Specific Kits for Other Large Vans
We also manufacture versions of our New Design camper furniture for:
Ford Transit
Renault Master
Mercedes-Benz Sprinter
These vans do not share the same platform as the Jumper, Boxer, Ducato and current Movano. Their furniture therefore requires a separate model-specific configuration.
🔹 Citroën Jumper Model-Year Compatibility
We manufacture camper furniture for compatible Citroën Jumper layouts across its principal production periods:
1994–2002
2002–2006
2006–2014
2014 onwards, including later model updates
The final configuration is adapted to the actual vehicle rather than relying only on its production year.
In compatible layouts, the kit is designed for installation without cutting body panels or making permanent structural alterations.
When used as removable furniture, properly secured to suitable anchoring points and without permanent vehicle modifications, the system is normally treated as secured cargo rather than a fixed conversion. Requirements may vary according to the country, vehicle, inspection authority and accessories installed. Permanent electrical, gas, heating, window or roof installations may require separate approval.
Citroën Jumper Camper Conversion Kit – Also Available for Boxer, Ducato and Current Movano
Versatile New Design Removable Camper Furniture for Cargo, Combi and Passenger Vans
Convert your Citroën Jumper into a practical camper van with our New Design removable camper furniture kit, created for travel, camping and everyday vehicle use.
The self-install modular system can be quickly fitted, folded or removed without permanently altering the vehicle. Depending on the model year, body length and original seating layout, selected configurations can retain 3, 5 or 6 usable seats.
Before manufacturing, we confirm the exact vehicle, interior configuration, seats to be retained and available anchoring points.
🔹 Quick, Removable Self-Installation
The Citroën Jumper camper furniture is supplied as a removable system designed for straightforward installation in compatible vehicles.
It does not require permanent structural alterations and must always be correctly secured to suitable factory anchoring or load-securing points before travelling.
Removable Use and ITV / MOT Requirements
When used as removable furniture, properly secured and without permanent vehicle modifications, the Citroën Jumper Camper Box is normally treated as secured cargo rather than a fixed camper conversion.
Local requirements can vary according to the country, vehicle classification, inspection authority and accessories installed. Permanent electrical, gas, heating, window or roof installations may require separate approval or homologation.
🔹 Compact Rear Storage and Everyday Usability
When folded, the New Design camper furniture and its made-to-measure dark grey mattress pack remain neatly stored inside the rear cargo area.
This helps preserve:
Practical everyday cargo or passenger use
An organised, factory-style interior
Secure storage for the camper equipment
Rear visibility whenever permitted by the vehicle and selected module height
In Cargo and Panel Van configurations, the system is secured using suitable original load-securing points whenever compatible with the selected installation.
Materials Available for the Citroën Jumper Camper Furniture Kit
Four Furniture Options with a Made-to-Measure Dark Grey Mattress Pack Included
The Citroën Jumper camper furniture kit is available in four different materials. Each option includes the made-to-measure modular dark grey mattress pack.
The New Design refers to the camper furniture system, incorporating the latest improvements to its structure, functionality and storage layout.
Final weight varies according to the vehicle, bed width, side modules and selected configuration.
🔹 White Laminated MDF – €850 with Mattress Pack Included
Affordable option for occasional camper use
12 mm thickness
Clean white laminated finish
Practical and economical
Smooth surface that is easy to maintain
Suitable for occasional trips and customers looking for the lowest-priced option
Considerations:
White laminated MDF is more sensitive to impacts and water than the plywood alternatives. For this reason, it is available for workshop collection only and cannot be shipped.
🔹 Natural Pine Phenolic Plywood – €900 with Mattress Pack Included
Natural wood finish with excellent value for money
15 mm thickness
Visible natural wood grain
Warm, rustic camper appearance
Strong and suitable for regular travel
Phenolic protection between the internal layers helps resist humidity and condensation
Excellent balance between price, durability and natural appearance
Consideration:
The natural exterior remains more porous than HPL and should be protected from prolonged exposure to water.
🔹 Creamy White Poplar Plywood – €925 with Mattress Pack Included
Light-coloured, resistant and easy to handle
15 mm thickness
Creamy white natural tone with subtle wood grain
Lightweight construction suitable for large camper modules
High resistance to humidity
Strong and difficult to crack or splinter
Bright finish that creates a lighter-looking interior
Consideration:
Poplar has a slightly softer surface and may mark under concentrated pressure from keys or other hard objects.
🔹 Dark HPL Coachbuilder Plywood – €950 with Mattress Pack Included
Maximum resistance and an easy-clean professional finish
15 mm thickness
Very dark brown, almost black appearance
Most resistant and durable option in the range
Waterproof internal and external protection
Hard-wearing HPL surface
Easy to clean after intensive camper use
Recommended for frequent travel, professional use or rental vehicles
Consideration:
It has a more industrial appearance than natural wood, although it integrates particularly well with the dark grey mattress pack.
Material prices are reference prices and may change. The online store shows the current price and available configuration options before ordering.
Camper Furniture Kit Materials – Differences, Properties & Durability
Citroën Jumper Camper Box – 35L Slide-Out Fridge Drawer Example
Features of the Citroën Jumper Camper Furniture Kit
Pull-Out Kitchen, Multi-Height Table, Modular Storage and Full-Width Sleeping Configuration
The Citroën Jumper Camper Box combines the principal functions needed for travelling and camping in a removable, space-efficient layout.
Closely related versions are available for the Peugeot Boxer, Fiat Ducato and Opel Movano from 2021 onwards. We also manufacture separately adapted camper furniture kits for the Ford Transit, Renault Master and Mercedes-Benz Sprinter.
The final furniture configuration is always adapted to the exact vehicle, body length, interior trim, seating arrangement and available anchoring points.
🔹 Custom Pull-Out Kitchen Drawer and Rear Storage Trunk
The New Design camper furniture includes a made-to-measure pull-out kitchen drawer prepared for a compatible Campingaz-style single-burner stove or another suitable compact model.
The stove is an optional accessory and is only included when expressly selected.
Behind the kitchen drawer, an independent top-access storage trunk provides practical space for:
Cookware and kitchen utensils
Food and drinks
Water containers
Camping equipment
Frequently used travel accessories
🔹 Multi-Height Table for Indoor and Outdoor Use
The central multi-height table can be configured for several uses:
Indoor dining mode
Lounge or living-room mode
Relaxed hammock-style position
Outdoor camping table
The different positions and the furniture deployment can be seen in the demonstration video on this page.
🔹 Double-Access Left Storage Area
Depending on the selected configuration, the left side of the Citroën Jumper camper furniture can include two storage compartments with:
Top access
Front access
A practical double-opening design
The rear-left compartment can be prepared for the recommended Coolzone 35L compressor fridge.
Fridge compatibility is determined by its external measurements rather than its advertised capacity. The standard space accepts models up to approximately 35 cm wide and 50 cm high, although the final available length depends on the selected drawer and furniture configuration.
The front-access compartment can be used for a 12V outdoor shower system, water container or other camping accessories. The fridge, shower and related equipment are optional and are not included unless expressly selected.
⭐ Our Recommended Storage Configuration
We recommend the double-access left trunk because it provides the best balance between storage capacity and accessibility.
It can be used for:
A water container for the outdoor shower
Shower equipment and accessories
A portable toilet
General camping equipment
For better use of the available space, the portable toilet can be stored inside the central table compartment. Once the bed is deployed, it can be moved temporarily to the front area of the vehicle when needed, leaving the left trunk available for water and other equipment.
🔹 Optional Side Modules for a Wider Bed
Optional side modules can be added over compatible wheel-arch areas, extending the sleeping platform towards the interior walls.
Each side module includes a top-opening storage compartment, suitable for:
Bedding and blankets
Pillows
Clothes and footwear
Personal belongings
Frequently used travel accessories
The exact side-module dimensions depend on the wheel arches, interior lining, rear air-conditioning equipment and shape of the vehicle.
🔹 Optional Double-Drawer Configuration
A double-drawer layout can be manufactured, although we normally recommend one large storage trunk instead.
The double-drawer configuration:
Reduces usable internal volume
Adds extra wooden structures inside the furniture
Places greater long-term leverage on full-extension runners
Provides less flexibility for storing bulky equipment
Even when reinforced runners are used, a single large trunk normally offers better capacity, durability and everyday practicality.
🔹 Furniture Finishes and Long-Term Durability
The New Design Citroën Jumper camper furniture prioritises:
Structural strength
A compact and reinforced layout
Practical access to every compartment
Long-term reliability
Visual integration with the vehicle interior
Available finishes include white laminated MDF, natural pine phenolic plywood, creamy-white poplar plywood and dark HPL coachbuilder plywood.
Every material option includes a separate made-to-measure modular dark grey mattress pack, creating a clean and coordinated interior finish.
Citroën Jumper Camper Kit Dimensions
Bed Width, Furniture Depth and Modular Mattress Measurements
Measurements vary according to whether the furniture is installed in a Cargo, Panel Van, Combi or passenger version.
The standard reference measurements are:
Main furniture width: approximately 170 cm
Sleeping width with compatible side modules and mattress pack: approximately 180 cm
Furniture depth when folded: approximately 120 cm
Extended bed length: approximately 185–190 cm
All measurements are confirmed before manufacturing because interior panels, wheel-arch covers, rear air-conditioning units and passenger layouts can alter the usable space.
🔹 Made-to-Measure Dark Grey Mattress Pack Included
The mattress pack is produced specifically for the selected Citroën Jumper configuration and is included with every furniture material.
Its modular sections are designed to:
Create a stable and comfortable sleeping surface
Provide access to individual trunks without removing the complete mattress
Support dining and lounge configurations
Keep the joints between sections as discreet as possible
Store neatly with the furniture when the system is folded
Weight Distribution and Seat-Friendly Support
The Citroën Jumper camper furniture distributes the sleeping load across two main support zones:
The reinforced rear furniture module
The folding bed extension
Depending on the chosen configuration, the folding extension rests either on suitably folded rear seats or on dedicated support legs when the vehicle is used without rear seats.
The furniture also includes a designated storage area for the table leg and bed support legs, keeping these components organised and preventing unnecessary movement while travelling.
The number of passenger seats that can remain usable depends on the original seating arrangement, body length and selected furniture configuration. Compatible layouts may retain 3, 5 or 6 seats, subject to confirmation before manufacturing.
🔹 Installation Height
The reference installation heights are:
Without rear seats: approximately 44 cm as standard
Selected made-to-measure layouts without seats: approximately 40–44 cm
With compatible folded rear seats: approximately 55–56 cm, according to the height of the original seats
These measurements ensure that the folding platform aligns correctly with its support points and creates a stable sleeping surface.
Citroën Jumper Camper Kit Installation, Weight Distribution and Daily Use
Quick Removable Setup, Secure Fixing and Seat-Friendly Support
The Citroën Jumper Camper Box is designed as a removable, self-install furniture system that can be fitted, folded or removed according to how you need to use the vehicle.
A dedicated internal compartment stores the table leg and bed support legs, keeping these components organised and helping prevent movement or rattling while driving.
Two-Zone Weight Distribution System
The Citroën Jumper camper furniture distributes the sleeping load across two principal support zones:
Rear furniture module: the main reinforced structure positioned inside the cargo area.
Folding bed platform: the deployable section supported either by compatible folded passenger seats or dedicated folding legs when installed without rear seats.
When the folding platform is designed to rest on the seats, its contact points are adapted to the confirmed seating configuration to distribute the load across the supported area.
Correct installation, suitable load distribution and proper securing of the complete module are essential before using or travelling with the system.
Quick Removable Installation and Secure Fixing
The camper furniture can be installed and removed quickly in compatible Citroën Jumper, Peugeot Boxer, Fiat Ducato and current-generation Opel Movano layouts.
The system must always be secured using suitable original anchoring or load-securing points before travelling. The exact attachment method is confirmed according to the vehicle and selected furniture configuration.
Everyday Use with the Furniture Folded
When not being used as a bed, the New Design furniture and its made-to-measure dark grey mattress pack can remain folded inside the rear cargo area.
This keeps the equipment organised while preserving practical space for everyday passenger, work or cargo use. The remaining cargo capacity and rear visibility depend on the vehicle body, furniture height and selected configuration.
Compatible Seating Layouts and Installation Heights
Depending on the body length and original passenger configuration, selected layouts can retain between 3 and 7 usable seats. The exact number must be confirmed before manufacturing.
The reference furniture heights are:
With compatible rear seats folded: approximately 55–56 cm
Without rear seats: approximately 44 cm as standard
Special configurations without seats: other heights within approximately 40–44 cm can be evaluated individually
The height is determined by the seats, interior trim, wheel arches and support points required to create a level sleeping platform.
When used as removable furniture, properly secured and without permanent vehicle modifications, the system is normally treated as secured cargo rather than a fixed camper conversion. Requirements may vary according to the country, vehicle classification, inspection authority and accessories installed.
Citroën Jumper Camper Furniture and Optional Independent Kitchen Unit
All furniture materials are supplied with the made-to-measure modular dark grey mattress pack included.
👉 View the Citroën Jumper camper furniture kit and available configurations:
The spacious Citroën Jumper interior can also be combined with our independent California-style sink and kitchen unit. This is a separate optional product whose dimensions and installation position must be adapted to the available interior space.
👉 View the independent camper sink and kitchen unit:
https://www.kitmueblecamper.com/p/camper-sink-kitchen-unit-compatible-with-camper-furniture-kits/
Citroën Jumper Full Camper Conversion – Complete Interior Motorhome Build
Custom Camper Furniture Kit for Citroën Jumper with Mattress Pack Included – 800€
Available Configurations & Compatible Accessories for the Citroën Jumper Camper Box
Customize Your Citroën Jumper Camper Box with Functional Add-Ons
The Citroën Jumper Camper Furniture Kit can be combined with optional accessories to improve cooking, water storage, privacy, electrical autonomy and year-round comfort.
Available options depend on the Jumper generation, L1–L4 body length, H1–H3 roof height, Cargo, Combi or Passenger layout and the available interior space.
Compatible Accessories for the Citroën Jumper
✅ Foldable Camper Sink with Drain Plug
A compact washing solution designed to work with the portable 12V shower while occupying considerably less space than a conventional fixed sink.
✅ 12V Outdoor Camper Shower with Portable 20L Water Tank
Suitable for showering, washing dishes, cleaning equipment or rinsing bicycles outside the vehicle.
https://www.kitmueblecamper.com/p/12v-outdoor-camper-shower-20l-portable-water-tank/
✅ Custom Campingaz 1-Burner Stove
Compatible with the made-to-measure rear kitchen drawer of the Citroën Jumper camper furniture.
https://www.kitmueblecamper.com/p/custom-campingaz-1-burner-stove-for-our-camper-furniture/
✅ Sliding Fridge Support with Folding Brackets
This optional configuration provides easier access to the compressor fridge. Its dimensions and position are selected when ordering the Citroën Jumper camper kit.
✅ Coolzone 35L Compressor Fridge
Our recommended compressor fridge for compatible rear compartments and optional sliding fridge supports.
✅ Nine-Layer Thermal Blackout Covers
Designed to improve privacy and thermal insulation inside compatible Citroën Jumper Cargo, Combi and Passenger configurations.
https://www.kitmueblecamper.com/p/blackout-shades-thermal-insulation-for-camper-vans1/
✅ 2+1 Modular Camper Furniture Configuration
This layout allows one section of the furniture to be removed when additional space is required for bicycles, surfboards, work equipment or larger luggage.
https://www.kitmueblecamper.com/p/en-modalidad-2-1/
✅ Auxiliary Battery with Optional Inverter
Provides independent power for the compressor fridge, lighting, USB connections, 12V accessories and compatible 230V equipment.
https://www.kitmueblecamper.com/en/camperizar-furgoneta/bateria-camper/
✅ Independent California-Style Camper Sink and Kitchen Unit
A separate furniture module with clean and waste-water tanks, storage compartments, drawers and a 12V water pump. It can be combined with the rear Citroën Jumper Camper Box when the available layout allows.
https://www.kitmueblecamper.com/p/camper-sink-kitchen-unit-compatible-with-camper-furniture-kits/
✅ Stationary Heater with Digital Controller
A stationary heating system may be added subject to vehicle compatibility, available installation space and applicable regulations.
https://www.kitmueblecamper.com/p/en-calefaccion-estacionaria/
Product availability and specifications should always be checked on the corresponding product page. Fixed electrical systems, stationary heaters and other permanent installations may require professional fitting, certification or approval depending on the vehicle and applicable local regulations.
How to Order Your Citroën Jumper Camper Kit with Accessories
Choose the required camper furniture configuration and add the compatible accessories individually to your order.
For compatibility advice, tell us your Citroën Jumper model year, L1–L4 body length, H1–H3 roof height, Cargo, Combi or Passenger configuration and the number of seats you want to retain.
📲 WhatsApp:
Citroën Jumper Camper Furniture Kit Installation: Quick Setup, Secure Fixing and Everyday Use
Quick Removable Setup: Convert Your Citroën Jumper in Minutes with No Fixed Installation
The Citroën Jumper Camper Furniture Kit is designed for quick and reversible installation. Position it, secure it and prepare the vehicle for travelling; when you need the van for everyday use, the module can be removed or folded according to the selected configuration.
Secure Fixing While Driving: Cargo Tie-Down Points and Stable Transport
The camper furniture is secured using the vehicle's cargo tie-down points or anchoring rings where available, depending on the Citroën Jumper version.
The kit also includes a dedicated compartment for storing the table leg, keeping it properly secured and preventing loose movement or unwanted noise while driving.
Everyday Use with the Module Folded: Organized Rear Area and Visibility Depending on the Version
When travelling, the New Design camper furniture can remain folded inside the rear cargo area, together with its made-to-measure dark grey mattress pack:
In Combi or Passenger models with rear windows, this helps preserve rear visibility and keeps the camper equipment discreet.
In Cargo or Panel Van models, the module remains folded and properly secured using suitable anchoring points, keeping the interior organized.
Detailed Citroën Jumper Compatibility: L1–L4, Cargo, Combi and Passenger Layouts
Before confirming the order, we check:
Body length: L1, L2, L3 or L4
Vehicle version: Cargo, Panel Van, Combi or Passenger
Generation: 1993–2002, 2002–2006, 2006–2014 or 2014–present
Actual interior layout: linings, cargo rings, wheel arches, plastic trim and available anchoring points
Seats to retain: 3, 5 or 6, depending on the vehicle
The most suitable furniture height and configuration for its intended use
Frequently Asked Questions about the Citroën Jumper Camper Box
Which Citroën Jumper sizes and layouts are compatible with the camper kit?
The kit can be adapted to compatible Citroën Jumper L1, L2, L3 and L4 bodies and H1, H2 and H3 roof heights, including Cargo, Panel Van, Combi and Passenger layouts. Before manufacturing, we confirm the model year, body length, roof height, seating arrangement, interior trim, wheel arches and available anchoring points.
Does the Citroën Jumper camper kit require homologation?
When used as removable furniture, properly secured with suitable anchoring points and without permanent vehicle modifications, the system is normally treated as secured cargo rather than a fixed conversion. Requirements vary by country, vehicle, inspection station and installed accessories. Permanent electrical, gas, heating, window or roof modifications may require separate approval.
Can passenger seats remain usable with the Citroën Jumper camper box?
Selected passenger seats can remain usable depending on the body length, model year, original seating layout and selected camper configuration. We confirm the number of seats that can be retained before manufacturing.
What are the bed dimensions for the Citroën Jumper camper kit?
Depending on the configuration, the folding bed is approximately 185–190 cm long and approximately 170–180 cm wide with the side modules and mattress pack installed. The main furniture module is approximately 120 cm deep. Final dimensions are confirmed according to the specific vehicle interior.
What is included with the Citroën Jumper camper furniture kit?
The kit includes the New Design removable camper furniture, folding bed system, made-to-measure dark grey mattress pack, rear pull-out kitchen drawer, multi-height indoor and outdoor table, storage compartments and the required furniture supports. Appliances and other accessories are included only when expressly selected.
Which materials, fridge and accessories are available for the Citroën Jumper camper conversion?
The furniture is available in 15 mm poplar plywood, natural phenolic plywood and HPL phenolic plywood. The Coolzone 35L compressor fridge is recommended for compatible layouts. Optional accessories include a foldable sink, 12V shower, Campingaz-style stove, thermal blackout covers, 2+1 configuration, auxiliary battery, independent sink and kitchen unit and stationary heater.
Can the independent camper sink and kitchen unit be combined with the Citroën Jumper kit?
Yes. The independent California-style camper sink and kitchen unit is a separate optional product that can be combined with the Citroën Jumper camper kit when the vehicle layout and available space allow. Compatibility is assessed before the order is confirmed.
Customer Reviews of Kit Muebles Camper
4.9/5 Rating Based on 51 Customer Reviews
Our customers value the practicality, strength and everyday usability of our removable camper furniture kits.
Many reviews highlight the quick setup, storage capacity, comfortable made-to-measure mattress pack and the ability to alternate between everyday vehicle use and camper mode.
Google Reviews from Spain and France
Read customer experiences and see photographs of real camper furniture installations through our Google Maps profiles:
🇪🇸 Madrid – Arganda del Rey
https://maps.app.goo.gl/YR3S8WCe1pqdb1Xb7
🇪🇸 Barcelona – Tordera
https://maps.app.goo.gl/bHjBo51GtmkenoCa7
🇪🇸 Seville – Écija
https://maps.app.goo.gl/13MZuMieqKebSP9w6
🇫🇷 France – Narbonne / Argeliers Area
https://maps.app.goo.gl/6HwG9uanwFepyD6cA
Order Your Citroën Jumper Camper Furniture Kit
Two Direct Online Shop Options for Your Citroën Jumper Conversion
Transform your compatible Citroën Jumper into a practical camper with a removable, made-to-measure furniture system suitable for travelling, camping and everyday vehicle use.
🟢 Citroën Jumper Camper Furniture Kit with Made-to-Measure Dark Grey Mattress Pack Included:
https://www.kitmueblecamper.com/p/citroen-jumper-camper-camper-furniture-kit-with-mattress-pack-included/
🟢 Independent Camper Sink and Kitchen Unit Compatible with Camper Furniture Kits:
https://www.kitmueblecamper.com/p/camper-sink-kitchen-unit-compatible-with-camper-furniture-kits/
📲 Request compatibility advice or a customized configuration through WhatsApp:
Thanks Be to God
Every Project, Journey and Opportunity Begins with Him
Thank you for trusting Kit Muebles Camper.
Above all, thanks be to God for every project, every journey and every opportunity to serve.
"I can do all things through Christ who strengthens me." — Philippians 4:13
Juan Jose