Cart
0
0.00 €
VW T6/T6.1 Transporter Camper Box and Removable Furniture Kit
Removable, self-install camper furniture for compatible VW T6 and T6.1 Transporter SWB/LWB panel van, cargo and Kombi layouts, with a 185–190 cm folding bed, New Design dark grey mattress pack, rear kitchen, multi-height table, modular storage and Coolzone 35L fridge compatibility.
Removable VW T6/T6.1 Transporter Camper Kit for Panel Van, Cargo and Kombi Layouts
Camper Furniture with a 185–190 cm Camper Bed, New Design Mattress Pack, Rear Kitchen and Modular Storage
Transform your VW Transporter T6 or T6.1 into a practical camper van with a removable, self-install camper furniture kit designed for camping, road trips and everyday vehicle use.
The system is available for compatible VW T6 and T6.1 Transporter models, including short-wheelbase (SWB/L1) and long-wheelbase (LWB/L2) panel van, cargo and Kombi configurations. Before manufacturing, we confirm the exact model year, wheelbase, seating arrangement, cargo partition, interior lining, wheel arches, rear air-conditioning equipment and available anchoring points.
The VW T6/T6.1 Transporter camper kit can include:
✅ A folding camper bed approximately 185–190 cm long and up to 150–155 cm wide in compatible layouts with side modules.
✅ A made-to-measure New Design dark grey mattress pack, included with every furniture material.
✅ A rear pull-out kitchen drawer prepared for a compatible Campingaz-style stove.
✅ A multi-height table for indoor dining, lounge mode and outdoor use.
✅ Several storage trunks and compartments for food, clothes, water, camping equipment or a portable toilet.
✅ Side storage modules covering compatible wheel-arch areas and extending the sleeping surface across the rear interior.
✅ A dedicated compartment or optional sliding support for the recommended Coolzone 35L compressor fridge.
✅ A compact folding structure adapted to compatible VW Transporter layouts with or without rear seats.
When folded, the removable VW T6/T6.1 camper box remains within the rear cargo area, helping the Transporter stay practical for work, equipment transport and everyday driving.
In compatible Kombi and passenger-capable layouts, selected original rear seats can remain installed and usable. The exact number of seats and final bed dimensions depend on the wheelbase, original interior, cargo partition and selected furniture configuration.
When installed as removable furniture without permanent structural modifications, the kit is normally treated as correctly secured cargo rather than a fixed camper conversion. It must always be properly secured while travelling, and local requirements should be checked according to the country, vehicle and accessories installed.
👉 Buy the VW T6/T6.1 Transporter camper furniture kit with New Design mattress pack included:
VW T6/T6.1 Transporter Camper Box-Removable Camper Kit with Mattress Pack-Special Offer 750€
VW T6/T6.1 Transporter Camper Box – Removable Camper Kit with Mattress Pack Included
VW Transporter Camper Box – Removable Camper Kit with Accessories and Second Battery Installation
Custom Camper Furniture Kit for VW T6 and T6.1 Transporter
Made-to-Measure Removable Furniture for SWB, LWB, Panel Van, Cargo and Kombi Layouts
We specialize in custom-made removable camper furniture kits, and this configuration has been developed specifically for compatible VW Transporter T6 and T6.1 vans.
The Transporter family includes several generations, but each one has different interior dimensions, trim and anchoring systems. For this reason, the VW T6/T6.1 Transporter Camper Box is manufactured independently from our T4, T5 and T7 furniture kits.
It can be adapted to selected short-wheelbase (SWB/L1) and long-wheelbase (LWB/L2) panel van, cargo and Kombi layouts.
Before manufacturing, we confirm the vehicle's exact model year, wheelbase, seating arrangement, cargo partition, interior lining, wheel arches, rear air-conditioning equipment and available anchoring points. This ensures that every component fits the selected configuration correctly.
The VW T6/T6.1 Transporter camper furniture kit combines a folding sleeping platform, custom mattress pack, rear kitchen, multi-height table and modular storage in one compact system.
When folded, the furniture remains within the rear cargo area, allowing the Transporter to stay practical for work, equipment transport and everyday driving. When unfolded, it creates a comfortable and functional camper setup for weekend getaways, camping holidays and longer road trips.
The result is a versatile, removable and space-efficient camper conversion that maintains the practicality and reliability associated with the VW Transporter range.
VW T6/T6.1 Transporter Camper Conversion Kit
Self-Install Removable Camper Furniture for SWB and LWB Vans
Convert your VW T6 or T6.1 Transporter into a practical camper van with a removable, self-install camper furniture kit designed for travel, camping and everyday vehicle use.
The modular system can be adapted to compatible configurations with 2, 3, 5 or 6 usable seats. In selected long-wheelbase (LWB/L2) layouts, the original rear seats can remain installed while the camper furniture is stored in the luggage area.
The exact configuration depends on the model year, wheelbase, original seating arrangement, interior trim, cargo partition, wheel-arch covers, rear air-conditioning equipment and available anchoring points. We confirm these details before manufacturing to ensure the kit fits your van correctly.
The VW T6/T6.1 Transporter Camper Box does not require drilling or permanent structural modifications. When used as a removable system, it is normally transported as correctly secured cargo rather than as a fixed conversion.
Homologation and vehicle-inspection requirements can vary according to the country, vehicle classification and accessories installed. The furniture must always be properly secured while travelling, and local regulations should be checked before use.
When folded, the camper furniture and custom mattress pack remain compactly stored inside the rear luggage area. In compatible layouts, you can also retain the original parcel shelf, helping to preserve:
✅ Rear visibility.
✅ A discreet, factory-style appearance.
✅ Everyday passenger and cargo functionality.
✅ A fully reversible camper conversion.
Materials for the VW T6/T6.1 Transporter Camper Furniture Kit
Choose a Lightweight, Moisture-Resistant or Heavy-Duty Finish
The VW T6/T6.1 Transporter camper furniture kit is available in three carefully selected 15 mm plywood materials.
Every material option includes the corresponding made-to-measure New Design dark grey mattress pack. The best choice depends on whether you prioritize minimum weight, a natural wood appearance or maximum resistance and easy cleaning.
🌿 Poplar Plywood — Light Natural Finish
✅ Very light, pale-colored wood with subtle natural grain.
✅ The lightest material available, making the removable modules easier to install, handle and store.
✅ Moisture-resistant and suitable for normal camper use, although it is not completely waterproof.
✅ Strong, flexible and resistant to cracking or splintering.
✅ Particularly suitable when reducing the overall furniture weight is a priority.
The surface is softer than the other available materials, so it may develop small pressure marks if it comes into contact with keys or other hard objects.
🌲 Natural Phenolic Plywood — Warm Wood Finish
✅ Medium-light natural wood tone with visible grain.
✅ Stronger and more resistant to surface marks than poplar plywood.
✅ Phenolic construction provides excellent resistance to moisture, occasional water exposure and intensive camper use.
✅ Offers a warm, natural appearance similar to a traditional cabin interior.
✅ Provides a good balance between manageable weight, strength and durability.
Its natural surface is more porous than HPL, so spills should be cleaned and dried after use.
🪵 HPL Phenolic Plywood — Dark Coachbuilder-Grade Finish
✅ Dark brown, almost black appearance with a professional finish.
✅ The most resistant and hard-wearing material available.
✅ HPL-coated surface with excellent resistance to moisture, scratches and everyday wear.
✅ Smooth, non-porous finish that is particularly easy to clean.
✅ Recommended for families, frequent travellers and intensive camper use.
This option is slightly heavier than poplar or natural phenolic plywood, but remains suitable for a removable camper furniture system.
Which Material Should You Choose?
Choose Poplar Plywood if minimum weight and easy handling are your priorities.
Choose Natural Phenolic Plywood if you prefer a warm wood finish with greater resistance to moisture and surface marks.
Choose HPL Phenolic Plywood if you want the most durable, easy-to-clean and professional finish.
👉 View the current materials, configurations and prices for the VW T6/T6.1 Transporter camper furniture kit:
Camper Furniture Kit Materials – Differences, Properties & Durability
Features of the VW T6/T6.1 Transporter Camper Furniture Kit
Rear Kitchen, Multi-Height Table, Modular Storage and Optional 35L Compressor Fridge
The VW T6/T6.1 Transporter Camper Box combines cooking, dining and storage functions within a compact removable structure designed for compatible SWB and LWB layouts.
Depending on the selected configuration, the camper furniture can include:
✅ Rear pull-out kitchen drawer. Designed for a compatible Campingaz-style single or double-burner stove, providing convenient access from the rear of the van.
✅ Independent rear storage chest. Located behind the kitchen drawer and equipped with a top-opening lid for cookware, food or camping equipment.
✅ Multi-height table. Suitable for indoor and outdoor use. Inside the van, it can be positioned for dining or lowered to create a comfortable lounge configuration.
✅ Central top-access storage. An additional chest behind the table provides easily accessible space for everyday travel equipment.
✅ Dual-access side compartments. Selected modules can be opened from both the top and front, making stored equipment accessible with the bed either folded or deployed.
✅ Space for a 12V outdoor shower. The front-access compartment can be configured to hold a compatible 20L water container and external shower system.
✅ Dedicated compressor-fridge compartment. The rear side module can be adapted for the recommended Coolzone 35L compressor fridge.
In a fully equipped compatible layout, the rear furniture system can provide:
Two main top-access storage chests
Three front or side-access compartments
Two additional storage areas when side modules are installed
The exact number, position and dimensions of the compartments depend on the wheelbase, original interior trim, wheel arches, rear air-conditioning equipment and selected camper configuration.
Compressor Fridge Placement for the VW T6/T6.1 Camper Box
Choose Between a Rear Compartment and an Optional Slide-Out Fridge Support
The 35L compressor fridge can be integrated into the VW T6/T6.1 Transporter camper furniture in two principal positions:
✅ Rear top-access compartment, keeping the fridge securely stored within the main camper structure.
✅ Front slide-out fridge support, allowing direct access from inside or from the side door in compatible layouts.
The best position depends on how you intend to use the van. Rear placement preserves more open space at the front, while a slide-out support provides faster access without lifting the top lid.
Before manufacturing, we confirm the selected fridge, its dimensions, ventilation requirements, opening direction and the available space inside your VW T6 or T6.1 Transporter.
For compatible configurations, we recommend the Coolzone 35L compressor fridge. Its compact format, efficient compressor cooling and 12V/24V compatibility make it a practical option for road trips, camping and off-grid travel.
👉 View the Coolzone 35L compressor fridge:
VW T6/T6.1 Transporter Camper Box – 35L Slide-Out Fridge Drawer Example
Recommended Layout and Storage for the VW T6/T6.1 Transporter Camper Box
Dual-Access Storage, Wheel-Arch Modules and a Practical Long-Term Design
For most VW T6 and T6.1 Transporter configurations, we recommend a left-hand storage chest with both top and front access.
Based on our experience manufacturing removable camper furniture, this layout provides excellent use of the available space and makes equipment accessible whether the camper bed is folded or fully deployed.
The compartment can be used to store:
✅ A 20L water container and 12V outdoor shower system.
✅ A portable toilet or Potti.
✅ Food, clothing or frequently used camping equipment.
For improved organization, we normally recommend storing the portable toilet inside the central table compartment. Once the camper kit is deployed, it can be moved temporarily to the front of the van when using the table.
This leaves the dual-access side chest available for the shower container, water supply or other travel equipment.
Side Storage Modules and Wheel-Arch Covers
In compatible VW T6/T6.1 Transporter layouts with exposed wheel arches, the camper kit can include two removable side modules measuring approximately 16 cm wide each.
These modules cover the wheel-arch areas and extend the sleeping platform towards the interior walls, creating a wider and more comfortable bed.
Each side module incorporates a top-opening storage compartment, suitable for bedding, towels, clothes or small camping accessories.
A practical organization system is to reserve one side for clean bedding and the other for used clothes or everyday travel equipment.
Single-Drawer or Double-Drawer Configuration
A double-drawer configuration can be produced on request. However, for most customers, we recommend the more practical single pull-out drawer and independent storage-chest layout.
A double-drawer system:
Reduces the available internal storage volume.
Adds extra wood, runners and overall weight.
Creates greater leverage on the full-extension runners.
Requires more components and maintenance over prolonged use.
Even when reinforced runners are installed, the single-drawer configuration normally provides the best balance between storage capacity, accessibility and long-term durability.
Durable Materials and Coordinated Interior Finishes
Every VW T6/T6.1 Transporter Camper Box is designed to remain compact, stable and practical throughout years of travel and everyday use.
The available plywood finishes can be combined with our New Design dark grey mattress pack, creating a clean appearance that integrates naturally with most VW Transporter interiors.
With correct installation, secure transport and appropriate care, the camper furniture is designed to provide a long and reliable service life.
VW T6/T6.1 Camper Bed and Furniture Dimensions
A 185–190 cm Bed with Up to Approximately 152–155 cm of Sleeping Width
The final dimensions of the VW T6/T6.1 camper bed depend on the wheelbase, original seating arrangement, interior trim, visible wheel arches and rear air-conditioning equipment.
The approximate measurements for compatible configurations are:
✅ Main furniture platform width: approximately 120 cm.
✅ Main furniture depth when folded: approximately 120 cm.
✅ Side storage modules: approximately 16 cm per side when the wheel arches are exposed.
✅ Total bed width with compatible side modules and mattress pack: approximately 152–155 cm.
✅ Extended bed length: approximately 185–190 cm.
Vehicles with plastic wheel-arch covers, rear air-conditioning ducts or different interior trim may require narrower modules or made-to-measure removable extensions.
We confirm the model year, wheelbase, seats and interior equipment before manufacturing to determine the correct furniture and mattress dimensions.
Custom New Design Mattress Pack Included
Every VW T6/T6.1 Transporter camper furniture kit includes a made-to-measure New Design dark grey mattress pack, regardless of the selected furniture material.
The mattress pack is manufactured from 8 cm high-density foam and divided into modular sections that correspond with the different furniture compartments.
This modular system is designed for:
✅ Sleeping mode.
✅ Dining mode.
✅ Lounge mode.
✅ Hammock position in compatible configurations.
Because each storage area has its own mattress section, individual compartments can be opened without removing or dismantling the entire bed.
The sections are cut to fit closely within the available sleeping area, helping prevent gaps and movement while creating a firm, even and comfortable sleeping surface.
👉 Learn more about our made-to-measure camper mattress packs:
Weight Distribution, Adjustable Heights and Secure Storage in the VW T6/T6.1 Transporter Camper Box
Dedicated Storage for the Table Leg and Bed Supports
The VW T6/T6.1 Transporter removable camper furniture kit includes a dedicated compartment for storing the table leg and folding bed supports.
Keeping these components inside their designated storage area helps to:
✅ Prevent movement and rattling while driving.
✅ Keep the luggage compartment clean and organized.
✅ Protect the supports when the camper bed is folded.
✅ Ensure every component remains available when the bed or table is deployed.
The furniture and all loose components must always be correctly positioned and secured before travelling.
Two-Part Bed Support and Weight Distribution System
When the camper bed is deployed, the structure distributes the load across two principal support areas:
Main Rear Camper Module
The largest and strongest section rests directly on the vehicle floor, creating a solid base for the storage compartments, kitchen drawer, table and rear section of the bed.
Folding Bed Extension
The front sleeping platform unfolds from the main module and can be supported in two different ways:
On the folded rear seats in compatible passenger or Kombi configurations.
On the supplied folding support system when the rear seats have been removed.
This two-part design distributes the load across the furniture platform and its corresponding support points, helping to create a stable and comfortable sleeping surface.
Does the Camper Bed Damage the Rear Seats?
In compatible configurations, the folding extension is designed to rest across the folded rear seats without concentrating the load on a single point.
The exact support arrangement depends on the original seats, their folded height and the selected furniture configuration. We confirm these details before manufacturing and adapt the camper module accordingly.
When the supports are correctly installed and the kit is used as intended, the system is designed to avoid unnecessary pressure or wear on the seats.
Adjustable Camper Furniture Heights for Different VW T6/T6.1 Layouts
With Rear Seats Installed — Approximately 55–61 cm
When the camper kit is configured to rest on folded rear seats, the furniture height is adapted to match the original seat-back level.
Depending on the vehicle and seat arrangement, the completed platform is normally positioned at approximately 55–61 cm high.
This configuration can allow selected 5 or 6-seat layouts to remain usable while the camper furniture stays stored in the rear luggage area. The exact number of usable seats must be confirmed for each vehicle.
Without Rear Seats — Approximately 40-44 cm
When the VW T6/T6.1 Transporter is used without rear seats, the camper furniture can normally be manufactured at approximately 40-44 cm high.
This lower configuration provides:
✅ More headroom above the bed.
✅ A lower and more accessible sleeping platform.
✅ More usable floor space after removing the rear seats.
✅ Storage beneath the bed without unnecessarily raising the sleeping surface.
The final height is selected according to the interior layout, wheel arches, furniture design, fridge position and required storage capacity.
Compatible VW T6/T6.1 Transporter Configurations and Finishes
The camper furniture can be adapted to compatible VW T6 and T6.1 Transporter SWB and LWB models, including selected panel van, cargo, passenger and Kombi layouts.
Before production, we confirm the model year, wheelbase, seating arrangement, interior trim, cargo partition, rear air-conditioning equipment and available anchoring points.
The camper kit is available in different furniture materials and finishes, all combined with the corresponding New Design dark grey custom mattress pack.
👉 View the available VW T6/T6.1 Transporter camper furniture configurations:
VW T6/T6.1 Transporter Camper Box – Removable Camper Kit to Keep the 3rd Row of Seats Installed – L2 Van Camper Conversion
Accessories for the VW T6/T6.1 Transporter Camper Box
Compatible Options for Comfort, Storage and Greater Travel Autonomy
The VW T6/T6.1 Transporter camper furniture kit can be combined with different accessories according to the vehicle layout and intended use.
✅ Coolzone 35L compressor fridge — compatible with the designated compartment or optional sliding support.
✅ Campingaz-style single-burner stove — designed for the rear pull-out kitchen drawer.
https://www.kitmueblecamper.com/p/custom-campingaz-1-burner-stove-for-our-camper-furniture/
✅ Foldable camper sink with drain plug — compact solution that can be integrated into the camper furniture.
✅ 12V outdoor shower with 20L water container — suitable for showering, washing dishes or cleaning outdoor equipment.
https://www.kitmueblecamper.com/p/12v-outdoor-camper-shower-20l-portable-water-tank/
✅ Nine-layer thermal blackout covers — improve privacy and help protect the interior from sunlight, heat, cold and condensation.
https://www.kitmueblecamper.com/en/oscurecedores-aislantes/
✅ 2+1 modular furniture configuration — remove one section to create additional space for a bike, surfboard or bulky equipment while retaining a single sleeping area.
https://www.kitmueblecamper.com/en/kit-mueble-camper/version-2-1/
✅ Auxiliary battery and camper power system — provides independent power for the fridge, lighting, USB connections and compatible 12V or 230V equipment.
https://www.kitmueblecamper.com/en/camperizar-furgoneta/bateria-camper/
✅ Independent camper sink and kitchen unit — adds a separate water and work area to compatible layouts.
https://www.kitmueblecamper.com/p/camper-sink-kitchen-unit-compatible-with-camper-furniture-kits/
✅ Compatible stationary heater — available for customers who require additional comfort during colder trips.
https://www.kitmueblecamper.com/p/en-calefaccion-estacionaria/
Sliding fridge supports, side storage modules and other furniture adaptations can be configured when ordering the camper kit.
Compatibility, installation requirements and current availability must be confirmed for the exact vehicle and selected accessory. Fixed electrical systems, heaters and other permanent modifications may require separate approval.
👉 View all camper furniture accessories:
https://www.kitmueblecamper.com/en/tienda-online/
Installing the VW T6/T6.1 Transporter Camper Kit
Removable, Self-Install Furniture with No Permanent Structural Modification
The VW T6/T6.1 Transporter Camper Box is supplied assembled and ready to be positioned inside the rear luggage or cargo area.
The main furniture module does not normally require drilling or permanent modification of the vehicle. Due to its size, we recommend handling it between two adults and securing it correctly using suitable existing anchoring points before travelling.
When parked, the folding bed platform deploys over the folded rear seats or the supplied support system, depending on the selected configuration. The modular mattress pack, table leg and bed supports have their own storage positions within the furniture.
Before manufacturing, we confirm the model year, SWB/L1 or LWB/L2 wheelbase, seating arrangement, cargo partition, interior lining, wheel arches, rear air conditioning and available anchoring points.
The camper furniture, supports and accessories must always remain correctly secured while travelling. Permanent electrical, gas, heating, window or roof modifications may be subject to separate approval requirements.
Frequently Asked Questions About the VW T6/T6.1 Transporter Camper Kit
Which VW T6 and T6.1 Transporter layouts are compatible with the camper kit?
The kit is available for selected VW Transporter T6 and T6.1 SWB/L1 and LWB/L2 panel van, cargo and Kombi layouts. Before production, we confirm the model year, wheelbase, seating arrangement, cargo partition, interior lining, wheel arches, rear air-conditioning equipment and available anchoring points.
Does the VW T6/T6.1 Transporter camper furniture kit require homologation?
When used as removable furniture, properly secured with suitable anchoring points and without permanent vehicle modifications, the system is normally treated as secured cargo rather than a fixed conversion. Requirements vary by country, vehicle and installed accessories, so local regulations should always be checked. Permanent electrical, gas, heating, window or roof modifications may require separate approval.
Can I retain the rear seats with the VW T6/T6.1 camper kit installed?
Selected Kombi and passenger-compatible layouts can retain usable rear seats. The exact number depends on the wheelbase, original seat arrangement, seat rails, cargo partition and selected furniture configuration. These details are confirmed before manufacturing.
What are the bed dimensions of the VW T6/T6.1 Transporter camper conversion kit?
The folding bed is approximately 185–190 cm long. The main furniture structure is around 120 cm wide, while compatible side modules or extensions can create a sleeping surface approximately 150–155 cm wide. Final dimensions depend on the interior trim, wheel arches, cargo partition, rear air conditioning and seat configuration.
What is included with the VW T6/T6.1 Transporter camper furniture kit?
The kit includes a folding bed structure, a made-to-measure New Design dark grey mattress pack, a rear kitchen drawer, a multi-height table, storage compartments and the required folding bed supports. The precise layout is adapted to the selected VW Transporter configuration.
Which materials, fridge and accessories are available for the VW T6/T6.1 camper box?
Furniture options include 15 mm Poplar plywood, natural Phenolic plywood and dark HPL Phenolic plywood. The recommended fridge is the Coolzone 35L compressor model. Depending on the layout, options may include a sliding fridge support, side modules, a 2+1 modular configuration, sink equipment, an outdoor shower, blackout accessories, an auxiliary power system or a compatible heater.
How does the VW T6/T6.1 Transporter camper kit differ from the Caravelle kit?
The Transporter kit is designed around panel van, cargo and Kombi interiors, where partitions, lining, exposed wheel arches and anchoring points can vary significantly. The Caravelle version is configured around a passenger-focused interior with original trim, seat systems and family-use requirements. Each kit is measured and manufactured for its specific vehicle layout.
Customer Reviews of Kit Muebles Camper
Rated 4.9 Out of 5 Based on 51 Customer Reviews
⭐ Overall customer rating: 4.9/5 from 51 reviews
Our customers particularly value:
✅ The quality and durability of the camper furniture.
✅ The practical removable and self-install design.
✅ The comfort of the made-to-measure mattress pack.
✅ The optimized storage and modular configurations.
✅ The personalized advice provided before manufacturing.
Read Our Customer Reviews by Location
Madrid – Arganda del Rey
https://maps.app.goo.gl/YR3S8WCe1pqdb1Xb7
Barcelona – Tordera
https://maps.app.goo.gl/bHjBo51GtmkenoCa7
Seville – Écija
https://maps.app.goo.gl/13MZuMieqKebSP9w6
France – Narbonne / Argeliers Area
https://maps.app.goo.gl/6HwG9uanwFepyD6cA
Order Your VW T6/T6.1 Transporter Camper Furniture Kit
Transform Your Van with a Removable Bed, Mattress, Rear Kitchen, Table and Storage
Tell us your vehicle's model year, wheelbase, interior layout, seating arrangement and preferred furniture material.
We will confirm compatibility and prepare the appropriate removable camper furniture configuration for your VW T6 or T6.1 Transporter.
👉 View and configure your VW T6/T6.1 Transporter Camper Furniture Kit:
👉 Request personalized compatibility advice through WhatsApp:
Thanks Be to God
Every Project, Journey and Opportunity Begins with Him
Thank you for trusting Kit Muebles Camper.
Above all, thanks be to God for every project, every journey and every opportunity to serve.
"I can do all things through Christ who strengthens me." — Philippians 4:13
Juan Jose