Cart
0
0.00 €
Nissan Primastar & NV300 Camper Box – Custom Removable Camper Furniture Kit
Removable, self-install camper furniture for Nissan Primastar and NV300 L1/L2 vans, with a 185–190 cm bed, New Design mattress pack, rear kitchen, multi-height table, storage and Coolzone 35L fridge compatibility.
Removable Nissan Primastar & NV300 Camper Kit for L1 and L2 Vans
Camper Furniture with a 185–190 cm Bed, New Design Mattress Pack, Rear Kitchen and Modular Storage
Transform your Nissan Primastar or NV300 into a practical camper van with a removable, self-install camper furniture kit designed for travel, camping and everyday vehicle use.
The modular furniture system is available for compatible Nissan Primastar and NV300 L1 and L2 passenger or cargo configurations. Before manufacturing, we confirm the exact model year, body length, seat arrangement, wheel-arch trim, rear air-conditioning equipment and available anchoring points.
The Nissan Primastar and NV300 camper kit can include:
✅ A folding camper bed approximately 185–190 cm long and 152–155 cm wide, depending on the configuration.
✅ A made-to-measure New Design dark grey mattress pack, included with every furniture material.
✅ A rear pull-out kitchen drawer prepared for a compatible Campingaz-style stove.
✅ A multi-height table that can be used inside the van in dining or lounge mode and outside the vehicle when camping.
✅ Several storage trunks and side compartments for food, clothes, water, camping equipment or a portable WC.
✅ Side modules covering compatible wheel-arch areas and extending the sleeping surface across the rear interior.
✅ A dedicated compartment or sliding support for the recommended Coolzone 35L compressor fridge.
✅ A compact two-part folding structure adapted for compatible layouts with or without rear seats.
When folded, the removable camper kit for Nissan Primastar and NV300 remains within the rear area, helping the van stay practical for everyday transport, work or passenger use.
In compatible passenger layouts, selected rear seats can remain usable. The exact number of seats depends on the L1 or L2 body, original seat arrangement and selected furniture configuration.
In a removable-use configuration, the system is normally treated as correctly secured cargo rather than a fixed conversion. It must always be properly secured while travelling, and local requirements should be checked according to the country, vehicle and accessories installed.
👉 Buy the Nissan Primastar & NV300 camper furniture kit with New Design mattress pack included:
Nissan Primastar & NV300 Camper Box – Removable Camper Kit with Mattress Pack – Special Offer 750€
Nissan Primastar & NV300 Camper Box – Removable Camper Kit with Mattress Pack Included
Nissan Primastar & NV300 Generations Compatible with Our Camper Kit
Custom-Made Camper Furniture for Primastar and NV300 L1/L2 Passenger and Cargo Vans
We specialize in custom camper furniture kits for Nissan Primastar and NV300 vans, manufactured according to the exact generation, body length, seat layout and interior configuration of each vehicle.
The Primastar and NV300 names cover different production periods and interior layouts. For this reason, we use specific manufacturing templates rather than assuming that one camper module fits every version without adjustment.
Our removable camper furniture can be prepared for compatible L1 and L2 passenger, crew and cargo configurations after checking the vehicle details.
Nissan Primastar and NV300 Production Periods
✅ Original Nissan Primastar: 2002–2014
The original Primastar is based on the same vehicle architecture as the Renault Trafic II and the corresponding Opel Vivaro generation.
Compatibility depends on the exact model year, body length, number of seats, interior trim, wheel-arch layout and rear equipment.
✅ Nissan NV300: 2016–2021
Nissan introduced the NV300 in 2016 as the replacement for the original Primastar. It shares its main vehicle architecture with the Renault Trafic III and other related medium vans from the same production period.
The Nissan NV300 camper furniture kit can be adapted to compatible L1 and L2 passenger or cargo layouts.
✅ Current Nissan Primastar: From 2021
In 2021, Nissan reorganized its European commercial-vehicle range and replaced the NV300 name with Primastar.
The current Primastar remains available in different L1 and L2 cargo and passenger configurations. Compatibility must be checked according to the exact version, seat arrangement and rear interior.
Nissan Primastar and NV300 L1 vs L2 Camper Configurations
Camper Furniture Adapted to Body Length, Seats and Interior Equipment
The removable camper kit for Nissan Primastar and NV300 can be manufactured for the two principal body lengths:
✅ L1 or standard wheelbase – compact rear furniture layout designed to balance sleeping space, storage and everyday vehicle use.
✅ L2 or long wheelbase – provides additional rear depth, allowing more storage space and greater flexibility when retaining compatible passenger seats.
The final camper layout can vary according to:
✅ Passenger, crew or cargo version
✅ Number and position of the original seats
✅ Wheel-arch covers or exposed metal wheel arches
✅ Rear air-conditioning equipment
✅ Interior panels and floor height
✅ Original anchoring and load-restraint points
✅ Selected fridge, shower, kitchen and storage configuration
Platform-Related Vans and Model-Specific Compatibility
Some versions of the Fiat Talento, Mitsubishi Express, Renault Trafic and previous Opel Vivaro share related vehicle architecture with the Nissan NV300 or Primastar.
However, this does not mean that the same furniture module can automatically be transferred between every model. Interior trim, wheel arches, seat anchoring points, rear air conditioning and boot dimensions may differ.
We therefore confirm every model individually and use the corresponding manufacturing template before producing or shipping the camper furniture.
Made-to-Measure Nissan Primastar & NV300 Camper Furniture
Once we verify the exact vehicle, we manufacture the Nissan Primastar or NV300 camper box according to its real interior dimensions.
This vehicle-specific process provides:
✅ Correct furniture width and installation height
✅ A properly supported folding bed system
✅ Made-to-measure New Design mattress pack
✅ Suitable storage around the wheel arches
✅ Compatibility with the selected rear seats
✅ Correct positioning for the Coolzone 35L compressor fridge
✅ A compact removable installation without permanent drilling
Before ordering, send us the model year, L1 or L2 body length, number of seats and photographs of the boot and rear interior so we can confirm the appropriate configuration.
Removable Camper Conversion Kit for Nissan Primastar & NV300
Self-Install Camper Box for Compatible Passenger and Cargo Configurations
The Nissan Primastar and NV300 camper conversion kit is designed to transform your van into a practical camper without permanently modifying its main structure.
Its removable and modular design allows the camper furniture to be installed or removed quickly, making it suitable for customers who want to alternate between travel, work, passenger transport and everyday vehicle use.
In compatible passenger configurations, selected original seats can remain usable when the removable camper box and New Design mattress pack are folded into the rear area.
The exact number of seats that can be retained depends on:
✅ L1 or L2 body length
✅ Original passenger-seat arrangement
✅ Position of the seat anchoring points
✅ Wheel-arch trim and interior panels
✅ Rear air-conditioning equipment
✅ Height and depth of the selected furniture layout
✅ Accessories installed inside the camper module
Long-wheelbase L2 versions normally provide more rear space and greater flexibility, but the complete seat arrangement must always be checked before manufacturing.
Removable Camper Furniture and Homologation Requirements
In a removable-use configuration, the Nissan Primastar and NV300 camper furniture kit is normally treated as correctly secured cargo rather than a permanent vehicle conversion, so it generally does not require homologation.
The furniture must always be correctly positioned and secured to suitable load-restraint or anchoring points while travelling.
Requirements may vary according to the country, vehicle classification, installation method and accessories fitted. Electrical systems, fixed equipment and other permanent modifications must be reviewed separately under the applicable local regulations.
Compact Folded Camper Box for Everyday Van Use
When folded, the furniture and modular mattress sections remain within the rear area of the van.
Depending on the selected Primastar or NV300 configuration, this can provide:
✅ A compact and organized rear furniture module
✅ Selected passenger seats available for everyday use
✅ Clear rear visibility in compatible layouts
✅ A discreet boot area below the window line
✅ Quick transition between driving and sleeping modes
✅ Practical storage for the mattress, table and bed supports
The result is a removable Nissan Primastar camper box that combines a large sleeping area, kitchen, table and storage with daily vehicle practicality.
Materials for the Nissan Primastar & NV300 Camper Furniture Kit
Three 15 mm Plywood Finishes: Lightweight, Waterproof and Easy to Maintain
The Nissan Primastar and NV300 camper kit can be manufactured in three different 15 mm plywood materials.
Every option includes the made-to-measure New Design dark grey mattress pack. The current online price starts from approximately €875, depending on the material, vehicle configuration, retained seats and selected accessories.
Always check the online shop for the current price and available options before ordering.
Natural Poplar Plywood – Lightweight and Moisture-Resistant
Natural poplar plywood has a very light colour, close to white, with subtle wood grain.
It is the lightest of the three available materials, making a larger Primastar or NV300 camper module easier to handle, install and remove.
✅ Thickness: 15 mm
✅ Finish: very light natural wood
✅ Main advantage: lowest weight and easy handling
✅ Moisture protection: hydrofuge and highly resistant to humidity
✅ Durability: strong and difficult to split or break
Poplar plywood is not completely waterproof. Its surface is also softer than the phenolic options, so pressure from keys, tools or sharp objects can leave visible marks.
It is recommended for customers who prioritize reduced weight, natural colour and convenient removal.
Natural Wood Phenolic Plywood – Waterproof with a Rustic Finish
Natural wood phenolic plywood has a medium-light wood tone with visible grain, creating a warm cabin-style appearance inside the van.
The phenolic treatment between its layers prevents the panels from swelling or rotting when exposed to water under normal camper use.
✅ Thickness: 15 mm
✅ Finish: natural rustic wood grain
✅ Main advantage: waterproof structure and greater surface resistance
✅ Durability: strong and suitable for frequent travel
✅ Maintenance: practical for humidity, condensation and regular use
This material is slightly heavier than poplar and has a more porous natural surface, but it provides an excellent balance between appearance, resistance and waterproofing.
Coachbuilder HPL Phenolic Plywood – Premium Dark Finish
Coachbuilder HPL phenolic plywood has a very dark brown finish, almost black, and is the most resistant material in the range.
It is phenolic-treated inside and outside and protected by an HPL surface that helps prevent dirt from adhering, making the furniture easier to clean and maintain.
✅ Thickness: 15 mm
✅ Finish: very dark brown or almost black
✅ Main advantage: maximum strength and long-term durability
✅ Water protection: waterproof inside and outside
✅ Surface: easy-clean, anti-adherent HPL coating
✅ Recommended use: intensive travel and frequent camper use
HPL phenolic plywood is the heaviest of the three options, although it remains suitable for removable camper furniture when the module is handled correctly.
Choose the Best Material for Your Primastar or NV300 Camper Box
Your choice depends on the qualities you value most:
✅ Natural poplar plywood: best for minimum weight and easy handling
✅ Natural phenolic plywood: best for rustic appearance and waterproof performance
✅ Coachbuilder HPL phenolic plywood: best for maximum durability and easy cleaning
All three options are manufactured according to the exact Nissan Primastar or NV300 configuration and include the New Design dark grey mattress pack.
👉 Check current prices, materials and vehicle configurations:
Camper Furniture Kit Materials – Differences, Properties & Durability
Features of the Nissan Primastar & NV300 Camper Furniture Kit
Modular Camper Box with Rear Kitchen Drawer, Multi-Height Table and Smart Storage
The Nissan Primastar and NV300 camper furniture kit combines a rear kitchen area, multi-height table and multiple storage compartments in a removable layout designed for travel, camping and everyday van use.
The exact arrangement is adapted to the L1 or L2 body length, retained seats, wheel-arch trim, rear air conditioning and selected accessories.
Rear Kitchen Drawer for a Campingaz-Style Stove
Pull-Out Cooking Module with Independent Storage Compartment
The main furniture module includes a custom pull-out kitchen drawer prepared for a compatible Campingaz-style stove.
It is normally configured for a one-burner stove, although a larger compatible cooker can be accommodated when the selected drawer dimensions and furniture layout permit it.
Behind the kitchen drawer, there is an independent storage trunk with a top-opening lid. This compartment can be used for:
✅ Cooking utensils and tableware
✅ Food and pantry items
✅ Pots, pans and small kitchen accessories
✅ Camping and travel equipment
The rear-facing layout provides convenient access from the tailgate and keeps the cooking area separate from the sleeping space.
Multi-Height Table for Indoor and Outdoor Camper Use
Dining, Lounge and External Table Configurations
At the centre of the Primastar and NV300 camper box, there is a multi-position table designed for use both inside and outside the van.
Depending on its position, the table provides:
✅ Dining mode for eating comfortably inside the vehicle
✅ Lounge mode for creating a relaxed sofa-style layout
✅ Outdoor mode for cooking, eating or resting beside the van
✅ Compact storage mode when the camper furniture is folded
The different table positions and interior layouts can be seen in the demonstration video on this page.
Storage Compartments inside the Primastar & NV300 Camper Box
Top-Access Trunks and Front-Opening Storage for Travel Equipment
Behind the central table, the camper furniture includes an additional top-opening storage trunk.
In the configuration shown in the demonstration video, the left-hand side of the kit incorporates two further storage compartments: one positioned towards the rear and another towards the centre of the furniture.
These storage areas can be configured for:
✅ Clothes, bedding and personal equipment
✅ Food, cookware and camping accessories
✅ A portable WC or Potti
✅ A water tank and portable 12V shower
✅ A Coolzone 35L compressor fridge
✅ Electrical equipment or an auxiliary battery system
The configuration shown can provide two top-access trunks and three front-access compartments. The final number and position of the compartments may vary according to the seats retained and the selected interior layout.
Side Storage Modules around the Wheel Arches
Additional Storage and a Wider Sleeping Surface
Depending on the vehicle configuration, two side modules can be incorporated around the wheel-arch areas.
These modules help use the full interior width of the Nissan Primastar or NV300 and can provide additional storage for bedding, clothing, footwear or travel accessories.
Their top surfaces also help extend the sleeping platform towards the sides of the van, creating a bed approximately 152–155 cm wide, depending on the wheel-arch covers, interior trim and mattress configuration.
Coolzone 35L Compressor Fridge Integration
Rear Compartment or Front Sliding Fridge Drawer
For the Nissan Primastar and NV300 camper conversion, we recommend the Coolzone 35L compressor fridge.
Depending on the selected furniture layout, the fridge can be positioned in two principal locations:
✅ Inside a made-to-measure rear storage compartment
✅ On a dedicated front slide-out fridge drawer
The rear-compartment configuration keeps the fridge integrated inside the main furniture module. The front sliding configuration provides easier access when the camper bed is unfolded.
A front sliding fridge module may require approximately 25 mm of additional clearance for the runners and correct operation. The exact position must also allow sufficient ventilation, cable access and safe opening of the fridge lid.
Practical Storage Layout for Every Type of Journey
The goal of this modular arrangement is to create a Nissan Primastar and NV300 camper furniture kit that remains organized, versatile and easy to use.
With its rear kitchen drawer, multi-height table, storage trunks, optional side modules and Coolzone 35L fridge integration, the system can be adapted for:
✅ Weekend camping trips
✅ Longer road journeys
✅ Daily passenger or cargo use
✅ Travel with water, kitchen and electrical accessories
✅ Compatible layouts with or without rear seats
Before manufacturing, we confirm the exact vehicle and accessory configuration so every compartment serves a practical purpose inside the camper setup.
Nissan Primastar & NV300 Camper Box – 35L Slide-Out Fridge Drawer Example
Dimensions, Bed and Mattress Pack for the Nissan Primastar & NV300 Camper Kit
Made-to-Measure Camper Furniture for L1/L2 Vans with or without Rear Seats
The dimensions of the Nissan Primastar and NV300 camper furniture kit are adapted to the exact vehicle configuration.
The final measurements may vary according to the L1 or L2 body length, retained rear seats, wheel-arch trim, rear air conditioning, interior panels and selected accessories.
Before manufacturing, we check these details to ensure that the furniture, folding bed and New Design mattress pack work correctly inside the vehicle.
Nissan Primastar & NV300 Camper Kit Measurements
Furniture Width, Bed Length, Depth and Installation Height
As a general reference, the approximate measurements are:
✅ Furniture width without mattress pack: approximately 152 cm
✅ Total bed width with mattress pack: approximately 155 cm
✅ Main furniture-module depth: approximately 120 cm
✅ Bed length: approximately 185–190 cm
✅ Installation height with compatible folded rear seats: approximately 55 cm
✅ Installation height without rear seats: approximately 40–44 cm
These measurements may change slightly according to the interior configuration and required support system.
The demonstration videos on this page show examples of the furniture with different seat arrangements, heights and wheel-arch layouts.
Bed Width and Side Modules around the Wheel Arches
Wall-to-Wall Sleeping Surface with Additional Storage
Depending on the vehicle layout, the Primastar and NV300 camper box includes or can be configured with side modules positioned around the wheel arches.
These modules help extend the sleeping platform across the available rear width, creating a bed approximately 152–155 cm wide.
Each compatible side module can also provide top-opening storage for:
✅ Bedding, blankets and pillows
✅ Clean clothes and personal belongings
✅ Footwear or camping accessories
✅ Used clothing or laundry
This arrangement makes practical use of the space above and around the wheel arches without compromising the central furniture layout.
If the van has plastic wheel-arch covers, rear air conditioning or other interior equipment, removable side wings or adapted modules can be used to obtain the correct fit.
Dual-Access Storage Trunk for Water and Portable WC
Practical Top and Front Access inside the Camper Furniture
For compatible configurations, we recommend a left-hand storage trunk with both top and front access.
This dual-access layout allows the compartment to remain usable when the bed is folded or unfolded and provides practical storage for:
✅ A water container for the portable 12V shower
✅ Camping and cleaning equipment
✅ A portable WC or Potti
✅ Clothes or personal travel accessories
When the selected layout permits it, the portable WC can be stored beneath the table area and moved temporarily to the front of the van when required.
This keeps the left-hand storage trunk available for water, shower equipment or other frequently used accessories.
Storage Trunks versus Double Drawers
Why Trunks Usually Provide More Usable Camper Storage
A double-drawer layout can be manufactured upon request, but it is not normally our recommended configuration.
Additional drawers require internal panels, runners and structural reinforcement. This takes up space inside the furniture and reduces the total usable storage volume.
Full-extension drawers also create greater leverage on the runners when loaded. When this configuration is selected, we use reinforced slides designed to support approximately 30–40 kg, depending on the final layout.
For most customers, top- and front-opening storage trunks provide:
✅ More usable internal volume
✅ Fewer mechanical components
✅ Easier access from different positions
✅ Greater durability during regular camper use
✅ More flexibility for water tanks, a Potti or camping equipment
The principal exception is the compressor fridge, for which a dedicated sliding support can provide easier access.
New Design Mattress Pack for Nissan Primastar & NV300
Modular Dark Grey Mattress Sections Included with Every Camper Kit
Every Nissan Primastar and NV300 camper kit includes a made-to-measure New Design dark grey mattress pack.
The mattress is divided into modular sections designed to work with the folding furniture and different interior positions:
✅ Sleeping mode
✅ Dining mode
✅ Lounge or sofa mode
✅ Reclined or hammock position
✅ Folded storage mode
The individual sections make it easier to access storage compartments without dismantling the complete sleeping area.
Each mattress pack is manufactured according to the final furniture dimensions, helping the sections align correctly and provide a comfortable, continuous sleeping surface.
Design, Strength and Long-Term Durability
Furniture Finishes Coordinated with the Dark Grey Mattress Pack
The New Design dark grey mattress pack combines with the three available furniture finishes:
✅ Light natural poplar plywood
✅ Rustic natural wood phenolic plywood
✅ Dark Coachbuilder HPL phenolic plywood
This provides a balanced visual combination between the furniture, mattress pack and vehicle interior.
Beyond appearance, our priority is to manufacture a strong and durable removable camper kit capable of supporting regular folding, loading, travel and camping use.
With correct installation, suitable securing and normal care, the furniture is designed to remain practical and reliable for many years.
Coolzone 35L Fridge Compatibility and Available Space
The recommended Coolzone 35L compressor fridge can be integrated into a compatible rear compartment or dedicated sliding support.
Its final position must be considered when defining the furniture measurements so there is sufficient space for ventilation, cable access, opening the lid and operating the sliding system.
👉 More information about our made-to-measure New Design camper mattress packs:
Structure, Stability & Height Options of the Nissan Primastar & NV300 Camper Kit
Secure Folding System with Built-In Storage for the Table and Bed Supports
Every Nissan Primastar and NV300 camper furniture kit includes dedicated storage compartments for the table leg and removable bed supports. When the camper module is folded, all these components remain securely stored inside the furniture structure instead of moving freely around the load area.
This integrated storage system keeps the rear of the van tidy and organised while helping prevent unwanted movement or rattling noises during travel. The table, bed supports and other removable components remain conveniently accessible whenever the camper furniture needs to be unfolded.
The exact position and dimensions of these storage compartments are adapted to the selected configuration, including the L1 or L2 body length, original seat arrangement, rear interior trim, wheel arches and any rear air-conditioning equipment.
Two-Part Folding Bed Structure for Primastar and NV300 Vans
In compatible versions of the Nissan Primastar and NV300 camper kit, the furniture distributes the sleeping platform and its load across two main structural sections:
Main camper furniture module: this is the largest and most substantial section of the system. It remains positioned on the rear load floor and contains the kitchen drawer, table, storage trunks and compatible fridge compartment.
Folding bed extension: this section unfolds towards the front of the van to complete the sleeping platform. Depending on the selected layout, it can rest on compatible folded rear seats, removable or foldable support legs, or a combination of seats and legs.
This two-section design creates a solid and compact sleeping platform while avoiding the need for a permanently installed bed structure. It also allows the furniture to be folded back into the rear area when the full bed is not required.
The final support system is manufactured according to the exact interior configuration of the vehicle. Before production, we verify whether the van retains rear seats, how those seats fold, the available load-floor height and the position of the original anchoring points.
Camper Furniture Height with Rear Seats Retained
For Nissan Primastar and NV300 passenger configurations that retain compatible rear seats, the camper furniture is normally manufactured to align with the height of the folded seats.
In these layouts, the sleeping platform is generally positioned at approximately 55 cm high, although the exact measurement can vary slightly according to:
The model year and vehicle generation.
The L1 or L2 body length.
The original rear-seat configuration.
The height and shape of the folded seats.
The interior floor and wheel-arch trim.
Rear air-conditioning ducts or other original equipment.
This configuration allows selected passenger seats to remain installed while providing a level sleeping platform when the removable camper bed is unfolded. The exact number of seats that can remain usable depends on the original vehicle layout and the chosen camper furniture configuration.
Lower Camper Furniture for Vans without Rear Seats
If the Nissan Primastar or NV300 is used without rear passenger seats, the camper furniture can normally be manufactured at a lower height of approximately 40–44 cm.
This lower configuration offers several practical advantages:
✅ A lower sleeping position and more headroom above the mattress.
✅ Easier access to the bed and rear storage compartments.
✅ A compact furniture structure adapted to cargo or work-van interiors.
✅ Storage capacity distributed beneath the bed platform and inside the main module.
The final height is determined after checking the interior floor, wheel arches, side panels, rear air-conditioning equipment and the customer's preferred storage layout.
A lower module does not necessarily mean less storage. The internal compartments can be reorganised according to the accessories selected, including the kitchen drawer, water container, portable WC, folding table and Coolzone 35L compressor fridge.
Stable Weight Distribution and Protection of the Vehicle Interior
The two-part folding system is designed to distribute the load between the main rear module and the correctly positioned supports beneath the bed extension.
In configurations with compatible folded rear seats, part of the extension can rest over the seats using the support arrangement designed for that vehicle. In configurations without rear seats, the folding platform is supported by removable or foldable legs positioned on the vehicle floor.
This system has been developed to provide a firm, level and stable sleeping platform while reducing concentrated pressure on any single part of the vehicle interior. When correctly installed and used, the support structure helps protect the original seats, upholstery and interior trim beneath the camper bed.
The furniture must always be installed according to the supplied configuration, with every support placed in its correct position before using the bed. While travelling, the folded module and its components must remain properly secured to suitable load or anchoring points.
Compact Storage for Everyday Driving and Camper Travel
When the bed is folded, the Nissan Primastar and NV300 removable camper kit remains compact within the rear area of the van. The table leg, bed supports and mattress sections are stored as part of the complete camper system, helping maintain an organised interior for everyday transport, work or passenger use.
This modular structure makes it possible to alternate between daily driving and camper mode without installing permanent furniture. Compatibility, retained seating capacity and the final folded dimensions are confirmed before manufacturing according to the exact vehicle and selected equipment.
You can view the available Nissan Primastar and NV300 camper furniture configurations, materials and the New Design dark grey mattress pack in our online store.
Buy Your Nissan Primastar & NV300 Camper Furniture Kit Online
Choose the material, height, storage layout and accessories for your Nissan Primastar or NV300 removable camper kit. Every configuration includes the made-to-measure New Design dark grey mattress pack.
Before manufacturing, we confirm the model year, L1 or L2 body length, original seat arrangement, interior trim, rear air-conditioning equipment and available anchoring points.
👉 Buy the Nissan Primastar & NV300 Camper Furniture Kit:
👉 Need help choosing the correct configuration? Contact us on WhatsApp:
Nissan Primastar & NV300 Camper Box – Removable Camper Kit to Keep the 3rd Row of Seats Installed
Available Configurations & Compatible Accessories for the Nissan Primastar & NV300 Camper Kit
Customize Your Primastar or NV300 Camper Setup with Practical Accessories and Modular Upgrades
The Nissan Primastar and NV300 Camper Furniture Kit can be combined with different accessories and configurations according to your travel style, required autonomy, available storage space and original vehicle layout.
Before manufacturing, we confirm the compatibility of every accessory with the model year, L1 or L2 body length, passenger or cargo configuration, retained seats, wheel-arch trim, rear air conditioning and selected furniture layout.
Foldable Camper Sink with Drain Plug
The foldable sink is a compact alternative to a conventional fixed sink. It can be integrated into a compatible wooden panel and combined with the portable 12V shower, allowing the shower head to function as a removable faucet.
The folding drainer includes a drain plug and provides a practical washing area without permanently occupying valuable storage space.
👉 View the Foldable Camper Sink:
12V Outdoor Shower with 20L Water Tank
The portable 12V shower includes a 20-litre water tank and can be used for outdoor showering, washing dishes, cleaning equipment or rinsing bikes and footwear.
Its final storage position depends on the selected Primastar or NV300 furniture layout. In compatible configurations, the tank can be stored inside a dual-access side trunk or another dedicated compartment.
👉 View the 12V Outdoor Shower with 20L Water Tank:
https://www.kitmueblecamper.com/p/12v-outdoor-camper-shower-20l-portable-water-tank/
Custom Campingaz 1-Burner Stove
The standard cooking accessory is a custom Campingaz-style 1-burner stove designed for the rear pull-out kitchen drawer.
A larger compatible stove can be considered after checking its dimensions and the available drawer space. The stove should only be used when the vehicle is parked, with adequate ventilation and according to the manufacturer's safety instructions.
👉 Buy the Custom Campingaz 1-Burner Stove:
https://www.kitmueblecamper.com/p/custom-campingaz-1-burner-stove-for-our-camper-furniture/
Sliding Fridge Drawer with Folding Support Brackets
A front sliding fridge drawer can be added to improve access to a compatible compressor fridge. Folding support brackets help stabilise the extended drawer while the fridge is in use.
This configuration requires additional installation space. Depending on the design, approximately 25 mm of extra clearance may be needed for the front sliding mechanism. We confirm the available space and furniture layout before manufacturing.
👉 View the Supplement for a Fridge Drawer and Folding Brackets:
https://www.kitmueblecamper.com/p/suplemento-adiocinal-por-bandeja-de-nevera-o-modalidad-2-1/
Coolzone 35L Compressor Fridge
For the Nissan Primastar and NV300 camper kit, we normally recommend the Coolzone 35L compressor fridge because it offers a practical balance between capacity, dimensions and compatibility with the available furniture compartments.
The fridge can be positioned inside a made-to-measure rear compartment or on a compatible front sliding drawer, depending on the selected configuration.
👉 Buy the Coolzone 35L Compressor Fridge:
9-Layer Thermal Blackout Window Covers
The insulated blackout covers improve privacy, reduce incoming light and help limit heat transfer through the vehicle windows.
The set is prepared according to the exact Nissan Primastar or NV300 window configuration. Photos must be supplied before ordering so we can confirm the rear-door arrangement, side windows and any special glass or panoramic-roof requirements.
👉 View the 9-Layer Thermal Blackout Covers:
https://www.kitmueblecamper.com/p/blackout-shades-thermal-insulation-for-camper-vans1/
2+1 Modular Camper Furniture Configuration
The 2+1 layout divides the furniture into two removable modules. The larger +2 module can provide a single sleeping area while leaving additional interior load space for a bicycle, surfboard, work equipment or other bulky gear.
When the +1 module is added, the system creates the complete double-bed configuration. This option is especially useful for customers who alternate between solo travel, sports equipment and trips for two people.
Compatibility depends on the vehicle layout, retained seats and selected storage configuration.
👉 See the 2+1 Modular Camper Furniture Layout:
https://www.kitmueblecamper.com/en/kit-mueble-camper/version-2-1/
Auxiliary Battery System
An auxiliary battery system can provide independent 12V power for the compressor fridge, lighting, USB charging points, shower pump and other compatible accessories without relying exclusively on the vehicle's starter battery.
Different systems are available with or without an inverter. The electrical configuration, charging system, cable protection and any fixed components must be reviewed according to the vehicle and local regulations.
👉 View the Auxiliary Battery System:
https://www.kitmueblecamper.com/p/camper-auxiliary-battery-power-supply-for-camper-vans/
Independent Camper Sink and Kitchen Unit
The independent sink and kitchen cabinet is designed for compatible medium and large vans. It can include clean and waste-water tanks, an integrated drain, a 12V shower pump that functions as a faucet, two cutlery drawers and a larger storage compartment for cookware.
Its dimensions can be adapted so the unit is positioned behind the driver's seat, beneath a compatible side window or at the rear of the van. The final position and measurements must be confirmed according to the selected camper furniture layout.
👉 View the Independent Camper Sink and Kitchen Unit:
https://www.kitmueblecamper.com/p/camper-sink-kitchen-unit-compatible-with-camper-furniture-kits/
See the Accessories and Configurations in the Demonstration Video
The videos on this page show practical examples of several accessories, storage layouts and camper furniture configurations.
Accessories are sold separately and their compatibility must be confirmed before manufacturing. You can add the available products to your shopping cart or contact us on WhatsApp so we can prepare the complete order according to your Nissan Primastar or NV300.
👉 Contact us on WhatsApp:
Installing the Nissan Primastar & NV300 Camper Furniture Kit
Quick Removable Setup without Permanent Vehicle Modifications
The Nissan Primastar and NV300 Camper Furniture Kit is designed as a removable, self-install camper system. In compatible configurations, it can be placed inside the rear area without permanent drilling or fixed modifications to the vehicle.
The furniture is delivered assembled and prepared for the previously confirmed vehicle configuration. Installation does not normally require specialist tools, although the securing method and any necessary hardware depend on the original anchoring points, seats and selected accessories.
Once correctly positioned and secured, the module can be unfolded to create the camper bed, rear kitchen and living area whenever the vehicle is parked.
Secure Fixing while Travelling
Before driving, the camper furniture must be correctly secured to suitable load or anchoring points according to the supplied configuration.
The table leg, bed supports and removable components have dedicated storage positions inside the furniture, helping keep them organised and reducing movement or rattling during travel.
Any fridge, water tank, portable stove, battery or other accessory must also be stored and secured correctly before the vehicle is moved.
Everyday Use with the Camper Module Folded
When folded, the removable furniture and New Design dark grey mattress pack remain within the rear area, helping keep the Nissan Primastar or NV300 practical for everyday transport, work or passenger use.
In compatible passenger configurations, selected rear seats can remain usable. The exact number of seats depends on the body length, original seat layout, anchoring system and final furniture configuration.
Where the vehicle interior permits it, an original parcel shelf, load separator or another compatible privacy solution may be retained. This must be checked individually because the available height and rear trim vary between versions.
Installation Height with Compatible Rear Seats
When compatible rear seats remain installed, the sleeping platform is normally aligned with the folded-seat height.
The installation height is generally approximately 55 cm, although the final measurement depends on the seat design, floor level, wheel-arch trim and other original equipment.
This configuration can allow selected passenger seats to remain available while providing the necessary support for the folding bed platform.
Lower Installation without Rear Seats
For cargo configurations or layouts without rear passenger seats, the furniture can generally be manufactured at approximately 40–44 cm high.
The lower installation provides additional headroom above the mattress while maintaining storage inside the main furniture module and beneath compatible sections of the bed.
The exact height is confirmed according to the interior floor, wheel arches, rear air conditioning, side trim and chosen accessories.
Compatibility with Primastar and NV300 L1/L2 Configurations
The camper furniture kit can be manufactured for compatible:
Nissan Primastar models produced from 2002 to 2014.
Nissan NV300 models produced from 2016 to 2021.
Current Nissan Primastar versions produced from 2021.
Compatibility must be verified according to the exact model year, L1 or L2 body length, passenger or cargo configuration, number and position of seats, wheel-arch covers, rear air-conditioning equipment and available anchoring points.
We do not assume that every body or interior configuration uses identical measurements. Before manufacturing, send us the vehicle year, body length, seat arrangement and photographs of the rear interior so we can confirm the correct template.
Removable Use, Secured Cargo and Local Requirements
In a removable-use configuration, the Nissan Primastar and NV300 camper furniture is normally treated as correctly secured cargo rather than a permanently installed vehicle conversion.
The module and every accessory must remain correctly secured while travelling. Technical-inspection, transport and homologation requirements can vary according to the country, vehicle configuration and installed accessories, so the applicable local rules should always be checked.
Frequently Asked Questions – Nissan Primastar & NV300 Camper Kit
Does the Nissan Primastar & NV300 Camper Kit require homologation?
In a removable-use configuration, the Nissan Primastar and NV300 camper kit is normally treated as correctly secured cargo rather than a fixed vehicle conversion, so it generally does not require homologation. The furniture must always be correctly positioned and secured while travelling. Requirements can vary by country, vehicle configuration and installed accessories, so local transport and technical-inspection rules should be checked.
Which Nissan Primastar and NV300 versions are compatible with the camper kit?
The camper kit can be manufactured for compatible Nissan Primastar 2002–2014 models, Nissan NV300 2016–2021 models and current Nissan Primastar versions from 2021. Compatibility must be confirmed according to the exact model year, L1 or L2 body length, passenger or cargo configuration, number and position of seats, wheel-arch trim, rear air conditioning and available anchoring points.
What are the bed and furniture dimensions of the Nissan Primastar & NV300 Camper Kit?
The bed is approximately 185–190 cm long and around 152–155 cm wide, depending on the vehicle and selected layout. The furniture is approximately 152 cm wide without the mattress pack, around 155 cm with the mattress pack and approximately 120 cm deep. Installation height is normally around 55 cm with compatible folded rear seats or 40–44 cm without rear seats.
Can I keep the passenger seats and use the van every day?
Yes. In compatible passenger configurations, selected rear seats can remain usable when the camper furniture and mattress pack are folded into the rear area. The number of usable seats depends on the body length, seat layout, anchoring system and final furniture configuration, so the exact arrangement must be checked before manufacturing.
Which materials are available for the Nissan Primastar & NV300 camper furniture kit?
The kit is available in three 15 mm plywood options: lightweight natural poplar plywood, waterproof natural wood phenolic plywood and Coachbuilder HPL phenolic plywood, which provides the most durable and easiest-to-clean finish. Every option includes the made-to-measure New Design dark grey mattress pack.
Which accessories can be added to the Nissan Primastar & NV300 Camper Kit?
Compatible accessories include a Coolzone 35L compressor fridge with a made-to-measure compartment or sliding support, foldable sink, portable 12V shower with 20L water tank, 9-layer thermal blackout covers, custom Campingaz-style stove, auxiliary battery system, independent sink cabinet and 2+1 modular configuration when the vehicle layout permits it. Compatibility and available storage space must be confirmed before manufacturing.
Customer Reviews – Nissan Primastar & NV300 Camper Furniture Kits
4.9/5 Rating Based on 51 Customer Reviews
Kit Mueble Camper has an average rating of 4.9 out of 5 based on 51 customer reviews.
Customers value the quality and durability of our removable camper furniture, the comfort of the New Design mattress pack, the practical storage layouts, the personalised compatibility advice and the possibility of receiving the kit assembled and protected through palletised delivery.
These reviews relate to our camper furniture kits, accessories, customer service and work carried out for different vehicle models in Spain, France and other European countries.
Read Customer Reviews and View Our Locations
🇪🇸 Madrid – Arganda del Rey
https://maps.app.goo.gl/YR3S8WCe1pqdb1Xb7
🇪🇸 Barcelona – Tordera
https://maps.app.goo.gl/bHjBo51GtmkenoCa7
🇪🇸 Seville – Écija
https://maps.app.goo.gl/13MZuMieqKebSP9w6
🇫🇷 France – Narbonne / Argeliers
https://maps.app.goo.gl/6HwG9uanwFepyD6cA
Buy Your Nissan Primastar & NV300 Camper Furniture Kit
Order Online or Contact Us for a Configuration Adapted to Your Van
Transform your Nissan Primastar or NV300 with a removable, self-install camper furniture kit featuring a folding bed, made-to-measure New Design dark grey mattress pack, rear kitchen drawer, multi-height table and practical storage.
Before manufacturing, we confirm:
✅ Model year and vehicle generation.
✅ L1 or L2 body length.
✅ Passenger or cargo configuration.
✅ Number and position of seats you want to retain.
✅ Wheel-arch trim and rear air-conditioning equipment.
✅ Preferred material, furniture height and accessories.
👉 Buy the Nissan Primastar & NV300 Camper Furniture Kit with Mattress Pack Included:
👉 Contact us on WhatsApp for compatibility advice and personalised ordering assistance:
Thank God for Every Customer and Every New Journey
We give thanks and glory to God for allowing us to continue working, improving our camper furniture and helping more people prepare their vehicles for travel, camping and new experiences.
We are also sincerely grateful to every customer who places their trust in Kit Mueble Camper, recommends our work and allows our furniture to become part of their journeys.
May God guide and protect every road, every family and every traveller.
Thanks be to God for everything.