Cart
0
0.00 €
Peugeot Traveller Camper Furniture Kit – Removable Camper Conversion
Removable, self-install camper furniture for compatible [MODEL/VERSIONS], with a 185–190 cm bed, New Design mattress pack, rear kitchen, multi-height table, modular storage and Coolzone 35L fridge compatibility.
Removable Peugeot Traveller Camper Kit for XS, M and XL Vans
Camper Furniture with a 185–190 cm Bed, New Design Mattress Pack, Rear Kitchen and Modular Storage
Transform your Peugeot Traveller into a practical camper van with a removable, self-install camper furniture kit designed for camping, road trips and everyday vehicle use.
The modular furniture system can be manufactured for compatible Peugeot Traveller XS, M and XL passenger configurations. Before manufacturing, we confirm the exact model year, body length, seat arrangement, rail system, wheel-arch trim, rear air-conditioning equipment and available anchoring points.
The Peugeot Traveller Camper Kit can include:
✅ A folding camper bed approximately 185–190 cm long, with a sleeping width adapted to the confirmed vehicle and side-module configuration.
✅ A made-to-measure New Design dark grey mattress pack, included with every available furniture material.
✅ A rear pull-out kitchen drawer prepared for a compatible Campingaz-style stove.
✅ A multi-height table for indoor dining and lounge modes that can also be used outside the vehicle.
✅ Modular storage compartments for food, water, clothing, kitchen equipment, camping accessories or a portable toilet.
✅ Optional side storage modules adapted to compatible wheel-arch areas, extending the sleeping surface and providing additional top-access storage.
✅ A dedicated compartment or optional sliding support for the recommended Coolzone 35L compressor fridge.
✅ A compact two-part folding structure adapted to compatible configurations with folded rear seats or dedicated folding supports.
When folded, the removable Peugeot Traveller Camper Box remains inside the rear luggage area together with the custom mattress pack, keeping the camper equipment compact and ready to unfold after arriving at your destination.
Compatible passenger layouts can retain selected original seats. The exact number of usable seats depends on the XS, M or XL body length, original seating arrangement, rail system and selected camper furniture configuration.
When used as a removable system without permanent modifications, the furniture is normally treated as securely fastened cargo rather than a fixed camper conversion. It must always be correctly attached while travelling, and the applicable registration or technical-inspection requirements should be checked according to the country, vehicle and accessories installed.
👉 Buy the Peugeot Traveller camper furniture kit with New Design mattress pack included:
Removable camper kit for Peugeot Traveller with rear Campingaz kitchen drawer and multi-height table
Peugeot Traveller Camper Box – Removable Camper Kit with Mattress Pack Included
Peugeot Traveller Camper Box – Removable Camper Kit with Mattress Pack – Special Offer 750€
Peugeot Traveller Camper Box – Modular Removable Camper Kit
Custom Camper Furniture for Compatible Peugeot Traveller XS, M and XL Passenger Vans
The Peugeot Traveller Camper Box is a custom-made, removable furniture system designed to transform your passenger van into a practical camper without drilling or making permanent modifications.
Introduced in 2016, the Peugeot Traveller was originally offered in three body lengths:
🚐 Compact or XS: approximately 4.60 m long.
🚐 Standard or M: approximately 4.95 m long.
🚐 Long or XL: approximately 5.30 m long.
Although the compact XS version is no longer included in the current Peugeot Traveller range, we can still manufacture a compatible camper furniture kit for existing XS vehicles.
Before manufacturing, we confirm the model year, body length, seat arrangement, rail system, wheel-arch trim, rear air-conditioning equipment and available anchoring points.
Retain Compatible Passenger Seats and Everyday Vehicle Use
Depending on the vehicle length and original seating arrangement, the modular camper furniture can be adapted to compatible layouts retaining 2, 3, 5 or 6 usable seats.
Longer M and XL configurations can provide more luggage space behind the rear seats, making it possible to retain additional seats in selected layouts. However, the exact number of operational seats must be confirmed individually because the seat rails, interior equipment and available boot depth can vary.
⚠️ We do not recommend stating that every L2 or XL vehicle can retain all its original seats. Compatibility depends on the specific Traveller and camper box configuration.
Quick, Removable and Reversible Camper Conversion
The removable Peugeot Traveller camper kit can be installed or removed quickly, allowing the vehicle to alternate between family transport, everyday use and camper mode.
When folded, the rear camper module and made-to-measure New Design dark grey mattress pack remain compactly stored inside the luggage area.
In compatible configurations, the original parcel shelf may remain usable, helping preserve rear visibility and keeping the camper equipment discreetly stored when viewed from outside.
Removable Camper Furniture and Technical Inspections
When used without permanent vehicle modifications, the camper furniture is normally treated as securely fastened cargo rather than a fixed camper conversion.
The kit must always be correctly attached using suitable securing points whenever the vehicle is moving. Applicable registration, homologation and technical-inspection requirements can vary according to the country, vehicle classification and accessories installed.
Permanent electrical, gas, heating or structural installations may be subject to separate requirements.
This removable and reversible design makes the Peugeot Traveller Camper Furniture Kit suitable for camping, family trips, passenger transport and everyday vehicle use.
Camper Box Materials for Peugeot Traveller
Choose 15 mm Poplar, Natural Phenolic or HPL Phenolic Plywood with New Design Mattress Pack Included
The Peugeot Traveller camper furniture kit can be manufactured in three 15 mm plywood finishes, each providing a different balance of weight, appearance, impact resistance and ease of maintenance.
Every furniture material includes the made-to-measure New Design dark grey mattress pack.
💶 Current Peugeot Traveller camper kit configurations start from €875, excluding shipping.
The final price depends on the selected material, XS/M/XL body length, seating configuration, side modules, fridge position and accessories. Current prices and available variants can be checked directly in our online store.
🔹 Poplar Plywood – Lightweight Natural Finish
Poplar plywood is the lightest available option and is recommended for customers who want a camper box that is easier to install and remove.
Colour and properties:
✅ Very light natural colour, close to pearl white, with a subtle wood grain.
✅ 15 mm thickness.
✅ Excellent strength-to-weight ratio.
✅ Moisture-resistant treatment suitable for normal camper use.
✅ Easier to handle than the phenolic alternatives.
✅ Particularly practical for larger removable furniture modules.
⚠️ Please note: Poplar is softer than phenolic plywood and can develop small pressure marks if keys, tools or other sharp objects are pressed against its surface.
🔹 Natural Phenolic Plywood – Warm Rustic Finish
Natural phenolic plywood combines a visible wood grain with increased density and impact resistance, creating a warmer, cabin-style camper interior.
Colour and properties:
✅ Medium natural wood tone with visible grain.
✅ 15 mm thickness.
✅ Denser and more impact-resistant than poplar plywood.
✅ Phenolic bonding provides high resistance to moisture and humid environments.
✅ Durable construction suitable for frequent camper use.
✅ Natural appearance that coordinates with the New Design dark grey mattress pack.
⚠️ Please note: The natural surface is more porous than an HPL finish. Spilt water should be removed, and exposed surfaces and edges must be cleaned and maintained appropriately.
🔹 HPL Phenolic Plywood – Dark Premium Finish
HPL phenolic plywood is the most resistant and easy-to-maintain option, recommended for intensive camper use and customers looking for a darker, professional finish.
Colour and properties:
✅ Very dark brown or almost black finish.
✅ 15 mm thickness.
✅ High resistance to humidity, impacts and everyday wear.
✅ Smooth HPL surface that is easy to clean.
✅ Greater resistance to scratches, stains and pressure marks.
✅ Premium appearance suitable for frequent travel or professional camper use.
⚠️ Please note: HPL phenolic plywood is heavier than poplar plywood. The edges and joints should still be protected from prolonged water exposure and maintained correctly.
👉 View current Peugeot Traveller camper kit materials, configurations and prices:
Camper Furniture Kit Materials – Differences, Properties & Durability
Features of the Peugeot Traveller Camper Furniture Kit
Modular Camper Box with Rear Kitchen, Multi-Height Table and Smart Storage
The Peugeot Traveller camper furniture kit combines a rear kitchen, adjustable table and multiple storage compartments within a compact, removable furniture system.
This modular Peugeot Traveller Camper Box is designed to maximize the available luggage space while keeping the folding bed, kitchen equipment and camping accessories organized.
The exact layout is adapted to the XS, M or XL body length, original seat arrangement, interior trim, rear air-conditioning equipment and accessories selected.
🍳 Pull-Out Rear Kitchen Drawer for a Campingaz-Style Stove
The rear kitchen includes a custom pull-out drawer prepared for a compatible Campingaz-style stove.
Depending on the selected configuration, the drawer can accommodate a single-burner or larger stove while providing a practical cooking surface at the rear of the vehicle.
Behind the kitchen drawer, an independent top-opening storage trunk provides space for:
✅ Cookware and kitchen utensils.
✅ Food and camping supplies.
✅ Gas cartridges and compatible stove accessories.
✅ Cleaning equipment or other travel essentials.
Always use the stove according to the manufacturer's safety and ventilation instructions.
🪑 Multi-Height Indoor and Outdoor Camper Table
A multi-height table is positioned at the centre of the Peugeot Traveller camper conversion kit.
The table can be configured inside the vehicle for:
✅ Dining mode, creating a practical eating or working area.
✅ Lounge mode, providing a lower and more relaxed seating position.
✅ Outdoor mode, allowing the tabletop to be removed and used outside the van.
The demonstration video on this page shows how the table changes position and integrates with the folding camper furniture.
When not in use, the table leg can be stored inside its dedicated furniture compartment, helping keep the luggage area organized while travelling.
📦 Modular Storage Compartments for Camping Equipment
Behind the central table, another top-access trunk provides additional storage.
Depending on the selected layout, the left-hand furniture section can include two further compartments with top or front access.
These storage areas can be configured for:
✅ A compatible 35L compressor fridge.
✅ A 12V outdoor shower system with water container.
✅ Food, cookware and kitchen equipment.
✅ Clothing, bedding and camping accessories.
✅ A portable toilet or electrical equipment.
The standard rear configuration can provide two top-access trunks and three front-access compartments.
Optional side modules positioned over compatible wheel-arch areas can add two further top-opening storage spaces while extending the sleeping platform toward the sides of the vehicle.
Together, these compartments create a practical removable camper kit for Peugeot Traveller, suitable for travelling, dining, sleeping and everyday vehicle use.
The exact number, shape and dimensions of the storage compartments are confirmed before manufacturing.
❄️ Coolzone 35L Compressor Fridge for Peugeot Traveller
The Coolzone 35L compressor fridge is our recommended refrigeration option for compatible Peugeot Traveller camper furniture layouts.
Depending on the preferred configuration, the fridge can be:
✅ Stored inside a dedicated rear top-opening trunk.
✅ Installed at the front of the furniture on an optional slide-out fridge drawer.
The front sliding-drawer configuration may require an additional furniture-height adjustment of approximately 25 mm to provide suitable clearance, drawer movement and ventilation.
This adjustment is confirmed before manufacturing because the final position depends on the Traveller body length, seats, interior trim and selected camper box height.
The Coolzone 35L includes:
✅ 35-litre capacity with two internal compartments.
✅ High-efficiency LG compressor.
✅ Bluetooth app control and integrated digital display.
✅ 12V/24V DC operation.
✅ 100–240V AC operation with an external transformer.
✅ Adjustable temperature range from approximately −20°C to +20°C.
✅ Three-stage vehicle battery protection.
Its dimensions must always be checked against the final furniture configuration, especially when selecting the optional sliding drawer.
👉 Equip your Peugeot Traveller Camper with the Coolzone 35L Compressor Fridge:
Fiat Talento Camper Box – 35L Slide-Out Fridge Drawer Example
Peugeot Traveller Camper Storage and Modular Layout
Dual-Access Storage, Wheel-Arch Side Modules and Custom New Design Mattress Pack
The Peugeot Traveller camper furniture kit is designed to maximize storage without compromising the folding bed, indoor table or everyday use of the vehicle.
Its modular layout can be adapted to the Traveller XS, M or XL body length, original seat arrangement, interior trim, wheel arches, rear air-conditioning equipment and accessories selected.
💧 Left-Side Storage Trunk with Dual Access
We recommend configuring the left-side storage trunk with both top and front access.
This dual-opening design provides convenient access when the Peugeot Traveller Camper Box is folded, in table mode or completely converted into a bed.
Depending on the selected configuration, the compartment can accommodate:
✅ A water container for a 12V outdoor shower.
✅ A portable toilet.
✅ Electrical accessories or camping equipment.
✅ Food, clothing or other travel essentials.
Our preferred arrangement is to store the portable toilet inside the table compartment while travelling.
When the camper furniture is unfolded in dining or lounge mode, the toilet can be moved temporarily to the front cabin area. This keeps the left-side trunk available for the shower tank, water storage or frequently used camping equipment.
🛏️ Wheel-Arch Side Modules and Wider Sleeping Surface
Compatible Peugeot Traveller configurations can include side storage modules adapted to the wheel-arch areas.
These modules extend the sleeping platform toward the sides of the vehicle while providing additional hidden storage.
Each side module includes a top-opening lid, making it suitable for:
✅ Clean bedding and pillows.
✅ Used clothing or laundry.
✅ Shoes and small travel bags.
✅ Curtains, blackout covers or camping accessories.
A practical arrangement is to store clean bedding on one side and used clothing on the other, keeping the interior organized during longer trips.
The exact shape and width of the side modules depend on the wheel-arch covers, rear trim and air-conditioning equipment.
🗄️ Reinforced Double-Drawer Configuration
The Peugeot Traveller camper conversion kit can be manufactured with a double-drawer layout on request for compatible configurations.
Although this option can look attractive, we generally recommend the more practical single-drawer design.
A double-drawer layout:
⚠️ Reduces the usable internal storage volume.
⚠️ Adds extra wooden panels, runners and weight.
⚠️ Reduces the available drawer depth.
⚠️ Places greater leverage on the full-extension sliding mechanisms.
When the double-drawer configuration is selected, reinforced full-extension slides rated for approximately 30–40 kg are used.
Availability and final dimensions are confirmed before manufacturing.
🪵 Coordinated Design, Strength and Durability
The removable furniture is designed to combine structural strength, practical storage and visual harmony with the Peugeot Traveller interior.
Poplar, natural phenolic and dark HPL phenolic finishes coordinate with the New Design dark grey mattress pack, creating a clean and consistent appearance throughout the camper setup.
With correct installation, securing, cleaning and maintenance, the furniture is designed to provide a long service life during everyday use, weekend trips and extended camper journeys.
📐 Peugeot Traveller Camper Box Dimensions
The dimensions of the removable camper kit for Peugeot Traveller vary according to the body length, seats, interior trim and selected side modules.
Typical measurements are:
✅ Central furniture width: approximately 115–120 cm.
✅ Side modules: approximately 14 cm per side, adding around 28 cm in total.
✅ Furniture depth: approximately 120 cm.
✅ Folding bed length: approximately 185–190 cm.
✅ Furniture height without rear seats: normally approximately 40–44 cm.
✅ Furniture height for compatible folded-seat layouts: normally approximately 55 cm.
All measurements are approximate and must be confirmed for the individual vehicle before manufacturing.
The demonstration videos on this page show examples of different Peugeot Traveller seating and furniture configurations.
🔧 Compatibility with Rear Air Conditioning and Wheel-Arch Trim
Rear air-conditioning units, plastic wheel-arch covers and passenger-compartment trim can reduce the available furniture or sleeping width.
Where necessary, the design can incorporate removable side extensions adapted to the confirmed interior.
These extensions help align the sleeping surface while preserving access to the storage compartments and maintaining the removable character of the camper system.
💤 Custom New Design Mattress Pack Included
Every Peugeot Traveller camper furniture material includes a made-to-measure New Design dark grey mattress pack.
The mattress system is divided into modular sections corresponding to the different areas of the furniture. This allows the setup to change between:
✅ Full bed mode.
✅ Dining mode.
✅ Lounge mode.
✅ Hammock or relaxation mode.
Each storage compartment has a corresponding mattress section above it. This means individual trunks can be opened without dismantling the complete sleeping surface.
The mattresses are manufactured using approximately 8 cm of high-density foam, providing a practical balance between comfort, firmness, durability and compact storage.
Each section is shaped to fit the confirmed furniture and sleeping area closely, helping reduce movement and gaps between the pieces.
👉 Discover our made-to-measure modular camper mattress packs:
Structure, Load Distribution and Height Options for the Peugeot Traveller Camper Kit
Integrated Support Storage, Two-Part Folding Bed and Stable Configurations with or Without Rear Seats
The Peugeot Traveller camper furniture kit uses a compact two-part structure designed to distribute the sleeping platform across the rear furniture module, compatible folded seats or dedicated folding supports.
The exact structure, furniture height and support points are adapted to the Traveller XS, M or XL body length, original seating arrangement and selected camper box configuration.
🔩 Integrated Storage for Table Leg and Bed Supports
Each camper module includes a dedicated compartment for storing the table leg and folding bed supports when they are not in use.
This integrated storage helps:
✅ Keep all the structural components together.
✅ Reduce movement and unwanted noise while travelling.
✅ Prevent the supports from occupying other storage compartments.
✅ Keep the rear luggage area clean and organized.
The table leg, bed supports, folded furniture and New Design dark grey mattress pack remain compactly stored within the rear setup in compatible configurations.
🛏️ Two-Part Folding Bed and Support Structure
The folding bed distributes its support between two principal sections:
1️⃣ Main Peugeot Traveller Camper Box: the strongest and largest section, positioned inside the rear luggage area.
2️⃣ Fold-out bed extension: the front section that extends toward the passenger area and rests on compatible folded seats or on a dedicated folding-leg system.
This structure creates a stable sleeping platform while avoiding excessive pressure on a single point of the vehicle interior.
When the extension rests on folded seats, the furniture contact points are adapted to the confirmed seating layout.
When the rear seats are removed, folding or removable supports transfer the load through the camper structure and onto the intended support areas.
🚐 Camper Furniture Height with Rear Seats Installed
For compatible passenger layouts retaining folded rear seats, the Peugeot Traveller camper conversion kit is normally manufactured at approximately 55 cm high.
This height aligns the sleeping platform with the level of the folded seats.
Depending on the vehicle length and original seating arrangement, compatible configurations can retain 5 or 6 usable seats when the furniture is folded.
The exact number of seats that can remain installed and operational must be confirmed before manufacturing.
📦 Lower Camper Box Without Rear Seats
When the rear seats are removed, the furniture can normally be manufactured at approximately 40–44 cm high.
The lower configuration provides:
✅ More usable space above the bed.
✅ Increased headroom inside the vehicle.
✅ A lower sleeping platform.
✅ Easier access to the furniture and storage compartments.
✅ Support through the main module and dedicated folding-leg system.
The final height depends on the wheel arches, interior trim, rear air-conditioning equipment, fridge position and required storage capacity.
🛡️ Stable Support and Protection of Vehicle Contact Areas
The two-part design helps distribute the sleeping load across the intended structural support areas.
In folded-seat configurations, the contact surfaces are adapted to the seats and interior layout. This helps avoid concentrated pressure, rubbing or unnecessary movement when the bed is correctly unfolded and used.
The system is designed to protect the compatible folded seats while providing a stable sleeping platform. Correct installation, adjustment and use remain essential.
The furniture must always be securely fastened using suitable anchoring points whenever the vehicle is moving.
🔄 Compact, Removable and Reversible Design
When folded, the removable camper kit for Peugeot Traveller remains compactly stored inside the luggage area.
This allows the vehicle to alternate between:
✅ Family and passenger transport.
✅ Everyday vehicle use.
✅ Work or luggage transport.
✅ Weekend camper trips.
✅ Longer road journeys.
At the destination, the bed, table and storage system can be unfolded without drilling or making permanent structural modifications to the vehicle.
🛒 Peugeot Traveller Camper Kit Configurations
The online store includes the available Peugeot Traveller camper furniture materials, colours and seating configurations.
Every furniture finish includes the made-to-measure New Design dark grey mattress pack.
Before manufacturing, we confirm the model year, XS/M/XL body length, seat arrangement, rail system, interior trim, wheel arches, rear air conditioning, anchoring points and preferred camper box height.
👉 Buy the Peugeot Traveller Camper Furniture Kit with New Design mattress pack included:
Fiat Talento Camper Box – Removable Camper Kit to Keep the 3rd Row of Seats Installed – L2 Van Camper Conversion
Available Configurations and Accessories for the Peugeot Traveller Camper Furniture Kit
Customize Your Removable Camper Kit with Water, Cooking, Refrigeration, Privacy and Auxiliary Power
The Peugeot Traveller camper furniture kit can be complemented with modular accessories designed to improve cooking, water storage, refrigeration, privacy and electrical autonomy.
The exact compatibility and position of each accessory depend on the Traveller XS, M or XL body length, original seating arrangement, camper box height, available storage compartments and other equipment selected.
Several of these accessories and configurations can be seen in the demonstration video at the beginning of this page.
🫧 Foldable Camper Sink with Drain Plug
The compact foldable sink creates a practical washing area without requiring a conventional fixed sink.
It can be integrated into a compatible furniture surface and combined with the 12V outdoor shower. The shower head fits into the corresponding holder, allowing the system to be used for washing dishes, cleaning equipment or personal hygiene.
When folded, the sink occupies very little storage space.
👉 View the Foldable Camper Sink:
🚿 12V Outdoor Shower with 20L Water Tank
The portable shower includes a 20-litre water container and connects to a compatible 12V vehicle socket.
It can be used in:
✅ Sink mode for washing hands, dishes or camping equipment.
✅ Outdoor shower mode for showering, rinsing bicycles or cleaning equipment.
Its compact design allows it to be stored inside a suitable compartment of the Peugeot Traveller Camper Box.
👉 View the 12V Outdoor Shower with 20L Tank:
https://www.kitmueblecamper.com/p/12v-outdoor-camper-shower-20l-portable-water-tank/
🍳 Campingaz-Style Stove and Custom Kitchen Drawer
The rear kitchen drawer is prepared for a compatible Campingaz-style stove, creating an accessible cooking surface at the rear of the van.
Our online store offers a compact one-burner Campingaz stove suitable for compatible camper furniture configurations.
The drawer dimensions and stove position are confirmed according to the selected Peugeot Traveller layout.
Always follow the stove manufacturer's safety and ventilation instructions.
👉 View the Compatible Campingaz Stove:
https://www.kitmueblecamper.com/p/custom-campingaz-1-burner-stove-for-our-camper-furniture/
🧊 Slide-Out Fridge Drawer with Folding Supports
The optional slide-out fridge drawer keeps a compatible compressor fridge secured and accessible.
Its reinforced sliding system and folding supports make it easier to reach the fridge without losing the removable character of the Peugeot Traveller camper conversion kit.
The drawer is manufactured as part of the custom camper furniture. Its position, dimensions and resulting furniture height must therefore be confirmed when ordering.
👉 Configure the Fridge Drawer with Your Peugeot Traveller Camper Kit:
❄️ Coolzone 35L Compressor Fridge
The Coolzone 35L compressor fridge is our recommended refrigeration option for compatible Peugeot Traveller camper furniture configurations.
It includes an LG compressor, Bluetooth control, a digital display and 12V/24V DC or 100–240V AC operation.
Depending on the furniture layout, it can be stored inside a dedicated top-opening trunk or installed on the optional slide-out fridge drawer.
Compatibility and ventilation space must be checked against the final furniture configuration.
👉 Buy the Coolzone 35L Compressor Fridge:
🌡️ Nine-Layer Thermal Blackout Covers
Made-to-measure thermal blackout covers provide privacy and help insulate the Peugeot Traveller interior from sunlight, heat and cold.
The covers use nine-layer Isoflex insulation and screw-type suction cups.
Before manufacturing, photographs are required to confirm the Traveller body length, number of windows, side-door configuration and rear tailgate or double-door arrangement.
👉 Buy the Nine-Layer Thermal Blackout Covers:
https://www.kitmueblecamper.com/p/blackout-shades-thermal-insulation-for-camper-vans1/
🧩 Modular 2+1 Camper Furniture Configuration
The 2+1 configuration divides the furniture into removable sections, providing greater flexibility between camper use, passenger space and luggage requirements.
The compatible arrangement depends on the Peugeot Traveller body length, rail system, seats and selected camper furniture layout.
👉 View the Modular 2+1 Configuration:
https://www.kitmueblecamper.com/p/en-modalidad-2-1/
🔋 Auxiliary Battery System with Optional Inverter
An auxiliary battery system can power the compressor fridge, lighting, 12V shower, USB devices and other compatible accessories without relying exclusively on the vehicle's starter battery.
Depending on the selected configuration, the battery can be installed inside the camper furniture or in an independent protective box. It is available with or without an inverter for compatible 230V equipment.
Fixed electrical installations must be completed correctly and may be subject to technical or registration requirements according to the country and vehicle.
👉 View the Camper Auxiliary Battery System:
https://www.kitmueblecamper.com/p/camper-auxiliary-battery-power-supply-for-camper-vans/
🚰 Independent California-Style Sink and Kitchen Unit
The independent sink and kitchen module creates an additional water, cooking and storage area inspired by California-style camper layouts.
Depending on the vehicle and selected configuration, it can be positioned behind the driver's seat or in the rear area.
The module can include:
✅ Sink with clean and waste water tanks.
✅ Integrated drainage system.
✅ 12V pump that works as a tap or outdoor shower.
✅ Two drawers for cutlery and kitchen utensils.
✅ Large storage compartment for cookware.
The final dimensions and position must be adapted to the Peugeot Traveller interior.
👉 View the Independent Camper Sink and Kitchen Unit:
https://www.kitmueblecamper.com/p/camper-sink-kitchen-unit-compatible-with-camper-furniture-kits/
🛒 How to Order the Peugeot Traveller Kit with Accessories
You can add the available accessories to your online-store basket or contact us through WhatsApp to prepare a complete compatible configuration.
Before manufacturing, we confirm the Traveller model year, XS/M/XL body length, seating arrangement, interior equipment, furniture material, camper box height and accessories selected.
👉 Buy the Peugeot Traveller Camper Furniture Kit:
📩 Request a Personalized Configuration by WhatsApp:
Installing the Peugeot Traveller Camper Furniture Kit
Quick Self-Installation, Secure Attachment and Reversible Everyday Use
The removable camper kit for Peugeot Traveller is designed for quick installation and removal without drilling or making permanent structural modifications to the vehicle.
This reversible system allows you to alternate between everyday passenger use and camper mode whenever required.
🔧 Quick Installation Without Permanent Modifications
The camper furniture can be installed or removed in a few minutes.
Its modular, self-install design allows you to convert your Traveller without permanently altering the bodywork, original floor or interior trim.
Before manufacturing, the furniture and folding supports are adapted to the confirmed vehicle dimensions and seating configuration.
🔒 Secure Attachment While Travelling
The camper box must always be properly fastened using suitable securing points whenever the vehicle is moving.
The exact attachment method depends on the Peugeot Traveller version and available original anchoring points.
Dedicated compartments keep the table leg and folding bed supports stored inside the furniture, helping reduce movement and unwanted noise in the luggage area.
🚐 Everyday Use with the Camper Box Folded
While travelling, the Peugeot Traveller Camper Box remains folded inside the rear luggage area.
The made-to-measure New Design mattress pack can also travel stored within the same rear setup in compatible configurations.
This keeps the vehicle organized and allows the bed, table and storage system to be unfolded after arriving at the destination.
Use of the original parcel shelf and the resulting rear visibility depend on the Traveller body length, interior trim and selected furniture configuration.
🪑 Camper Kit with Folded Rear Seats
For compatible passenger layouts, the folding bed extension rests on the folded rear seats or adapted support points.
The furniture is normally manufactured at approximately 55 cm high to align with the level of the folded seats.
The contact surfaces and support points are adapted to help protect the seats and avoid concentrated pressure when the bed is used correctly.
The exact number of operational seats depends on the original seat arrangement, rail system, body length and camper furniture configuration.
📦 Lower Camper Furniture Without Rear Seats
When the rear seats are removed, the Peugeot Traveller camper conversion kit can normally be manufactured at approximately 40–44 cm high.
The lower configuration provides more usable interior space, increased headroom and a lower sleeping platform.
In this layout, the folding bed extension is supported by the main camper module and suitable folding or removable legs.
📋 Detailed Peugeot Traveller Compatibility Check
To manufacture a properly adapted camper furniture kit, we confirm:
✅ Model year.
✅ Body length: XS, M or XL.
✅ Passenger configuration and original seat arrangement.
✅ Seat-rail and folding systems.
✅ Wheel arches and plastic wheel-arch covers.
✅ Rear air-conditioning equipment.
✅ Interior trim affecting the available width.
✅ Original anchoring points.
✅ Preferred camper furniture height.
✅ Fridge position and accessories selected.
📩 Send us these details and photographs of the luggage area for a personalized compatibility check:
Frequently Asked Questions About the Peugeot Traveller Camper Kit
Which Peugeot Traveller versions are compatible with the camper kit?
The camper furniture can be adapted to compatible Peugeot Traveller XS, M and XL passenger vans. Exact compatibility depends on the model year, body length, seat arrangement, rail system, interior trim, wheel arches, rear air-conditioning equipment and available anchoring points.
Does the Peugeot Traveller Camper Box require homologation?
When used as a removable system without permanent vehicle modifications, the camper furniture is normally treated as securely fastened cargo rather than a fixed conversion. It must always be properly secured while travelling. Requirements can vary by country, vehicle and installed accessories, so the applicable local regulations should be checked.
Can I keep the original passenger seats with the Peugeot Traveller camper kit?
Compatible configurations can retain selected original passenger seats. The exact number of usable seats depends on the Peugeot Traveller body length, original seat arrangement, rail system and selected camper furniture configuration.
What are the bed dimensions of the Peugeot Traveller Camper Kit?
The folding bed is approximately 185–190 cm long. The central furniture is normally approximately 115–120 cm wide, while optional side modules extend the sleeping surface according to the vehicle trim and custom mattress configuration.
What is included with the Peugeot Traveller Camper Furniture Kit?
The kit includes a removable folding bed structure, a made-to-measure New Design dark grey mattress pack, a rear kitchen drawer prepared for a compatible Campingaz-style stove, a multi-height indoor and outdoor table, storage compartments and the required folding bed supports. The exact layout depends on the selected configuration.
Which materials and accessories are available for the Peugeot Traveller camper kit?
The furniture is available in 15 mm poplar plywood, natural phenolic plywood or dark HPL phenolic plywood. Compatible options can include a Coolzone 35L compressor fridge, slide-out fridge drawer, foldable sink, 12V outdoor shower with 20L tank, thermal blackout covers, auxiliary battery system, modular 2+1 configuration and an independent California-style sink and kitchen unit.
Customer Reviews of Kit Muebles Camper
Rated 4.9 Out of 5 Based on 51 Customer Reviews
Customers can view genuine reviews, photographs and completed camper furniture projects through our different locations and service areas.
⭐ Overall customer rating: 4.9/5 from 51 reviews
🇪🇸 Madrid – Arganda del Rey
https://maps.app.goo.gl/YR3S8WCe1pqdb1Xb7
🇪🇸 Barcelona – Tordera
https://maps.app.goo.gl/bHjBo51GtmkenoCa7
🇪🇸 Seville – Écija
https://maps.app.goo.gl/13MZuMieqKebSP9w6
🇫🇷 France – Narbonne / Argeliers area
https://maps.app.goo.gl/6HwG9uanwFepyD6cA
Order Your Peugeot Traveller Camper Furniture Kit
Custom Removable Camper Box with Folding Bed and New Design Mattress Pack Included
Transform your Peugeot Traveller into a practical camper with a custom-made, removable furniture kit designed for travel and everyday vehicle use.
Choose your preferred furniture material, XS/M/XL body length, seating configuration, camper box height, fridge position and compatible accessories.
Before manufacturing, we personally confirm the vehicle details to prepare the most suitable configuration.
✅ Folding bed approximately 185–190 cm long.
✅ Made-to-measure New Design dark grey mattress pack included.
✅ Rear kitchen drawer prepared for a compatible Campingaz-style stove.
✅ Multi-height indoor and outdoor table.
✅ Modular storage compartments.
✅ Compatible layouts with or without rear seats.
✅ Optional Coolzone 35L compressor fridge and modular accessories.
👉 Buy the Peugeot Traveller Camper Furniture Kit:
📩 Request a Personalized Compatibility Check by WhatsApp:
Thank you for trusting Kit Muebles Camper. Above all, thanks be to God for every project, every journey and every opportunity to serve.
Thanks be to God.