Cart
0
0.00 €
Citroën Jumpy Camper Furniture Kit – Removable Camper Conversion
Removable, self-install camper furniture for compatible Citroën Jumpy generations and body lengths, with a 185–190 cm bed, New Design mattress pack, rear kitchen, multi-height table, modular storage and Coolzone 35L fridge compatibility.
Removable Citroën Jumpy Camper Kit for Everyday Use and Travel
Custom Camper Box with Folding Bed, New Design Mattress Pack, Rear Kitchen and Modular Storage
Transform your Citroën Jumpy into a practical camper van with a custom removable camper conversion kit designed for travel, camping and everyday vehicle use.
The Citroën Jumpy camper furniture kit can be adapted to compatible first, second and third-generation vans. Before manufacturing, we confirm the model year, body length, cargo or passenger interior, seating arrangement, wheel-arch trim, rear air-conditioning equipment and available anchoring points.
The current Citroën Jumpy generation is available in different body lengths, commonly identified as XS, M and XL. Earlier generations use different length designations, so every Citroën Jumpy Camper Box is configured according to the exact vehicle rather than relying only on the commercial size name.
The removable camper system can include:
✅ A folding bed approximately 185–190 cm long, adapted to the selected vehicle and seating configuration.
✅ A made-to-measure New Design dark grey mattress pack, included with every furniture material.
✅ A rear pull-out kitchen drawer prepared for a compatible Campingaz-style stove.
✅ A multi-height table for indoor dining, lounge mode and outdoor use.
✅ Modular storage compartments for food, clothing, water, camping equipment or a portable toilet.
✅ Optional side modules or removable extensions adapted to the wheel-arch areas.
✅ A dedicated compartment or sliding support for the recommended Coolzone 35L compressor fridge.
✅ Configurations with or without rear seats, depending on the Jumpy generation, body length and original seat layout.
✅ A removable, self-install structure requiring no drilling or permanent body modifications.
When folded, the Citroën Jumpy removable camper kit remains compact inside the rear load area, helping preserve the vehicle's practicality for work, family transport and everyday use.
When used without fixed structural modifications, the camper furniture is normally treated as correctly secured cargo rather than a permanent conversion. It must always be properly fastened while travelling, and local requirements should be checked according to the country, vehicle and accessories installed.
👉 Buy the Citroën Jumpy Camper Furniture Kit with New Design mattress pack included:
Citroën Jumpy Camper Box – Removable Camper Kit with Mattress Pack Included
Citroën Jumpy Camper Box – Removable Camper Kit with Mattress Pack – Special Offer 750€
Citroën Jumpy Camper Box Compatibility – Generations, Body Lengths and Seat Layouts
Removable Camper Kit for Jumpy I, II and III, Including XS, M, XL, L1 and L2 Versions
We specialize in custom-made removable camper furniture kits, and our Citroën Jumpy Camper Box can be adapted to compatible first, second and third-generation vans.
Body-length names vary between generations. The current Citroën Jumpy is commonly identified as XS, M and XL, while earlier models may use designations such as L1 and L2. Before manufacturing, we confirm the model year, body length, cargo or passenger interior, seating arrangement, wheel-arch trim and available anchoring points.
Compatible Citroën Jumpy Generations
🚐 Citroën Jumpy I (1994–2006)
The first-generation Jumpy can be equipped with a compact removable camper conversion kit adapted to its original interior dimensions, rear seats and wheel-arch design.
🚐 Citroën Jumpy II (2007–2016)
The second generation is compatible with our modular camper furniture system. It shares its base platform with corresponding Peugeot Expert, Fiat Scudo and first-generation Toyota Proace models, although every layout is confirmed individually.
🚐 Citroën Jumpy III (2016–Present)
The current generation is available in XS, M and XL body lengths and shares its Stellantis platform with the Peugeot Expert and Traveller, Toyota Proace and Proace Verso, Opel Vivaro C and Zafira Life, and current Fiat Scudo.
The New Design Citroën Jumpy camper furniture kit is adapted to the exact interior trim, seating system, rear air-conditioning equipment and selected body length.
Removable Camper Kit for Travel and Everyday Vehicle Use
Depending on the vehicle and selected configuration, the Citroën Jumpy removable camper kit can preserve 2, 3, 5 or 6 usable seats while providing a folding bed, made-to-measure mattress pack, rear kitchen, multi-height table and modular storage.
✅ Quick self-installation and removal.
✅ No drilling or permanent structural modifications.
✅ Configurations adapted to cargo, Combi and passenger interiors.
✅ Compact storage inside the rear area when folded.
✅ Fully reversible for work, family transport and camper travel.
When used without permanent vehicle modifications, the furniture is normally treated as securely fastened cargo rather than a fixed conversion. It must always be correctly secured while travelling, and the applicable requirements should be checked according to the country, vehicle and accessories installed.
Citroën Jumpy Camper Conversion Kit – Seats, Daily Use and Reversible Installation
Removable Modular Camper Furniture for 2, 3, 5 or 6-Seat Configurations
The Citroën Jumpy camper conversion kit provides a practical way to transform your van into a camper without drilling or making permanent structural modifications.
Depending on the generation, body length and original seating arrangement, the removable furniture can be configured while retaining 2, 3, 5 or 6 usable seats.
Compatible long-body versions can provide enough rear space to keep additional seats installed while the Citroën Jumpy Camper Box remains folded inside the load area. The exact number of usable seats must be confirmed individually because seating systems and interior dimensions vary between generations.
✅ Quick self-installation and removal.
✅ Reversible system for camper, family and work use.
✅ Configurations with or without rear seats.
✅ Folding structure stored compactly in the rear area.
✅ No drilling or permanent modification of the vehicle body.
When travelling, the camper furniture must always be correctly secured using suitable anchoring points. When used as a removable system without permanent modifications, it is normally treated as securely fastened cargo rather than a fixed vehicle conversion.
Homologation and technical-inspection requirements can vary according to the country, vehicle and accessories installed. Permanently fitted electrical, gas, heating or structural equipment may be subject to additional regulations.
This practical design allows you to switch between everyday transport and camper mode while preserving the reversible character of your Citroën Jumpy.
Materials for the Citroën Jumpy Camper Furniture Kit
Compare 15 mm Poplar, Natural Phenolic and HPL Phenolic Plywood
The Citroën Jumpy camper furniture kit can be manufactured in three different 15 mm plywood materials. Each option offers a different balance of weight, appearance, moisture resistance, impact resistance and ease of maintenance.
Every furniture finish includes the made-to-measure New Design dark grey mattress pack. Prices can vary according to the Jumpy generation, body length, seating configuration, side modules and selected accessories.
🔹 Poplar Plywood – Lightweight Natural Finish
Poplar plywood is the lightest material available and is recommended for customers who want a removable Citroën Jumpy camper kit that is easier to install and remove.
✅ Very light natural colour, close to pearl white.
✅ Subtle wood grain and clean, modern appearance.
✅ 15 mm thickness.
✅ Excellent strength-to-weight ratio.
✅ Moisture-resistant treatment suitable for normal camper use.
✅ Easier to handle than the denser phenolic options.
⚠️ Please note: Poplar is softer than phenolic plywood and can develop small pressure marks when sharp or heavy objects are placed directly on its surface.
🔹 Natural Phenolic Plywood – Warm Rustic Finish
Natural phenolic plywood combines a visible wood grain with greater density and impact resistance, creating a warmer, cabin-style camper interior.
✅ Medium natural wood tone with visible grain.
✅ 15 mm thickness.
✅ Slightly heavier and more impact-resistant than poplar.
✅ Phenolic bonding provides high resistance to moisture and humid environments.
✅ Durable construction for frequent camper use.
✅ Natural finish that coordinates with the dark grey mattress pack.
⚠️ Please note: Its natural surface can be slightly more porous than an HPL finish and should be cleaned and maintained appropriately.
🔹 HPL Phenolic Plywood – Dark Premium Finish
HPL phenolic plywood is the most resistant and easiest-to-maintain option, recommended for intensive use and customers seeking a darker, professional camper finish.
✅ Very dark brown or almost black appearance.
✅ 15 mm thickness.
✅ High resistance to humidity, impacts and everyday wear.
✅ Smooth HPL surface that is easy to clean.
✅ Greater resistance to scratches and surface marks.
✅ Premium appearance suitable for frequent travel or rental use.
⚠️ Please note: HPL phenolic plywood is the heaviest of the three options, although it remains suitable for removable camper furniture.
👉 View current Citroën Jumpy camper kit materials, finishes and prices:
Camper Furniture Kit Materials – Differences, Properties & Durability
Features of the Citroën Jumpy Camper Furniture Kit
Rear Kitchen, Multi-Height Table, Modular Storage and Coolzone 35L Fridge Compatibility
The Citroën Jumpy Camper Furniture Kit combines a rear kitchen, adjustable table and multiple storage compartments within a compact, removable furniture system.
The exact layout is adapted to the Jumpy generation, body length, cargo or passenger interior, seating arrangement and accessories selected.
🔥 Pull-Out Rear Kitchen Drawer for a Campingaz-Style Stove
The rear kitchen includes a custom pull-out drawer prepared for a compatible Campingaz-style stove.
Depending on the selected configuration, the drawer can accommodate a single-burner or larger stove while providing an accessible cooking surface at the rear of the van.
Behind the kitchen drawer, an independent top-opening storage trunk provides space for cookware, food or other camping equipment.
The stove must always be used according to the manufacturer's ventilation and safety instructions.
🍽️ Multi-Height Indoor and Outdoor Camper Table
A multi-height table is positioned at the centre of the Citroën Jumpy Camper Box.
The table can be used:
✅ Inside the van in dining mode.
✅ At a lower height in lounge mode.
✅ Outside the vehicle when camping.
The table, its leg and the corresponding supports can be stored securely inside the camper furniture when not in use, helping keep the rear area organised and reducing movement while travelling.
The different positions and operating system can be seen in the demonstration video on this page.
🧳 Modular Storage Compartments for Camping Equipment
Behind the central table, another top-access trunk provides additional storage. Depending on the selected layout, the left-hand section can include two further compartments with top and front access.
These storage areas can be configured for:
✅ A compatible 35L compressor fridge.
✅ A 12V outdoor shower system and water container.
✅ Food, cookware and camping equipment.
✅ Clothing, bedding or a portable toilet.
✅ Table legs and folding bed supports.
The standard rear layout can provide two top-opening trunks and three front-access compartments.
Optional side modules positioned over compatible wheel-arch areas can add two further top-opening storage spaces while helping extend the sleeping surface.
The exact number, position and dimensions of the compartments can vary according to the Citroën Jumpy generation, body length, interior trim and selected furniture configuration.
❄️ Coolzone 35L Compressor Fridge for the Citroën Jumpy Camper Kit
The Coolzone 35L compressor fridge is our recommended refrigeration option for compatible Citroën Jumpy camper furniture layouts.
Depending on your preferred configuration, the fridge can be:
✅ Stored inside a dedicated top-opening trunk.
✅ Positioned in a front-access compartment.
✅ Installed on an optional slide-out fridge support.
A sliding installation can alter the furniture layout or height required for ventilation and accessibility. Its exact position and dimensions are therefore confirmed before manufacturing.
The Coolzone 35L offers a practical balance of capacity, cooling performance and energy efficiency for medium-sized camper vans. Compatibility is checked according to the exact furniture configuration and selected accessories.
👉 View the Coolzone 35L compressor fridge:
Citroën Jumpy Camper Box – 35L Slide-Out Fridge Drawer Example
Citroën Jumpy Camper Box Storage and Modular Layout
Dual-Access Trunk, Wheel-Arch Side Modules, Reinforced Drawers and Custom Mattress Pack
The Citroën Jumpy Camper Box is designed to maximise storage without compromising the folding bed, indoor table or everyday use of the van.
Its modular layout can be adapted to the Jumpy generation, body length, wheel-arch design, rear seats, interior trim and accessories selected.
🧳 Left-Side Dual-Access Storage Trunk
We recommend configuring the left-side storage trunk with both top and front access. Based on our experience, this provides one of the most practical layouts for frequently used camping equipment.
Depending on the configuration, this compartment can accommodate:
✅ A 20L water container for a 12V outdoor shower.
✅ A portable toilet.
✅ Electrical equipment or camping accessories.
✅ Food, clothing or other travel essentials.
Our preferred arrangement is to store the portable toilet inside the table compartment while travelling. When the furniture is unfolded in dining or lounge mode, it can be moved temporarily to the front cabin area.
This keeps the left-side storage trunk available for the water container, shower equipment or other camping gear.
🛏️ Wheel-Arch Side Modules and Wider Sleeping Surface
Compatible Citroën Jumpy camper furniture kit configurations can include two side modules positioned over the wheel-arch areas.
These modules help extend the sleeping platform towards the vehicle walls while creating additional hidden storage.
Each side module includes a top-opening lid, providing useful space for:
✅ Bedding and pillows.
✅ Clean clothing.
✅ Used clothing or laundry.
✅ Small camping accessories.
The exact shape and dimensions of the side modules depend on the Jumpy generation, interior trim, wheel-arch covers and rear air-conditioning equipment.
🧰 Reinforced Double-Drawer Configuration
A double-drawer layout can be manufactured on request for compatible Citroën Jumpy camper configurations.
Although visually attractive, we do not normally recommend this option because the additional drawer panels and runners reduce the usable internal storage space.
Full-extension drawers also add weight and place greater leverage on the sliding mechanisms. For this reason, the single-drawer configuration is generally more practical and space-efficient.
When the double-drawer option is selected, reinforced full-extension slides rated for approximately 30–40 kg are used. Availability and the final configuration are confirmed before manufacturing.
🛡️ Durable Furniture with Coordinated Interior Finishes
The removable Citroën Jumpy camper kit is designed to combine structural strength, practical storage and visual harmony with the vehicle interior.
Poplar, natural phenolic and dark HPL phenolic finishes coordinate with the New Design dark grey mattress pack, creating a clean and consistent camper setup.
With correct installation, securing, cleaning and maintenance, the furniture is designed to provide a long service life during everyday use and extended camper journeys.
📐 Citroën Jumpy Camper Box Dimensions
The furniture and bed dimensions vary according to the generation, body length, seating configuration and interior equipment.
Typical measurements are:
✅ Central furniture width: approximately 115–120 cm.
✅ Optional side modules: approximately 14 cm per side.
✅ Typical sleeping width with side modules: approximately 143–148 cm.
✅ Main furniture depth: approximately 120 cm.
✅ Folding bed length: approximately 185–190 cm.
All measurements are approximate. Wider or narrower configurations may be required depending on the wheel arches, plastic trim, rear air-conditioning units and selected furniture layout.
The final dimensions are confirmed before manufacturing from the exact vehicle information and photographs of the rear interior.
💤 Custom New Design Mattress Pack Included
Every Citroën Jumpy furniture finish includes a made-to-measure New Design dark grey mattress pack.
The mattress is divided into modular sections corresponding to the different parts of the camper furniture. This makes it possible to switch between:
✅ Full bed mode.
✅ Dining configuration.
✅ Lounge or relaxation mode.
✅ Compact folded storage for travelling.
The modular sections also allow individual storage trunks to be opened without dismantling the entire sleeping surface.
Each mattress piece is shaped to fit closely within the selected configuration, helping minimise gaps and movement between sections. The result is a flat, supportive sleeping surface suitable for weekend trips and longer camper journeys.
🔧 Compatibility with Rear Air Conditioning and Interior Trim
Plastic wheel-arch covers, rear air-conditioning units and passenger trim can reduce the available interior width.
Where necessary, removable side extensions are used to adapt the sleeping platform while preserving access to the storage compartments and keeping the furniture easy to install or remove.
👉 Discover our made-to-measure modular camper mattress packs:
Citroën Jumpy Camper Kit Structure, Load Distribution and Height Options
Stable Two-Part Folding System with Integrated Storage for Table and Bed Supports
The Citroën Jumpy camper furniture kit uses a compact two-part structure designed to distribute its support across the main rear module, compatible folded seats or dedicated folding legs.
The structure and furniture height are adapted to the Jumpy generation, body length, seating arrangement, wheel arches and interior equipment.
🧰 Integrated Storage for Table and Bed Supports
Each camper module includes a dedicated compartment for storing the table leg and folding bed supports when they are not in use.
These components remain secured inside the furniture, helping reduce unwanted movement and rattling while travelling.
In compatible configurations, the complete folded structure and New Design mattress pack can be stored within the rear load area, keeping the interior clean, organised and ready for everyday vehicle use.
🛏️ Two-Part Folding Bed and Support Structure
The folding bed distributes its support between two principal sections:
✅ Main camper module: the largest and strongest section, positioned inside the rear load area and forming the base of the furniture system.
✅ Fold-out bed extension: the front section that rests on compatible folded seats or on a dedicated folding-leg system when the rear seats are removed.
This design spreads the load across the intended support points and helps avoid concentrating pressure on a single area of the vehicle interior.
When the bed extension rests on folded seats, the contact surfaces and furniture height are adapted to the selected layout. When no rear seats are installed, the folding supports transfer the load through the camper structure and the designated floor contact points.
📏 Camper Box Height with Rear Seats Installed
For compatible passenger or Combi configurations retaining folded rear seats, the furniture is normally manufactured at approximately 55 cm high.
This height aligns the bed platform with the level of the folded seats and can allow 5 or 6 seats to remain available when the Citroën Jumpy Camper Box is folded and stored.
The exact number of usable seats depends on the Jumpy generation, body length, original seating arrangement and selected furniture configuration.
🔧 Lower Camper Furniture Without Rear Seats
When the rear seats are removed, the Citroën Jumpy removable camper kit can normally be manufactured at approximately 40–44 cm high.
The lower configuration provides:
✅ More usable space above the sleeping platform.
✅ A lower bed and easier interior access.
✅ Storage adapted to the customer's camping equipment.
✅ Support through the main module and folding-leg system.
✅ A compact setup for cargo or dedicated camper use.
The final height is confirmed according to the wheel arches, interior trim, rear air-conditioning equipment and preferred storage capacity.
🛡️ Secure Installation and Protection of Vehicle Contact Areas
The furniture must always be correctly fastened using suitable anchoring points whenever the vehicle is moving.
Each configuration is adapted to the available securing points, seat layout and interior dimensions. Correct installation and load distribution help keep the camper furniture stable during normal use while protecting the seats and vehicle contact areas from unnecessary movement or concentrated pressure.
The result is a compact, reversible Citroën Jumpy camper conversion kit suitable for family travel, everyday transport, work use and camper adventures without permanent structural modifications.
👉 View the Citroën Jumpy Camper Furniture Kit with New Design mattress pack included:
Peugeot Jumpy Camper Box – Removable Camper Kit to Keep the 3rd Row of Seats Installed – L2 Van Camper Conversion
Available Configurations and Accessories for the Citroën Jumpy Camper Kit
Customize Your Camper Conversion with Cooking, Water, Refrigeration, Power, Privacy and Heating
The Citroën Jumpy Camper Kit can be configured with compatible accessories and modular upgrades designed to match your travel style, comfort requirements and desired level of autonomy.
Several of these accessories and furniture configurations can be seen in the demonstration video at the top of this page.
Exact compatibility is confirmed according to the Jumpy generation, body length, interior trim, seating arrangement, available space and selected camper furniture layout.
🚿 Foldable Camper Sink and 12V Outdoor Shower with 20L Water Tank
Combine the compact foldable sink with a portable 12V outdoor shower and 20-litre water container.
This practical system can be used for washing dishes, cleaning camping equipment or showering outdoors while remaining easy to store inside the Citroën Jumpy Camper Box.
👉 View the Foldable Camper Sink:
👉 View the 12V Outdoor Shower with 20L Water Tank:
https://www.kitmueblecamper.com/p/12v-outdoor-camper-shower-20l-portable-water-tank/
🔥 Custom Campingaz Stove and Pull-Out Kitchen Drawer
The rear kitchen drawer is manufactured to accommodate a compatible Campingaz-style stove, creating an accessible cooking area at the rear of the van.
The drawer dimensions are adapted to the selected stove and Citroën Jumpy camper furniture kit configuration.
Always use the stove according to the manufacturer's safety, ventilation and operating instructions.
👉 View the Compatible Campingaz Stove:
https://www.kitmueblecamper.com/p/custom-campingaz-1-burner-stove-for-our-camper-furniture/
↔️ Slide-Out Fridge Drawer with Folding Support Brackets
The optional fridge drawer keeps a compatible compressor fridge secured and accessible.
Its sliding mechanism and folding support brackets make it easier to reach the fridge while preserving the modular character of the camper furniture.
The drawer is manufactured as part of the custom Jumpy furniture configuration. Its dimensions, position, ventilation and resulting furniture height must be confirmed when ordering the kit.
👉 Configure the Fridge Drawer with Your Citroën Jumpy Camper Kit:
❄️ Coolzone 35L Compressor Fridge
The Coolzone 35L compressor fridge is our recommended refrigeration option for compatible Citroën Jumpy layouts.
It includes an efficient LG compressor, Bluetooth control and compatibility with 12V/24V DC and 100–240V AC power supplies.
Depending on the furniture configuration, it can be stored inside a dedicated compartment or installed on the optional slide-out fridge drawer.
👉 View the Coolzone 35L Compressor Fridge:
🌙 Nine-Layer Thermal Blackout Covers for Citroën Jumpy
Made-to-measure thermal blackout covers provide privacy and help protect the interior from sunlight, heat, cold and condensation.
The nine-layer Isoflex construction and screw-type suction cups provide secure attachment to the windows.
Before manufacturing, the Jumpy generation, body length, rear-door configuration and number of windows must be confirmed through photographs.
👉 View the Nine-Layer Thermal Blackout Covers:
https://www.kitmueblecamper.com/p/blackout-shades-thermal-insulation-for-camper-vans1/
🧩 Modular 2+1 Camper Furniture Configuration
The 2+1 configuration provides additional flexibility between sleeping space, storage and everyday vehicle use.
Its removable sections allow the furniture layout to be adapted to different journeys, passenger requirements and cargo needs.
The exact arrangement and compatible seats depend on the Jumpy generation and body length.
👉 View the 2+1 Camper Furniture Configuration:
https://www.kitmueblecamper.com/p/en-modalidad-2-1/
🔋 Auxiliary Battery System with Optional Inverter
An auxiliary battery system can power the compressor fridge, lighting, 12V shower, USB devices and other compatible accessories without discharging the vehicle's starter battery.
Depending on the selected installation, it can be integrated inside the camper furniture or installed in a separate protective box. Configurations are available with 12V outputs or with an inverter and compatible 230V outlets.
👉 View the Camper Auxiliary Battery System:
https://www.kitmueblecamper.com/p/camper-auxiliary-battery-power-supply-for-camper-vans/
🚰 Independent California-Style Sink and Kitchen Unit
The independent sink and kitchen module creates an additional water, cooking and storage area inspired by California-style camper layouts.
Depending on the vehicle and furniture configuration, it can be positioned behind the driver's seat or in the rear area.
The module can include a sink, clean and waste water tanks, drainage system, 12V pump, drawers and storage for cookware.
👉 View the Independent Camper Sink and Kitchen Unit:
https://www.kitmueblecamper.com/p/camper-sink-kitchen-unit-compatible-with-camper-furniture-kits/
♨️ Autoterm 2 kW Stationary Heater
A compatible 2 kW stationary diesel heater can provide greater comfort during winter travel and overnight stays in cold conditions.
The final installation depends on the Citroën Jumpy generation, available underbody space, fuel system, electrical configuration and camper furniture layout.
The installation must provide suitable combustion-air intake, exhaust routing, fuel supply, electrical protection and a compatible controller or display. Applicable homologation and technical-inspection requirements must be confirmed before installation.
👉 View the 2 kW and 4 kW Stationary Heater Options:
https://www.kitmueblecamper.com/p/en-calefaccion-estacionaria/
🛒 How to Order the Citroën Jumpy Kit with Accessories
You can add the available accessories to your online order or contact us directly by WhatsApp.
Send us the model year, generation, body length, seating configuration and photographs of the rear interior. We will help you prepare a compatible package with the camper furniture and accessories required.
👉 Buy the Citroën Jumpy Camper Furniture Kit:
📩 WhatsApp:
Installing the Citroën Jumpy Camper Furniture Kit
Quick Self-Installation, Secure Attachment and Reversible Everyday Use
The Citroën Jumpy Camper Furniture Kit is designed for quick installation and removal without drilling or making permanent structural modifications to the vehicle.
This removable system allows you to alternate between everyday use—for work, family or passenger transport—and a complete camper setup whenever required.
🔧 Quick Installation Without Permanent Vehicle Modifications
The camper furniture can be installed or removed in a few minutes.
Its modular, self-install design makes it possible to camperize your Citroën Jumpy without permanently altering the bodywork, floor or interior trim.
Before manufacturing, we adapt the structure and support system to the exact vehicle generation, body length, interior configuration and available anchoring points.
🛡️ Secure Attachment and Stable Support While Travelling
The removable Citroën Jumpy camper kit must always be securely fastened using suitable anchoring points whenever the vehicle is moving.
The furniture includes dedicated storage spaces for the table leg and folding bed supports. These components remain neatly stored when the bed is folded, helping prevent unwanted movement and noise inside the rear area.
The exact securing method is confirmed according to the Jumpy version and its available original anchoring points.
🚐 Discreet Everyday Use with the Camper Box Folded
While travelling, the Citroën Jumpy Camper Box remains folded inside the rear load area.
In compatible configurations, the made-to-measure New Design mattress pack can travel stored within the same rear setup.
This keeps the interior organised and makes it possible to unfold the bed, table and storage system quickly after arriving at your destination.
Rear visibility and the use of any original luggage cover depend on the Jumpy generation, interior trim and furniture configuration.
📏 Camper Kit Height with or Without Rear Seats
The camper furniture height and folding support system can be adapted to the seating configuration:
✅ With compatible folded rear seats: the folding bed extension rests securely on the folded seats or adapted supports. The furniture is normally manufactured at approximately 55 cm high.
✅ Without rear seats: the camper box can normally be manufactured at approximately 40–44 cm high, creating more usable space and a lower sleeping platform.
✅ With passenger seats retained: the number of usable seats depends on the generation, body length, original seat layout and selected camper furniture configuration.
All measurements are approximate and are confirmed before manufacturing.
📋 Citroën Jumpy Compatibility Check
To manufacture a properly adapted camper furniture kit, we confirm:
✅ Model year and generation: Citroën Jumpy I, II or III.
✅ Body length: XS, M or XL, or the equivalent L1/L2 designation.
✅ Cargo, Combi or passenger interior.
✅ Number, position and folding system of the seats to be retained.
✅ Visible wheel arches and plastic wheel-arch covers.
✅ Rear air-conditioning units and other interior equipment.
✅ Available original anchoring points.
✅ Preferred camper box height.
✅ Fridge position and selected accessories.
📩 Send us the vehicle information and photographs for a personalised compatibility check:
Frequently Asked Questions About the Citroën Jumpy Camper Kit
Which Citroën Jumpy generations and body lengths are compatible with the camper kit?
The camper furniture can be adapted to compatible Citroën Jumpy first-generation models from 1994–2006, second-generation models from 2007–2016 and third-generation models from 2016 onwards. Body-length designations vary by generation, while current versions include XS, M and XL. Exact compatibility is confirmed from the model year, body length, interior trim, wheel arches, seats and available anchoring points.
Does the Citroën Jumpy camper furniture kit require homologation?
When used as a removable system without permanent structural modifications, the camper furniture is normally treated as securely fastened cargo rather than a fixed conversion. It must always be properly secured while travelling. Requirements can vary by country, vehicle, inspection station and installed accessories, so the applicable local regulations should be checked.
Can I retain the original seats with the Citroën Jumpy camper kit installed?
Compatible configurations can retain 2, 3, 5 or 6 usable seats, depending on the Citroën Jumpy generation, body length, original seating arrangement and selected camper furniture layout. Long-body versions can provide more space for retaining additional seats. The exact seating configuration is confirmed before manufacturing.
What are the bed dimensions of the Citroën Jumpy camper conversion kit?
The folding bed is approximately 185–190 cm long. The central furniture is generally around 115–120 cm wide, while compatible side modules or removable extensions can increase the sleeping width. Final dimensions depend on the vehicle generation, wheel-arch trim, rear air-conditioning equipment, seats and selected layout.
What is included with the Citroën Jumpy camper furniture kit?
The kit includes a removable folding bed structure, a made-to-measure New Design dark grey mattress pack, a rear kitchen drawer prepared for a compatible Campingaz-style stove, a multi-height indoor and outdoor table, modular storage compartments and the required folding supports. Exact equipment depends on the selected configuration.
Which materials, fridge and accessories are available for the Citroën Jumpy camper box?
The furniture is available in 15 mm poplar plywood, natural phenolic plywood or dark HPL phenolic plywood. The Coolzone 35L compressor fridge is recommended for compatible layouts and can be stored in a dedicated compartment or installed on an optional sliding support. Other compatible accessories can include a foldable sink, 12V outdoor shower, thermal blackout covers, auxiliary battery system and independent kitchen unit.
Customer Reviews of Kit Muebles Camper
Rated 4.9 Out of 5 Based on 51 Customer Reviews
Customers can view genuine reviews, photographs and completed camper furniture projects through our different locations and service areas.
⭐ Overall customer rating: 4.9/5 from 51 reviews
🇪🇸 Madrid – Arganda del Rey
https://maps.app.goo.gl/YR3S8WCe1pqdb1Xb7
🇪🇸 Barcelona – Tordera
https://maps.app.goo.gl/bHjBo51GtmkenoCa7
🇪🇸 Seville – Écija
https://maps.app.goo.gl/13MZuMieqKebSP9w6
🇫🇷 France – Narbonne / Argeliers area
https://maps.app.goo.gl/6HwG9uanwFepyD6cA
Order Your Citroën Jumpy Camper Furniture Kit
Custom Removable Camper Box with Folding Bed and New Design Mattress Pack Included
Transform your Citroën Jumpy into a practical camper with a custom-made, removable furniture kit designed for travel and everyday vehicle use.
Choose your preferred material, body length, seating configuration, camper box height and compatible accessories.
Before manufacturing, we personally confirm the vehicle details to prepare the most suitable Citroën Jumpy camper conversion kit for your van.
✅ Folding bed approximately 185–190 cm long.
✅ New Design dark grey mattress pack included.
✅ Rear kitchen and multi-height table.
✅ Modular storage adapted to the vehicle.
✅ Configurations with or without rear seats.
✅ Optional fridge, water, privacy, electrical and heating accessories.
👉 Buy the Citroën Jumpy Camper Furniture Kit:
📩 Request a Personalised Compatibility Check by WhatsApp:
Thanks Be to God
Every Project, Journey and Opportunity Begins with Him
Thank you for trusting Kit Muebles Camper.
Above all, thanks be to God for every project, every journey and every opportunity to serve.
"I can do all things through Christ who strengthens me." — Philippians 4:13