Fiat Talento CamperBox – Custom Removable Camper Furniture Kit

Fiat Talento Camper Conversion Kit for L1 and L2 Vans

Removable Camper Box with a 185–190 × 152–155 cm Bed, New Design Mattress Pack, Rear Kitchen and Modular Storage

Transform your Fiat Talento into a practical camper van with a removable, self-install camper furniture kit designed for camping, travel and everyday vehicle use.

The modular system is available for compatible Fiat Talento L1 and L2 passenger, crew and cargo configurations. Before manufacturing, we confirm the exact model year, body length, seat arrangement, wheel-arch trim, rear air-conditioning equipment and available anchoring points.

The Fiat Talento Camper Kit can include:

✅ A folding camper bed approximately 185–190 cm long and 152–155 cm wide, depending on the vehicle and selected layout.

✅ A made-to-measure New Design dark grey mattress pack, included with every available furniture material.

✅ A rear pull-out kitchen drawer prepared for a compatible Campingaz-style stove.

✅ A multi-height table for indoor dining and lounge modes that can also be used outside the van.

✅ Several storage trunks and compartments for food, clothes, water, cooking equipment or a portable WC.

✅ Compatible side storage modules positioned over the wheel-arch areas, helping extend the sleeping surface across the rear interior.

✅ A dedicated compartment or sliding support for the recommended Coolzone 35L compressor fridge, when permitted by the selected layout.

✅ A compact folding structure adapted to compatible configurations with or without rear seats.

When folded, the Fiat Talento Camper Box remains within the rear area, helping the van stay practical for work, passenger transport and everyday driving.

In compatible passenger layouts, selected rear seats can remain usable. The exact seating capacity depends on the L1 or L2 body, original seat arrangement and chosen camper furniture configuration.

In a removable-use configuration, the system is normally treated as correctly secured cargo rather than a permanently installed conversion. It must always be properly secured while travelling, and local requirements should be checked according to the country, vehicle and accessories installed.

👉 Buy the Fiat Talento Camper Furniture Kit with New Design mattress pack included:

https://www.kitmueblecamper.com/p/fiat-talento-camper-camper-furniture-kit-with-mattress-pack-included/ 

Fiat Talento Camper Box Compatibility for L1 and L2 Vans

Custom-Made Removable Camper Furniture Kit for Standard and Long Versions

At Kit Muebles Camper, we specialize in designing custom-made removable camper furniture kits adapted to the dimensions and interior configuration of each vehicle.

Our Fiat Talento Camper Box is designed for compatible Fiat Talento vans from the modern model series introduced in 2016. This modular camper conversion can be adapted to the two main Fiat Talento body lengths:

✅ Standard or L1 Fiat Talento, offering a practical balance between everyday vehicle use, sleeping space and storage capacity.

✅ Long or L2 Fiat Talento, providing additional rear depth and greater flexibility for retaining seats, increasing storage or adding compatible camper accessories.

The removable furniture system can be prepared for compatible passenger, crew and cargo configurations. However, the available space and final layout may vary depending on the original seats, wheel-arch covers, rear air-conditioning equipment, floor finish and available anchoring points.

Before manufacturing your Fiat Talento camper furniture kit, we confirm:

✅ The exact model year.

✅ The Standard/L1 or Long/L2 body length.

✅ The passenger, crew or cargo configuration.

✅ The number and position of the seats you want to retain.

✅ Whether the wheel arches are exposed or covered with interior trim.

✅ Any rear air-conditioning system or other equipment affecting the available space.

The Fiat Talento shares its basic vehicle architecture with closely related medium vans such as the Renault Trafic and Nissan NV300. This allows us to use a proven modular camper furniture concept, although the measurements, interior trim and support points are always checked specifically for each Fiat Talento.

Once the vehicle details have been confirmed, the removable Fiat Talento Camper Box is manufactured to provide a secure fit, practical folding system and efficient use of the available rear space.

The result is a versatile Fiat Talento camper conversion kit designed for travel, camping and everyday use, while keeping the van practical for work, passengers or general transport.

Fiat Talento Camper Conversion Kit – Removable, Modular and Self-Install

Camper Furniture for Compatible Seat Layouts, L1/L2 Vans and Everyday Use

The Fiat Talento camper conversion kit is designed to transform a compatible L1 or L2 van into a practical camper without permanently modifying the main furniture system.

Its modular, removable design allows the Fiat Talento Camper Box to be installed for camping and removed when the vehicle is needed for work, passenger transport or general everyday use.

Compatible configurations can retain selected original seats while the camper furniture remains folded within the rear area. Depending on the body length, original seat arrangement and chosen furniture layout, the kit can be prepared for 2, 3, 5 or 6-seat configurations.

In some compatible Fiat Talento L2 layouts, more of the original seating configuration can be retained due to the additional rear length. The exact number of usable seats must always be confirmed before manufacturing according to the vehicle and selected camper setup.

In a removable-use configuration, the furniture system is normally treated as correctly secured cargo rather than a permanently installed conversion. Homologation is therefore generally not required for the removable furniture itself, although the system must always be properly secured during travel and local requirements should be checked according to the country, vehicle and accessories installed.

When folded, the removable Fiat Talento camper furniture kit remains compactly stored within the rear area together with its made-to-measure mattress sections.

In compatible configurations, the original load cover or parcel shelf can also remain usable, helping preserve rear visibility, interior organization and discretion from outside the van.

This makes the Fiat Talento camper kit a practical solution for customers who want a comfortable bed, rear kitchen, table and storage system without giving up the van's normal daily function.

Fiat Talento Camper Box Materials and Premium Plywood Finishes

Every material option includes a made-to-measure New Design dark grey mattress pack. The final price depends on the selected plywood, body length, seat configuration, wheel-arch finish and optional accessories.

The online store currently displays configurations starting from €875, excluding shipping. Updated prices and available combinations are shown directly in the product selector.

Natural Poplar Plywood – Lightweight and Moisture-Resistant

Natural poplar plywood is the lightest furniture material available for the Fiat Talento Camper Box. Its pale, almost white appearance and subtle natural grain create a bright, clean interior.

✅ Thickness: 15 mm.

✅ Lightweight and easier to handle than denser plywood options.

✅ Hydrofuge treatment offering strong resistance to humidity and condensation.

✅ Flexible and resistant to cracking or splintering under normal camper use.

✅ Recommended when reducing furniture weight is the main priority.

Poplar is softer than phenolic or HPL-faced plywood, so concentrated pressure from keys, tools or sharp objects can leave small surface marks. It is moisture-resistant but should not be described as completely waterproof.

Natural Phenolic Plywood – Rustic Finish and High Water Resistance

Natural phenolic plywood offers a warmer, medium-toned wood appearance with visible grain, making it suitable for customers who prefer a rustic, cabin-style camper interior.

✅ Thickness: 15 mm.

✅ Denser and more impact-resistant than natural poplar plywood.

✅ Phenolic bonding between the plywood layers provides strong resistance to moisture and water exposure.

✅ Good structural durability for frequent travel and regular camper use.

✅ Natural finish that combines well with the New Design dark grey mattress pack.

Its surface is slightly more porous than an HPL-coated panel. As with any cut plywood component, exposed edges and machining points should be cared for properly to maintain long-term resistance.

HPL-Faced Phenolic Plywood – Dark Premium and Easy-Clean Finish

HPL-faced phenolic plywood is the most durable and premium finish available for intensive camper use. It has a very dark brown, almost black appearance that blends well with modern van interiors.

✅ Thickness: 15 mm.

✅ Durable HPL outer surface with high resistance to wear and everyday marking.

✅ Strong protection against humidity, condensation and accidental spills.

✅ Low-adherence surface that is easy to clean and maintain.

✅ Recommended for frequent travellers, professional use and customers prioritizing maximum durability.

This material is heavier than natural poplar plywood, but it remains suitable for a removable camper furniture system when the complete module is handled and secured correctly.

👉 Check current Fiat Talento materials, configurations and prices:

https://www.kitmueblecamper.com/p/fiat-talento-camper-camper-furniture-kit-with-mattress-pack-included/ 

Fiat Talento Camper Furniture Kit Features and Modular Storage

Rear Kitchen Drawer, Multi-Height Table, Coolzone 35L Fridge Space and Hidden Storage

The Fiat Talento camper furniture kit combines a rear kitchen, multi-height table and several storage compartments within a compact, removable module designed for travel, camping and everyday van use.

The exact number, dimensions and position of the compartments may vary according to the L1 or L2 body, seats retained, wheel-arch trim, fridge position and selected furniture configuration.

Rear Kitchen Drawer for a Compatible Campingaz-Style Stove

The rear section of the Fiat Talento Camper Box includes a custom pull-out kitchen drawer prepared for a compatible Campingaz-style stove.

A single-burner stove is normally the most space-efficient option. A larger or dual-burner model can be studied when the available drawer dimensions and selected layout allow it.

Behind the kitchen drawer, an independent storage chest with a top-opening lid provides practical space for:

✅ Cookware, plates and cutlery.

✅ Food and pantry supplies.

✅ Gas cartridges and cooking accessories, stored according to the manufacturer's safety instructions.

✅ Other compact camping equipment.

This rear-access design allows the kitchen to be prepared from outside the van while keeping the main interior area organized.

Multi-Height Table for Indoor and Outdoor Use

At the centre of the camper furniture, a multi-height removable table can be used both inside and outside the Fiat Talento.

Inside the van, the table can be configured for:

✅ Dining mode, creating a practical area for eating, working or preparing food.

✅ Lounge mode, offering a lower and more relaxed position for resting inside the van.

✅ Access to compatible storage compartments without completely dismantling the camper setup.

Outside the vehicle, the same tabletop and support can be used as a practical camping table, reducing the amount of separate equipment that needs to be transported.

A dedicated internal compartment keeps the table leg and compatible bed supports secured when they are not in use, helping prevent movement or rattling while travelling.

Storage Compartments for Fridge, Shower and Camping Equipment

Behind the table, another top-access storage trunk provides additional capacity for clothes, bedding, food or general camping equipment.

Depending on the selected Fiat Talento layout, the left side can include two modular storage compartments with top or front access:

✅ A rear compartment prepared for a compatible Coolzone 35L compressor fridge or general storage.

✅ A front compartment suitable for a portable 12V shower, a 20L water container or other travel accessories.

In a typical compatible configuration, the rear furniture can combine two top-access trunks with several front-access compartments. Optional side modules positioned over exposed wheel arches can add two further storage areas while helping extend the sleeping surface across the van.

The precise compartment layout is confirmed before manufacturing according to the interior trim and customer requirements.

Coolzone 35L Compressor Fridge and Optional Sliding Support

For the Fiat Talento camper conversion kit, we normally recommend the Coolzone 35L compressor fridge because its dimensions suit many of the available furniture configurations.

Depending on the selected layout, the fridge can be positioned:

✅ Inside a rear top-access storage compartment.

✅ On an optional front sliding support for quicker access from the side or rear area.

The sliding fridge support requires sufficient clearance, ventilation and structural space. It may also affect the final furniture layout and price, so compatibility must be confirmed before manufacturing.

The fridge and its electrical supply should be selected according to the available space, auxiliary battery system and expected travel use. If no fridge is installed, the prepared compartment can remain available as a large storage trunk.

Fiat Talento Camper Box Storage Design and Interior Layout

Dual-Access Trunks, Wheel-Arch Modules and Space for a Shower, Portable Toilet and Camping Equipment

The Fiat Talento Camper Box is designed to use the available rear space efficiently while keeping cooking equipment, water, clothing and travel accessories organized.

The exact arrangement depends on the L1 or L2 body, original seats, wheel-arch trim, rear air-conditioning system, fridge position and selected camper furniture configuration.

Left-Side Dual-Access Storage Module

When the available layout permits it, we recommend configuring the left-side storage trunk with both top and front access.

This dual-access design makes the compartment easier to use in different camper modes:

✅ The top opening provides convenient access when the bed is folded or partially prepared.

✅ The front opening allows access when the sleeping platform or mattress pack is positioned above the trunk.

Depending on the selected configuration, this compartment can be used for:

✅ A portable 12V outdoor shower with a compatible water container.

✅ A portable toilet or Potti.

✅ Camping equipment, clothing or general travel accessories.

✅ Additional food, kitchenware or water storage.

A practical option is to store the portable toilet inside the central table compartment while travelling. Once the camper furniture is unfolded, it can be moved temporarily to the front area of the van, leaving the left trunk available for the shower tank, water container or other equipment.

The final storage position must always be selected according to the available dimensions and safe weight distribution.

Wheel-Arch Side Modules and Full-Width Bed Surface

In compatible Fiat Talento configurations with exposed wheel arches, removable side modules can be added over these areas.

These modules help extend the sleeping platform towards the interior walls while creating additional top-access storage compartments.

They can be used for:

✅ Bedding, pillows and blankets.

✅ Clean or used clothing.

✅ Small camping accessories.

✅ Equipment that should remain separate from the main kitchen and food-storage areas.

The wheel-arch modules are adapted to the interior trim of the vehicle. If the van has plastic wheel-arch covers, rear air conditioning or other equipment occupying this space, the dimensions and side extensions must be adjusted before manufacturing.

Optional Double-Drawer Layout

A double-drawer configuration can be studied for customers who prefer separate pull-out compartments.

Although this option can look attractive and provide organized access, it also introduces additional wood panels, rails and mechanical components inside the available storage volume.

Compared with a larger single compartment, a double-drawer layout may:

✅ Reduce the total usable storage capacity.

✅ Add weight to the furniture module.

✅ Require more clearance for full drawer extension.

✅ Increase long-term mechanical stress on the slides.

For this reason, we normally recommend prioritizing open trunks and dual-access compartments. When a double-drawer layout is selected, reinforced full-extension slides rated at approximately 30–40 kg can be used according to the drawer size and intended load.

Availability and any possible price difference must be confirmed before manufacturing.

Durable Construction and Interior Finish

Every Fiat Talento camper furniture kit is designed to combine structural strength, compact dimensions and visual harmony with the van interior.

The natural poplar, natural phenolic and dark HPL finishes can all be combined with the made-to-measure New Design dark grey mattress pack.

Rather than prioritizing appearance alone, the furniture is manufactured for repeated folding, storage access and regular travel use. Correct loading, secure installation and appropriate care of the plywood surfaces and hardware will help maintain the kit's strength and appearance over time.

Fiat Talento Camper Kit Dimensions and New Design Mattress Pack

Approximately 185–190 × 152–155 cm Bed with Modular Dining, Lounge and Sleeping Sections

The dimensions of the Fiat Talento camper kit vary according to the body length, seats retained, interior trim, wheel arches and selected furniture configuration.

As a general reference:

✅ Furniture width: approximately 152 cm without the mattress pack or final side adjustment.

✅ Sleeping width: approximately 155 cm with the made-to-measure mattress pack in compatible layouts with exposed wheel arches and side modules.

✅ Main furniture depth: approximately 120 cm, depending on the configuration.

✅ Bed length: approximately 185–190 cm.

These measurements are approximate and must be confirmed for the exact Fiat Talento before manufacturing.

Vehicles equipped with plastic wheel-arch covers, rear air conditioning or other interior elements may require a different width or removable side extensions to adapt the bed surface correctly.

The included New Design mattress pack is made to measure for the selected Fiat Talento camper furniture configuration. It is divided into modular sections that allow the interior to be changed between:

✅ Full sleeping mode.

✅ Dining mode with access to the central table.

✅ Lounge or semi-reclined mode.

✅ Partially folded mode for quicker access to storage compartments.

The modular sections make it possible to open selected trunks without removing the entire mattress pack. Each piece is cut according to the furniture dimensions so the sections join closely and create a comfortable, even sleeping surface.

The exact mattress shape, number of sections and final dimensions are confirmed according to the L1 or L2 body and selected camper layout.

Fiat Talento Camper Box Structure, Stability and Load Distribution

Two-Part Folding Bed Support with Approximately 55 cm Seat-Level or 40–44 cm Low-Profile Height

The Fiat Talento Camper Box uses a compact two-part folding structure designed to distribute the sleeping load across the rear furniture module and the compatible front support area.

The precise support system depends on the L1 or L2 body, original seats retained, furniture height and selected camper configuration.

Integrated Storage for Table Leg and Bed Supports

Compatible Fiat Talento camper furniture layouts include a dedicated internal compartment for storing the table leg and removable or folding bed supports.

When the module is folded for travel, these components remain collected inside the furniture rather than loose in the rear area. This helps:

✅ Keep the camper equipment organized.

✅ Reduce unwanted movement and rattling while driving.

✅ Protect the support components from impacts.

✅ Make the transition between driving and sleeping modes quicker and easier.

All removable components must be correctly placed in their designated storage position before travelling.

Two-Part Folding Bed and Weight Distribution System

When unfolded, the Fiat Talento camper furniture kit distributes the sleeping load across two main support sections:

✅ Main rear furniture module: the largest and most stable section, positioned on the rear cargo floor and forming the base of the camper system.

✅ Front fold-out bed platform: extends the sleeping surface towards the passenger area and rests on compatible folded seats or on a dedicated folding or removable support-leg system.

In configurations that retain suitable rear seats, the height of the furniture can be aligned with the folded seat level. The seat area then forms part of the support arrangement without requiring a permanent installation.

When the rear seats are removed, the fold-out platform is supported by the furniture structure and compatible legs positioned according to the selected layout.

This two-part design helps distribute the load across a wider area and avoids concentrating the sleeping weight at a single point.

Fiat Talento Camper Kit Height with or without Rear Seats

The build height of the Fiat Talento camper kit can be adapted according to the seats retained and the available interior space.

As a general reference:

✅ With compatible folded rear seats: approximately 55 cm high, aligning the bed platform with the seat level in selected passenger or crew configurations.

✅ Without rear seats: approximately 40–44 cm high, creating a lower sleeping platform and increasing the usable vertical space inside the van.

The lower configuration can also provide easier access to the bed and a more open interior. The higher seat-level version can offer additional storage volume beneath the sleeping platform.

The final height must be confirmed according to the seat design, floor level, wheel arches and support points of the specific Fiat Talento.

Secure Travel Position and Protection of the Vehicle Interior

When used correctly, the structure is designed to provide a stable and balanced sleeping platform while avoiding concentrated pressure on the original seats and interior trim.

The furniture must always be correctly positioned and secured to suitable vehicle anchoring or tie-down points before travelling. Heavy equipment should be distributed evenly and stored inside closed compartments whenever possible.

Selected seats can remain usable in compatible Fiat Talento configurations, but the exact number depends on the body length, original seating arrangement and chosen camper furniture layout.

The system should not be overloaded or used with unsupported extensions. Correct installation, appropriate load distribution and regular inspection of hinges, supports and fittings help preserve both the camper furniture and the vehicle interior.

All available material finishes include the made-to-measure New Design dark grey mattress pack.

👉 View Fiat Talento Camper Box materials, configurations and current prices:

https://www.kitmueblecamper.com/p/fiat-talento-camper-camper-furniture-kit-with-mattress-pack-included/ 

Available Configurations and Compatible Accessories for the Fiat Talento Camper Box

Add Practical Equipment to Your Fiat Talento Camper Conversion Kit

The Fiat Talento Camper Box can be combined with practical accessories and modular configurations designed to improve comfort, storage and autonomy during your trips.

Accessory compatibility may depend on the selected camper furniture layout, available storage compartments and electrical configuration of the vehicle. Contact us if you would like us to check and prepare the complete setup before ordering.

Folding Sink and 12V Outdoor Shower with 20L Water Container

Add a compact folding sink and a 12V outdoor shower with a 20-litre water container to your Fiat Talento camper conversion.

This practical combination can be used for washing dishes, cleaning camping equipment or showering outdoors. Both accessories are compact and can be stored inside compatible compartments of the camper furniture.

👉 View the folding camper sink:

https://www.kitmueblecamper.com/p/foldable-camper-sink-with-drain-plug-compact-and-practical-for-camper-furniture/ 

👉 View the 12V outdoor shower with 20L water container:

https://www.kitmueblecamper.com/p/ducha-exterior-12v-20l/ 

Custom Campingaz-Style Kitchen Drawer

The rear pull-out kitchen drawer can accommodate a compatible Campingaz-style single-burner stove, creating a practical outdoor cooking area without taking up additional space inside the van.

The stove can be stored securely inside the camper module when it is not being used. Always cook outside the vehicle or in a suitably ventilated area, following the stove manufacturer's safety instructions.

👉 View the custom Campingaz-style stove:

https://www.kitmueblecamper.com/p/custom-campingaz-1-burner-stove-for-our-camper-furniture/ 

Optional Sliding Fridge Support

The Fiat Talento Camper Box can be prepared with an optional sliding fridge support, allowing easier access to a compatible compressor fridge.

Depending on the chosen furniture configuration, additional folding brackets or supports can also be incorporated to improve stability and adapt the camper furniture to the vehicle's seat layout.

👉 View the fridge drawer and folding-support supplement:

https://www.kitmueblecamper.com/p/suplemento-adiocinal-por-bandeja-de-nevera-o-modalidad-2-1/ 

Coolzone 35L Compressor Fridge

For the best balance between storage capacity, size and energy efficiency, we recommend the Coolzone 35L compressor fridge.

Its dimensions are compatible with the dedicated fridge compartment or optional sliding support available for selected Fiat Talento camper furniture configurations.

The fridge can operate from a suitable 12V electrical supply, making it practical for weekend trips and longer camper journeys.

👉 View the Coolzone 35L compressor fridge:

https://www.kitmueblecamper.com/p/coolzone-35l-compressor-fridge-lg-compressor-recommended-for-our-camper-furniture-kits/ 

Nine-Layer Thermal Blackout Covers

Improve privacy, temperature control and sleeping comfort with nine-layer thermal blackout covers made for camper vans.

These insulated covers help reduce incoming light and limit heat transfer through the windows. The correct set is selected according to the Fiat Talento body and window configuration.

👉 View the nine-layer thermal blackout covers:

https://www.kitmueblecamper.com/p/blackout-shades-thermal-insulation-for-camper-vans1/ 

2+1 Modular Camper Furniture Configuration

The 2+1 modular configuration provides additional flexibility when adapting the Fiat Talento Camper Kit to compatible individual and double rear-seat layouts.

The exact seating capacity and furniture arrangement depend on the original vehicle configuration, body length and seats that you want to keep available.

👉 View the 2+1 modular configuration:

https://www.kitmueblecamper.com/p/en-modalidad-2-1/ 

Auxiliary Battery and Inverter System

An auxiliary battery system can provide independent power for compatible equipment such as the compressor fridge, 12V shower, interior lighting or USB devices.

Different configurations are available with or without an inverter. The electrical system must be correctly sized and installed according to the vehicle and the equipment that will be connected.

👉 View auxiliary battery and inverter options:

https://www.kitmueblecamper.com/p/bateria-auxilar-camper/ 

Independent California-Style Sink Module

The independent sink and kitchen module provides a more complete water and storage area inspired by classic California-style camper layouts.

Depending on the selected configuration, it can include clean and grey water containers, a compact sink, a 12V faucet and dedicated storage compartments.

The module remains removable and can be combined with compatible versions of the Fiat Talento Camper Box.

👉 View the independent sink and kitchen module:

https://www.kitmueblecamper.com/p/mueble-fregadero-cocina-combinable-kits/ 

In the header video, you can see practical examples of many of these accessories and camper furniture configurations.

Accessories can be added separately through our online store. If you would like a complete setup, contact us via WhatsApp before ordering and tell us the year, body length, seat arrangement and equipment of your Fiat Talento.

We will help you select the camper furniture configuration and compatible accessories for your vehicle.

👉 Buy the Fiat Talento Camper Box with New Design mattress pack included:

https://www.kitmueblecamper.com/p/fiat-talento-camper-camper-furniture-kit-with-mattress-pack-included/ 

👉 Contact us via WhatsApp:

https://wa.me/34653871812 

Fiat Talento Camper Kit Installation: Quick Assembly, Secure Fastening and Everyday Use

Convert Your Fiat Talento Without Permanent Modifications and Keep the Camper Box Folded Inside the Luggage Area

Quick Installation: Removable and Reversible Self-Install System

The Fiat Talento Camper Furniture Kit is designed to be installed and removed in just a few minutes, without drilling or making permanent modifications to the vehicle.

This removable system allows you to alternate easily between everyday use for work or family transport and a complete camper setup for travelling, camping and weekend trips.

Secure Fastening While Travelling

The camper furniture must be secured correctly using the fastening solution selected according to the vehicle version and available anchoring points.

Dedicated compartments inside the rear module keep the bed supports and table leg securely stored while travelling, preventing movement and helping maintain a tidy, quiet luggage area.

Before driving, always check that the module, mattresses, table, supports and accessories are properly secured.

Everyday Use with the Camper Box Folded in the Luggage Area

When not in use, the Fiat Talento Camper Box folds compactly inside the rear luggage area.

The made-to-measure New Design dark grey mattress pack can be stored within the folded furniture system, keeping the interior organized and allowing quick access to the camper equipment when you arrive at your destination.

In compatible configurations, the original parcel shelf or luggage cover can remain in place, helping preserve rear visibility and keeping the camper equipment discreetly concealed from outside the vehicle.

Camper Furniture Height with or Without Rear Seats

The height and supporting structure of the Fiat Talento Camper Kit can be adapted to the seats you want to retain:

✅ With folded rear seats: the fold-out sleeping platform rests securely on the folded seats, which remain protected beneath the structure. Depending on the interior configuration, the furniture is normally built at approximately 55 cm high.

✅ Without rear seats: the camper module can normally be manufactured at approximately 40–44 cm high, providing additional usable interior space. The sleeping extension is supported by the main structure and a folding leg system.

The exact height is confirmed before manufacturing according to the original seats, interior trim and intended use of the vehicle.

Detailed Fiat Talento L1 and L2 Compatibility Check

To ensure that the removable camper furniture fits your Fiat Talento correctly, we confirm:

✅ Model year and vehicle version. The Fiat Talento generation was sold from 2016 until approximately 2021, depending on the country and market.

✅ Standard L1 or Long L2 body length.

✅ Cargo, Combi or passenger configuration.

✅ Number, position and folding system of the seats you want to retain.

✅ Exposed wheel arches or plastic wheel-arch covers.

✅ Rear air-conditioning equipment and other interior fittings.

✅ Available anchoring points and preferred camper furniture height.

Send us photographs of the luggage area together with the model year, body length and seating configuration, and we will confirm the correct version before manufacturing.

👉 Check the compatibility of your Fiat Talento via WhatsApp:

https://wa.me/34653871812 

Frequently Asked Questions About the Fiat Talento Camper Kit

Installation, Seats, Bed Dimensions, Materials and Compatible Accessories

Does the Fiat Talento camper box require homologation?

The Fiat Talento Camper Box is designed as removable, self-install camper furniture without drilling or permanent vehicle modifications. In a removable-use configuration, the system is normally treated as correctly secured cargo rather than a fixed conversion.

It must always be properly secured while travelling. Requirements can vary according to the country, vehicle configuration and accessories installed, so local regulations should be checked before travelling or attending a technical inspection.

Can I keep the seats when installing the Fiat Talento Camper Kit?

Yes. Depending on the original vehicle layout and selected furniture configuration, the kit can be adapted to retain 2, 3, 5 or 6 usable seats.

Compatible L2 configurations can retain additional rear seating while the camper furniture remains folded inside the luggage area. The exact seating capacity must be confirmed before manufacturing.

What are the bed dimensions of the Fiat Talento Camper Kit?

The unfolded bed is approximately 185–190 cm long and 152–155 cm wide, depending on the body length, interior trim, visible wheel arches, rear air-conditioning equipment and selected configuration.

Every furniture material includes a made-to-measure New Design dark grey mattress pack.

What materials are available for the Fiat Talento camper furniture?

The Fiat Talento Camper Furniture Kit is available in lightweight poplar plywood, natural phenolic plywood and dark HPL phenolic plywood.

All options use 15 mm plywood and provide different combinations of weight, appearance, water resistance, surface durability and ease of cleaning.

What accessories can be added to the Fiat Talento camper kit?

Compatible options include a folding sink, 12V outdoor shower with 20L water container, Campingaz-style stove, Coolzone 35L compressor fridge, sliding fridge support, nine-layer thermal blackout covers, 2+1 furniture configuration, auxiliary battery and inverter system, and an independent California-style sink module.

Compatibility depends on the selected furniture layout and the equipment already installed in the vehicle.

Fiat Talento Camper Kit Customer Reviews

Rated 4.9 out of 5 Based on 51 Google Customer Reviews

Customers value the quality, functionality and made-to-measure fit of our removable camper furniture, together with the personalized assistance provided before manufacturing and installation.

You can read customer reviews from our different locations on Google:

🇪🇸 Madrid – Arganda del Rey

https://maps.app.goo.gl/YR3S8WCe1pqdb1Xb7 

🇪🇸 Barcelona – Tordera

https://maps.app.goo.gl/bHjBo51GtmkenoCa7 

🇪🇸 Seville – Écija

https://maps.app.goo.gl/13MZuMieqKebSP9w6 

🇫🇷 France – Narbonne / Argeliers Area

https://maps.app.goo.gl/6HwG9uanwFepyD6cA 

Buy Your Fiat Talento Camper Box with Mattress Pack Included

Order a Custom Removable Camper Furniture Kit for Your Fiat Talento L1 or L2

Transform your Fiat Talento into a comfortable and functional camper van with a custom removable Camper Box designed for travel, camping and everyday vehicle use.

Choose the material, furniture height, seating configuration and compatible accessories that best suit your vehicle.

Every furniture material includes the made-to-measure New Design dark grey mattress pack, folding bed, rear kitchen area, multi-height table and modular storage system.

👉 Buy the Fiat Talento Camper Box with New Design mattress pack included:

https://www.kitmueblecamper.com/p/fiat-talento-camper-camper-furniture-kit-with-mattress-pack-included/ 

👉 Contact us via WhatsApp to confirm compatibility or prepare your complete camper setup:

https://wa.me/34653871812 

"I can do all things through Christ who strengthens me." — Philippians 4:13

Thanks be to God.