Cart
0
0.00 €
Citroën SpaceTourer Camper Furniture Kit – Removable Camper Conversion
Removable, self-install camper furniture for compatible Citroën SpaceTourer XS, M and XL passenger vans, with a 185–190 cm bed, New Design mattress pack, rear kitchen, multi-height table, modular storage and Coolzone 35L fridge compatibility.
Citroën SpaceTourer Camper Conversion Kit for XS, M and XL Passenger Vans
Removable Camper Box with a 185–190 cm Bed, New Design Mattress Pack, Rear Kitchen and Modular Storage
Transform your Citroën SpaceTourer into a practical camper van with a removable camper conversion kit designed for travel, camping and everyday passenger use.
The Citroën SpaceTourer camper furniture kit is available for compatible XS, M and XL passenger configurations. Before manufacturing, we confirm the exact model year, body length, seat arrangement, rail system, wheel-arch trim, rear air-conditioning equipment and available anchoring points.
The Citroën SpaceTourer Camper Box can include:
✅ A folding camper bed approximately 185–190 cm long, with the sleeping width adapted to the confirmed interior trim, mattress configuration and side modules.
✅ A made-to-measure New Design dark grey mattress pack, included with every available furniture material.
✅ A rear pull-out kitchen drawer prepared for a compatible Campingaz-style stove.
✅ A multi-height table that can be used inside the SpaceTourer in dining or lounge mode and outside the vehicle when camping.
✅ Several modular storage trunks and compartments for food, clothing, water, kitchen equipment, camping accessories or a portable toilet.
✅ Side storage modules covering compatible wheel-arch areas, extending the sleeping surface and providing additional top-access storage.
✅ A dedicated compartment or sliding support for the recommended Coolzone 35L compressor fridge.
✅ A compact two-part folding bed structure adapted to compatible configurations with folded rear seats or dedicated folding supports when the seats are removed.
When folded, the removable Citroën SpaceTourer camper kit remains inside the rear luggage area together with the New Design mattress pack. This helps preserve the vehicle's everyday practicality for family transport, passenger use and daily driving.
In compatible passenger configurations, selected original seats can remain installed and usable. The exact number of available seats depends on the XS, M or XL body length, original seat arrangement, rail system and selected camper furniture layout.
The camper furniture is designed without drilling or permanent structural modifications. In a removable-use configuration, it is normally treated as securely fastened cargo rather than a fixed conversion. It must always be properly secured while travelling, and the applicable requirements should be checked according to the country, vehicle and accessories installed.
👉 Buy the Citroën SpaceTourer camper furniture kit with New Design mattress pack included:
Citroën SpaceTourer Camper Box – Removable Camper Kit with Mattress Pack Included
Citroën SpaceTourer Camper Box-Removable Camper Kit with Mattress Pack -Special Offer 750€
Custom Citroën SpaceTourer Camper Furniture Kit for Every Compatible Model Year
Removable Camper Box for XS, M and XL/L Versions with Flexible Seat Configurations
The Citroën SpaceTourer camper furniture kit is a custom-built, modular solution designed to transform compatible passenger versions into practical camper vans without drilling or making permanent structural modifications.
The furniture can be adapted to Citroën SpaceTourer vehicles manufactured from 2016 onwards, including earlier XS, M and XL versions and the updated model currently offered in M and long L/XL body lengths.
Citroën SpaceTourer Model Years and Body Lengths
The Citroën SpaceTourer was introduced in 2016 on the modular EMP2 platform. For camper furniture compatibility, it is clearer to distinguish between two principal design periods rather than describe them as completely separate vehicle generations:
Original Citroën SpaceTourer design, approximately 2016–2023: offered in XS, M and XL body lengths, depending on model year, market and powertrain.
Updated Citroën SpaceTourer, 2024–present: facelifted exterior and interior design, currently offered primarily in M and long L/XL body lengths, depending on the country.
Typical exterior lengths are:
Earlier XS: approximately 4.60 m.
Earlier M: approximately 4.95 m.
Earlier XL: approximately 5.30 m.
Current M: approximately 4.98 m.
Current L/XL: approximately 5.33 m.
Camper Furniture Kit Available for Existing SpaceTourer XS Vans
Although the compact Citroën SpaceTourer XS is no longer part of the current model range in many European markets, we can still manufacture a made-to-measure camper furniture kit for compatible existing XS vehicles.
The shorter luggage area requires a more carefully optimized furniture and folding-bed configuration. The exact bed length, seat retention and compartment distribution must therefore be confirmed according to the vehicle year, original seat arrangement and available rear depth.
The XS version was still listed in Citroën documentation during 2022, so availability may vary according to the country, registration year and remaining dealer stock. For this reason, we describe it as an earlier discontinued body length rather than assigning one universal discontinuation date.
Compatibility with Diesel and Electric SpaceTourer Versions
The camper furniture can be adapted to compatible diesel SpaceTourer and electric ë-SpaceTourer passenger versions.
Before manufacturing, we confirm the powertrain, model year, body length and interior configuration because the floor, seat rails, rear trim, air-conditioning equipment and available anchoring points can vary.
Flexible Passenger-Seat Configurations
Depending on the vehicle and selected camper box layout, compatible configurations can retain 2, 3, 5 or 6 usable seats while the furniture remains folded inside the rear luggage area.
The exact seating capacity is confirmed according to:
The XS, M or XL/L body length.
The original seat rows and rail system.
The model year and interior design phase.
The camper furniture height and folding-bed supports.
Rear air-conditioning equipment and wheel-arch trim.
The accessories and storage configuration selected.
Before manufacturing, we confirm the vehicle details and photographs of the rear interior to determine which seats can remain installed and operational.
Longer SpaceTourer Versions and Original Seat Retention
Longer compatible M and XL/L SpaceTourer versions can provide enough rear depth to retain more of the original seats while the camper furniture remains folded inside the luggage area.
The exact number of usable seats depends on the original seating system and selected camper configuration. It should therefore be confirmed individually rather than assuming that every long version can retain all its original seats.
Removable Camper Conversion Without Fixed Installation
The main camper furniture is designed as a removable system without permanent installation, drilling or structural changes to the Citroën SpaceTourer.
In this removable-use configuration, the furniture is normally treated as properly secured cargo rather than a permanently installed vehicle conversion. It must always be correctly fastened using suitable anchoring points whenever the vehicle is moving.
Technical inspection, registration and homologation requirements can vary according to the country, vehicle classification and accessories installed. Fixed electrical, gas, heating or structural equipment may be subject to additional requirements.
Camper Module and Mattress Pack Stored in the Luggage Area
When folded, the camper module and its made-to-measure New Design dark grey mattress pack remain compactly stored inside the rear luggage area.
In compatible configurations, the original parcel shelf can remain usable above the folded furniture. This depends on the SpaceTourer body length, furniture height, seat arrangement and interior trim.
Keeping the camper equipment folded below the rear window can help preserve rear visibility, maintain an organized luggage area and make the camper setup less visible from outside.
This removable and reversible design allows compatible SpaceTourer XS, M and XL/L vehicles to alternate easily between family transport, everyday passenger use and camper travel.
Camper Box Materials for Citroën SpaceTourer – Lightweight, Durable and Premium Finishes
Choose 15 mm Poplar, Natural Phenolic or Dark HPL Plywood – New Design Mattress Pack Included
The Citroën SpaceTourer camper furniture kit can be manufactured in three different 15 mm plywood materials. Each option provides a different balance of weight, impact resistance, appearance and ease of maintenance.
All available furniture finishes are treated to withstand the humidity and condensation associated with normal camper use.
✅ Included with every material: a made-to-measure New Design dark grey mattress pack adapted to the confirmed furniture and vehicle configuration.
💶 Current online price: from €875, excluding shipping. The final price can vary according to the selected material, SpaceTourer body length, seat configuration, side modules and accessories.
Poplar Plywood – Lightweight Natural Finish 🪶
Poplar plywood is the lightest material available for the Citroën SpaceTourer Camper Box. It is particularly suitable for customers who expect to install and remove the camper furniture frequently.
🎨 Colour and appearance
Very light natural colour, close to pearl white.
Subtle visible wood grain.
Clean and bright finish that coordinates with the dark grey mattress pack.
🔧 Technical characteristics
📏 15 mm plywood construction.
🪶 Lightest of the three available materials.
💧 Moisture-resistant treatment suitable for normal camper use.
🧰 Easier to handle when installing or removing the furniture.
✅ Good strength-to-weight ratio.
✅ Low tendency to splinter when correctly manufactured and maintained.
⚠️ Please note: Poplar is softer than natural phenolic or HPL plywood. Small pressure marks can appear if keys, tools or other hard objects are placed directly on the surface.
👉 Recommended for: customers who prioritize low weight, easy handling and a bright natural finish.
Natural Phenolic Plywood – Warm Wood Finish 🌲
Natural phenolic plywood combines a visible wood grain with greater surface and impact resistance than poplar. It creates a warmer, cabin-style appearance inside the Citroën SpaceTourer.
🎨 Colour and appearance
Medium natural wood tone.
Clearly visible grain and natural variations.
Warm, rustic finish suitable for camper and vanlife interiors.
🔧 Technical characteristics
📏 15 mm plywood construction.
⚖️ Slightly heavier than poplar.
🛡️ Greater resistance to impacts and pressure marks.
💧 Phenolic bonding provides high resistance to humidity and occasional water exposure.
✅ Durable construction suitable for frequent camper use.
🌲 Natural finish that coordinates well with the New Design dark grey mattress pack.
⚠️ Please note: The natural surface can be more porous than an HPL finish. Water and stains should be cleaned promptly, and the furniture should not be treated as suitable for continuous immersion.
👉 Recommended for: customers looking for a balance between durability, natural appearance and manageable weight.
HPL Phenolic Plywood – Dark Premium Finish 🛡️
HPL phenolic plywood is the most resistant and easiest-to-maintain material in the range. It is recommended for intensive camper use, outdoor sports and customers seeking a darker, professional finish.
🎨 Colour and appearance
Very dark brown or almost black finish.
Smooth and consistent HPL surface.
Premium appearance that contrasts with the dark grey mattress pack and vehicle interior.
🔧 Technical characteristics
📏 15 mm plywood construction.
🛡️ Highest resistance to impacts, everyday wear and pressure marks.
💧 High resistance to humidity and occasional water exposure.
🧽 Smooth, low-maintenance surface that is easy to clean.
✅ Greater resistance to scratches and stains than untreated natural wood finishes.
🔩 Strong construction suitable for frequent and long-term camper use.
⚠️ Please note: HPL phenolic plywood is the heaviest of the three materials. The total furniture weight also depends on the SpaceTourer body length, storage layout, side modules and accessories selected.
👉 Recommended for: customers who prioritize maximum durability, easy cleaning and a dark professional finish.
Which Citroën SpaceTourer Camper Furniture Material Should You Choose? 🤔
🪶 Choose Poplar Plywood if:
Low weight is your main priority.
You expect to install and remove the camper box frequently.
You prefer a very light natural finish.
🌲 Choose Natural Phenolic Plywood if:
You want a warmer and more traditional wood appearance.
You prefer a balance between weight and impact resistance.
You want visible natural wood grain inside your camper.
🛡️ Choose HPL Phenolic Plywood if:
Maximum resistance and easy cleaning are your priorities.
You frequently transport sports, camping or outdoor equipment.
You prefer a dark, professional camper furniture finish.
All three materials are available with our latest New Design camper furniture system and include the custom dark grey mattress pack.
👉 View current Citroën SpaceTourer camper furniture materials, configurations and prices:
Camper Furniture Kit Materials – Differences, Properties & Durability
Features of the Citroën SpaceTourer Camper Furniture Kit – Kitchen, Table and Smart Storage
Modular Camper Box Layout with Campingaz Drawer, Multi-Height Table and Coolzone 35L Fridge Compatibility
The Citroën SpaceTourer camper furniture kit combines a rear kitchen, adjustable table and multiple storage compartments within a compact, removable camper system.
Its internal distribution can be adapted to compatible SpaceTourer XS, M and XL/L versions according to the model year, body length, seats, interior trim, rear air-conditioning equipment and selected accessories.
Pull-Out Rear Kitchen Drawer for a Campingaz Stove 🔥
The rear kitchen includes a custom-built sliding drawer prepared for a compatible Campingaz-style stove.
Depending on the selected furniture layout and stove dimensions, the drawer can be prepared for a single-burner model or a larger compatible cooker.
✅ Accessible directly from the rear of the vehicle.
✅ Custom dimensions adapted to the selected stove.
✅ Practical outdoor cooking surface at the tailgate.
✅ Easy access without unfolding the complete camper bed.
Behind the kitchen drawer, an independent top-opening storage trunk provides space for cookware, food, gas cartridges and other camping equipment.
⚠️ Always use the stove according to the manufacturer's ventilation and safety instructions. Cooking inside the vehicle requires suitable ventilation and careful placement away from mattresses, curtains and other combustible materials.
👉 View the compatible Campingaz 1-burner stove:
https://www.kitmueblecamper.com/p/custom-campingaz-1-burner-stove-for-our-camper-furniture/
Multi-Height Indoor and Outdoor Camper Table 🍽️
A multi-height table is positioned in the central section of the Citroën SpaceTourer Camper Box.
The table can be configured for:
🍽️ Dining mode inside the SpaceTourer.
🛋️ Lounge mode at a lower height.
🌳 Outdoor use beside the vehicle when camping.
🧘 Relaxation or hammock-style mode, depending on the furniture configuration.
The table, its leg and the corresponding supports can be stored inside the camper furniture when not in use. This helps keep the luggage area organized and reduces movement or rattling while travelling.
The demonstration video on this page shows how the table changes between dining, lounge and sleeping configurations.
Modular Storage Compartments for Camping Equipment 📦
Behind the central table, a second top-opening trunk provides additional storage for bedding, clothing, food or camping accessories.
The left-hand section can include two further compartments, with one configured for dual access through both the top and front.
Depending on the selected layout, these storage areas can accommodate:
💧 A water container for a 12V outdoor shower.
❄️ A compatible compressor fridge.
🚽 A portable toilet.
🍳 Cooking equipment and food.
🧺 Clothing, bedding and travel essentials.
🔋 Electrical accessories or an auxiliary power system.
🦵 Table legs and folding-bed supports.
In the layout shown in our demonstration videos, the standard rear module can provide:
✅ Two rear top-access storage trunks.
✅ Three front-access compartments, including the kitchen and accessory areas.
✅ Dual top and front access for selected storage compartments.
The exact number, dimensions and opening direction of the compartments are confirmed according to the vehicle and furniture configuration.
Optional Side Storage Modules over the Wheel Arches 🧳
Compatible SpaceTourer configurations can include two side modules positioned over the wheel-arch areas.
Each module includes a top-opening lid, providing two additional hidden storage spaces for bedding, pillows, clothing or other lightweight travel equipment.
These side modules also extend the sleeping surface toward the vehicle walls, helping create a wider and more comfortable bed.
The dimensions and shape of the modules depend on the SpaceTourer body length, plastic wheel-arch covers, rear air-conditioning equipment and interior trim.
Two Possible Positions for the Compressor Fridge ❄️
A compatible compressor fridge can be positioned in two different areas of the camper furniture:
Inside a top-opening storage trunk: a compact solution that preserves the main front-access compartments.
On a front slide-out fridge drawer: provides easier access without lifting the fridge from the furniture.
The slide-out fridge drawer is manufactured as part of the custom camper box. Its position, dimensions, support system and effect on the furniture height must be confirmed before manufacturing.
💶 The sliding fridge configuration may involve an additional fitting cost, which is confirmed when the final furniture layout is selected.
👉 Configure the slide-out fridge drawer with your SpaceTourer Camper Kit:
Coolzone 35L Compressor Fridge for the SpaceTourer Camper Box 🧊
The Coolzone 35L compressor fridge is our recommended refrigeration option for compatible Citroën SpaceTourer camper furniture configurations.
Its principal features include:
❄️ 35-litre capacity with two internal compartments.
⚙️ High-efficiency LG compressor.
📱 Bluetooth control and integrated digital display.
🔌 12V/24V DC and 100–240V AC compatibility.
🌡️ Adjustable temperature from approximately −20°C to +20°C.
🔇 Noise level of up to approximately 45 dB.
🔋 Three-stage vehicle battery protection.
📐 External dimensions of approximately 580 × 345 × 382 mm without handles.
Depending on the furniture layout, the Coolzone 35L can be stored inside a dedicated top-opening compartment or installed on the optional sliding fridge support.
⚠️ Compatibility must be confirmed for the exact SpaceTourer version and furniture configuration. The fridge compartment must provide sufficient space for the appliance, cables and compressor ventilation.
👉 View the Coolzone 35L compressor fridge:
A Camper Layout Adapted to Your SpaceTourer ✅
Before manufacturing, we confirm:
Vehicle model year and design phase.
XS, M or XL/L body length.
Original seats and rail system.
Interior trim and wheel-arch covers.
Rear air-conditioning equipment.
Preferred fridge position.
Kitchen drawer and stove dimensions.
Storage and accessory requirements.
This allows us to prepare a Citroën SpaceTourer Camper Box that balances cooking, refrigeration, storage, sleeping comfort and everyday passenger use.
Citroën SpaceTourer Camper Box – 35L Slide-Out Fridge Drawer Example
Citroën SpaceTourer Camper Storage and Modular Layout – Optimized for Every Body Length
Dual-Access Trunks, Wheel-Arch Side Modules, Custom Mattress Pack and 185–190 cm Bed
The Citroën SpaceTourer Camper Box is designed to maximize storage while preserving a comfortable bed, practical indoor table and reversible everyday vehicle use.
Its modular distribution is adapted to the SpaceTourer model year, XS/M/XL-L body length, seats, rail system, wheel arches, rear air-conditioning equipment and selected accessories.
Left-Side Storage Trunk with Dual Access 📦
We recommend configuring the left-side storage trunk with both top and front openings. This provides convenient access in different camper modes and makes better use of the available internal space.
The compartment can be used for:
💧 A water container for the 12V outdoor shower.
🚽 A compatible portable toilet.
🔋 Electrical accessories or portable power equipment.
🧰 Frequently used camping equipment.
🥫 Food, kitchen accessories or cleaning products.
The front opening remains practical when another object is positioned above the compartment, while the top lid provides wider access when the bed or mattress section is lifted.
Recommended Portable Toilet Storage 🚽
Our usual recommendation is to store the portable toilet inside the central table compartment while travelling.
After arriving at the destination and unfolding the camper furniture, it can be moved temporarily to a suitable front floor area when the table is being used for dining or relaxation.
This arrangement keeps the left-side trunk available for the shower water container, electrical equipment or other camping accessories.
⚠️ The portable toilet must remain closed, empty when necessary and properly secured whenever the vehicle is moving.
Wheel-Arch Side Modules and Wider Sleeping Platform 🛏️
Compatible SpaceTourer layouts can include side storage modules positioned over the wheel arches.
These modules perform two functions:
✅ They extend the sleeping platform toward the sides of the vehicle.
✅ They provide two additional hidden storage compartments with top-opening lids.
The side compartments are particularly useful for organizing:
🛏️ Bedding, pillows and blankets on one side.
👕 Clean clothing or laundry on the other.
🧳 Lightweight travel equipment.
🧼 Personal and hygiene products.
The result is a wider, more organized sleeping area that approaches the available wall-to-wall interior width without permanently attaching furniture to the vehicle.
The shape of each module is adapted to the wheel-arch trim, rear plastic panels and air-conditioning equipment of the confirmed SpaceTourer.
Double-Drawer Camper Box Configuration 🗄️
A double-drawer configuration can be manufactured on request for compatible Citroën SpaceTourer furniture layouts.
Although it can create an attractive and symmetrical rear appearance, we do not normally recommend it as the most space-efficient option.
⚠️ Its practical disadvantages include:
Additional drawer panels reduce the usable internal volume.
Extra runners and hardware increase the furniture weight.
The extended drawers generate greater leverage on the slides.
More components occupy space that could otherwise be used for storage.
When the double-drawer layout is selected, we use reinforced full-extension slides rated for approximately 30–40 kg, depending on the drawer dimensions, installation and load distribution.
💶 Availability and the current price of this configuration are confirmed before manufacturing.
Coordinated Design and Long-Term Durability 🛡️
The Citroën SpaceTourer camper furniture kit is designed to combine structural strength, practical organization and visual harmony with the vehicle interior.
The made-to-measure New Design dark grey mattress pack coordinates with the available furniture finishes:
🪶 Light natural poplar plywood.
🌲 Natural wood phenolic plywood.
🛡️ Dark HPL phenolic plywood.
Our priority is to manufacture a compact, stable and durable camper system suitable for regular installation, removal and travel.
Correct securing, balanced loading, cleaning and maintenance help preserve the furniture, slides, supports, hinges and mattress pack over long-term use.
Citroën SpaceTourer Camper Box Dimensions 📐
The final dimensions depend on the model year, body length, seats, interior trim and selected configuration.
Measurement Approximate dimensionCentral furniture width 115–120 cm
Optional side modules Around 14 cm per side
Total width added by side modules Around 28 cm
Typical sleeping width with side modules Around 143–148 cm
Maximum width in selected custom layouts Up to approximately 155 cm
Folded furniture depth Around 120 cm
Folding bed length Around 185–190 cm
📌 All measurements are approximate. The actual sleeping width can vary because of plastic side trim, wheel-arch covers, rear air conditioning, seat rails and the shape of the custom mattress pack.
The furniture and mattress measurements are confirmed for the specific vehicle before manufacturing.
Custom New Design Mattress Pack Included 💤
Every available Citroën SpaceTourer camper furniture material includes a made-to-measure New Design dark grey mattress pack.
The mattress is divided into modular sections corresponding to the folding furniture structure. This makes it possible to change between:
🛏️ Bed mode.
🍽️ Dining mode.
🛋️ Lounge mode.
🧘 Relaxation or hammock-style mode, depending on the layout.
Individual mattress sections can be lifted to access selected storage compartments without completely dismantling the sleeping surface.
Each piece is shaped according to the confirmed furniture and vehicle dimensions, helping minimize gaps and create a flat, supportive bed for weekend trips and longer journeys.
👉 Discover our made-to-measure camper mattress packs:
https://www.kitmueblecamper.com/en/colchones-camper/
Rear Air Conditioning, Wheel-Arch Trim and Removable Side Wings 🧩
Rear air-conditioning equipment and plastic wheel-arch covers can reduce or alter the available interior width.
When necessary, the camper furniture can be adapted using shaped side modules or removable side wings. These components help:
✅ Follow the contour of the vehicle interior.
✅ Keep the sleeping sections correctly aligned.
✅ Use more of the available width.
✅ Preserve the removable character of the camper system.
The exact solution is confirmed from the vehicle year, body length and photographs of the luggage area.
SpaceTourer, Traveller, Zafira Life and Proace Verso Compatibility 🚐
Citroën SpaceTourer, Peugeot Traveller, Opel Zafira Life and Toyota Proace Verso share closely related PSA/Stellantis EMP2 architecture. This allows us to use a similar modular camper furniture concept across these passenger vans.
However, the camper boxes should not automatically be considered interchangeable.
Seat rails, plastic trim, rear air conditioning, wheel arches, body lengths and anchoring points can vary between models, model years and equipment levels. Each order must therefore be checked and adapted to the exact vehicle.
This individual verification applies to:
Citroën SpaceTourer Camper Furniture Kits
Peugeot Traveller Camper Furniture Kits
Opel Zafira Life Camper Furniture Kits
Toyota Proace Verso Camper Furniture Kits
Included Mattress Pack and Practical Storage Access ✅
The made-to-measure New Design mattress pack is included with every available furniture finish.
The modular design allows individual mattress and bed sections to be lifted so that selected trunks and compartments remain accessible without removing the complete bed.
The main furniture is designed for quick installation and removal without drilling or permanent structural changes. When used as a removable system, it must remain properly secured while travelling, and local requirements should be checked according to the vehicle, country and accessories installed.
👉 View the Citroën SpaceTourer Camper Furniture Kit:
Structural Stability and Height Options for the Citroën SpaceTourer Camper Kit
Two-Part Folding Bed, Integrated Support Storage and Configurations With or Without Rear Seats
The Citroën SpaceTourer Camper Furniture Kit uses a compact two-part structure designed to create a stable sleeping platform while preserving the removable and reversible character of the system.
The furniture height, folding supports and contact points are adapted to the model year, XS/M/XL-L body length, seats, rail system and interior trim of the confirmed vehicle.
Integrated Storage for Table Legs and Bed Supports 🦵
Every Citroën SpaceTourer camper module includes a dedicated compartment for storing the multi-height table leg and folding-bed supports when they are not in use.
This integrated storage helps:
✅ Keep the complete camper system inside the luggage area.
✅ Prevent loose legs and supports from moving while travelling.
✅ Reduce rattling and contact between furniture components.
✅ Keep the rear area organized and ready for deployment.
✅ Avoid occupying the principal storage compartments with structural parts.
The legs, table and supports must be returned to their designated storage positions and secured before the vehicle moves.
Two-Part Folding Bed and Load-Support System ⚖️
When unfolded for sleeping, the Citroën SpaceTourer camper bed distributes its support between two principal sections:
1️⃣ Main rear camper module
This is the largest and strongest section of the furniture. It remains positioned inside the rear luggage area and forms the principal base for the bed, kitchen, table and storage system.
2️⃣ Front folding bed extension
The front section unfolds toward the passenger area. Depending on the selected layout, it rests on compatible folded rear seats or on dedicated folding supports when the seats have been removed.
This two-part design helps spread the sleeping load across the intended furniture and support points rather than concentrating it on one small area.
⚠️ The camper bed must only be used when the vehicle is parked on stable ground and the extension, legs and locking elements are correctly positioned.
Camper Furniture Height with or Without Rear Seats 📐
The final height is adapted to the seat arrangement and interior of the SpaceTourer:
Configuration Approximate height Bed supportWith compatible folded rear seats Around 55 cm Folded seats and/or adapted supports
Without rear seats Around 40–44 cm Main module and dedicated folding legs
All measurements are approximate and must be confirmed before manufacturing.
Camper Box with Rear Seats Retained 💺
When compatible rear seats remain installed, the furniture is normally manufactured at approximately 55 cm high.
This height helps align the folding bed platform with the level of the folded seats.
Depending on the SpaceTourer body length, original seat arrangement and camper furniture configuration, it may be possible to retain 5 or 6 usable passenger seats while the module remains folded in the luggage area.
✅ Preserves more everyday passenger capacity.
✅ Uses compatible folded seats as part of the bed-support layout.
✅ Keeps the camper module compactly stored behind the retained seats.
✅ Allows the SpaceTourer to alternate between passenger and camper use.
The exact number of usable seats must be confirmed individually. Not every XS, M or XL/L interior has the same rails, seat-folding system or available rear depth.
Lower Camper Furniture Without Rear Seats 🛏️
When the rear seats are removed, the camper module can normally be manufactured at approximately 40–44 cm high.
The lower configuration provides:
✅ More usable headroom above the sleeping platform.
✅ A lower and more accessible bed.
✅ Easier entry and exit.
✅ A support system based on the main module and dedicated folding legs.
✅ Storage distribution adapted to the equipment selected.
The final height depends on the wheel arches, interior trim, rear air-conditioning equipment, preferred storage capacity and fridge position.
Adapted Contact Points and Seat Protection 🛡️
When the folding extension uses compatible folded seats as support, its contact areas are adapted to the confirmed vehicle layout.
The objective is to distribute pressure across suitable support points and avoid concentrated contact with seat upholstery, plastic trim or unsupported areas.
For correct use:
The seats must be fully folded and correctly locked.
All contact surfaces must be clean and free of hard objects.
The furniture must be unfolded in the indicated order.
Folding legs and reinforcement points must be correctly positioned.
The recommended load distribution must be respected.
The furniture must not contact mechanical, electrical or seat-adjustment components improperly.
Correct installation and use help protect both the camper furniture and the vehicle interior. Compatibility is confirmed before manufacturing because seat shapes and folding systems can vary.
Secure Attachment While Travelling 🔒
The camper furniture must always remain correctly secured whenever the Citroën SpaceTourer is moving.
The attachment method is selected according to the original anchoring points, rails and interior configuration available in the vehicle.
Before travelling:
✅ Fold the bed extension completely.
✅ Store the table leg and bed supports in their compartments.
✅ Close and secure drawers and lids.
✅ Secure the fridge, water containers and portable equipment.
✅ Check that the main camper module cannot slide or lift.
✅ Distribute luggage without exceeding the vehicle's permitted load.
The sleeping platform must never remain unfolded while the vehicle is moving.
Removable Structure Without Permanent Vehicle Modifications 🔄
The main Citroën SpaceTourer Camper Box is designed for installation without drilling or permanent structural changes to the vehicle.
When used as a removable system, it can be installed, folded, removed and reinstalled according to daily passenger, family or camper needs.
In this removable-use configuration, the furniture is normally treated as correctly secured cargo rather than a permanently installed conversion.
⚠️ Technical inspection, registration and homologation requirements can vary according to the country, vehicle classification and accessories installed. Fixed electrical systems, gas, heating or structural equipment may require additional review.
SpaceTourer Camper Kit Materials and Finishes 🎨
The camper module is available in:
🪶 Poplar plywood: the lightest and easiest-to-handle option.
🌲 Natural phenolic plywood: a balance of strength and natural appearance.
🛡️ Dark HPL phenolic plywood: the most resistant and easiest-to-clean finish.
Every available material includes a made-to-measure New Design dark grey mattress pack.
Although Peugeot Traveller, Opel Zafira Life and Toyota Proace Verso share closely related architecture with the SpaceTourer, each furniture kit must be checked and adapted to the exact model, year, seats, trim and anchoring points.
👉 View the Citroën SpaceTourer Camper Furniture Kit, materials and configurations:
Fiat Talento Camper Box – Removable Camper Kit to Keep the 3rd Row of Seats Installed – L2 Van Camper Conversion
Available Citroën SpaceTourer Camper Kit Configurations and Accessories
Campingaz Kitchen, Coolzone 35L Fridge, 20L Shower, Auxiliary Battery and Autoterm 2 kW Heating
The Citroën SpaceTourer Camper Furniture Kit can be personalized with compatible accessories designed to improve cooking, refrigeration, water supply, privacy, electrical autonomy and comfort.
The demonstration videos on this page show real examples of several accessories and camper furniture configurations.
Compatibility is confirmed according to the SpaceTourer model year, XS/M/XL-L body length, seat arrangement, interior trim, rear air conditioning and selected furniture layout.
Foldable Camper Sink and Draining Rack 💧
The foldable sink provides a compact alternative to a permanently installed water unit.
It includes a drain plug and can be combined with the portable 12V shower to create a practical washing area for dishes, hands, personal hygiene or camping equipment.
When not in use, the sink folds compactly to preserve the available camper space.
👉 View the Foldable Camper Sink:
12V Outdoor Shower with 20L Water Tank 🚿
The portable outdoor shower includes a 20-litre water container, 12V pump, cable and shower hose.
It can be used for:
🚿 Outdoor showering.
🍽️ Washing dishes.
🚲 Cleaning bicycles or sports equipment.
🐕 Washing pets.
🧼 General camper cleaning.
The water container can be stored inside a compatible dual-access furniture compartment.
👉 View the 12V Outdoor Shower with 20L Tank:
https://www.kitmueblecamper.com/p/12v-outdoor-camper-shower-20l-portable-water-tank/
Campingaz Stove and Custom Rear Kitchen Drawer 🔥
The rear kitchen drawer can be manufactured to accommodate a compatible Campingaz-style stove.
The drawer provides an accessible cooking surface at the rear of the SpaceTourer without requiring a permanently installed kitchen.
The exact drawer dimensions are adapted to the selected stove and camper furniture configuration.
⚠️ Always follow the stove manufacturer's ventilation and safety instructions.
👉 View the Compatible Campingaz 1-Burner Stove:
https://www.kitmueblecamper.com/p/custom-campingaz-1-burner-stove-for-our-camper-furniture/
Coolzone 35L Compressor Fridge ❄️
The Coolzone 35L compressor fridge is our recommended refrigeration option for compatible Citroën SpaceTourer camper furniture layouts.
It offers:
❄️ 35-litre capacity.
⚙️ High-efficiency LG compressor.
📱 Bluetooth control.
🔌 12V/24V DC and 100–240V AC operation.
🌡️ Adjustable cooling and freezing.
🔋 Vehicle battery protection system.
The fridge can be positioned inside a compatible top-opening compartment or on an optional slide-out support.
Its location, ventilation and cable access must be confirmed before manufacturing.
👉 View the Coolzone 35L Compressor Fridge:
Nine-Layer Thermal Blackout Covers 🌙
Made-to-measure thermal blackout covers provide privacy and help protect the SpaceTourer interior from sunlight, heat and cold.
The nine-layer Isoflex construction is adapted to the vehicle windows. Before manufacturing, photographs are required to confirm the model year, body length, tailgate or rear-door design and number of windows.
👉 View the Nine-Layer Thermal Blackout Covers:
https://www.kitmueblecamper.com/p/blackout-shades-thermal-insulation-for-camper-vans1/
Modular 2+1 Camper Furniture Configuration 🧩
The 2+1 configuration separates the furniture into removable sections, providing greater flexibility between passenger use, luggage capacity and camper travel.
The exact arrangement depends on the SpaceTourer body length, seat rails and number of seats that the customer wants to retain.
👉 View the Modular 2+1 Configuration:
https://www.kitmueblecamper.com/p/en-modalidad-2-1/
Auxiliary Battery System with Optional Inverter 🔋
An auxiliary battery system provides independent power for compatible camper accessories without relying exclusively on the vehicle's starter battery.
Depending on the selected installation, it can power:
❄️ Compressor fridge.
💡 Camper lighting.
🚿 12V shower.
📱 USB devices.
🔌 Compatible 12V or 230V equipment when an inverter is installed.
Battery type, capacity, charging system, cable protection and installation location are confirmed according to the SpaceTourer and the customer's expected consumption.
👉 View the Camper Auxiliary Battery System:
https://www.kitmueblecamper.com/p/camper-auxiliary-battery-power-supply-for-camper-vans/
Independent California-Style Sink and Kitchen Unit 🚰
The independent California-style module provides an additional sink, water and storage area separate from the principal camper box.
Depending on the vehicle and configuration, it can include:
🚰 Integrated sink.
💧 Clean and waste water containers.
⚡ 12V water pump.
🗄️ Drawers and storage compartments.
🍳 Additional kitchen preparation area.
Its position is adapted to the seats, sliding doors and available interior space.
👉 View the Independent Camper Sink and Kitchen Unit:
https://www.kitmueblecamper.com/p/camper-sink-kitchen-unit-compatible-with-camper-furniture-kits/
Autoterm 2 kW Stationary Heater 🔥
An Autoterm 2 kW stationary heater can be installed in compatible Citroën SpaceTourer configurations to provide warm air during colder trips.
Before installation, we confirm:
The most suitable heater location.
Fuel and electrical connections.
Hot-air outlet position.
Combustion-air intake and exhaust routing.
Clearance from furniture and vehicle components.
Applicable inspection or homologation requirements.
Stationary heating must be professionally installed and may require certification or legalization depending on the country and vehicle.
👉 Request Information About the Autoterm 2 kW Installation:
How to Order the SpaceTourer Kit with Accessories 🛒
You can add available accessories to your basket through our online shop or contact us directly by WhatsApp.
Send us:
Vehicle year.
XS, M or XL/L body length.
Number and distribution of seats.
Photographs of the luggage area.
Preferred furniture material.
Accessories you want to include.
👉 Visit the Online Shop:
https://www.kitmueblecamper.com/en/tienda-online/
📩 WhatsApp Direct:
Installing the Citroën SpaceTourer Camper Furniture Kit
Quick Self-Installation, Secure Attachment and Reversible Everyday Use
The Citroën SpaceTourer Camper Furniture Kit is designed for quick installation and removal without drilling or making permanent structural modifications to the vehicle.
This removable system allows you to alternate between everyday passenger or family use and camper mode whenever required.
Quick Installation in a Few Minutes ⏱️
The camper furniture is delivered assembled and prepared for the confirmed SpaceTourer configuration.
The principal installation process consists of:
1️⃣ Positioning the folded camper module inside the rear luggage area.
2️⃣ Aligning it with the confirmed rails or anchoring points.
3️⃣ Securing the furniture using the appropriate attachment system.
4️⃣ Checking that drawers, lids and removable components are closed.
5️⃣ Storing the table leg and bed supports inside their designated compartments.
The exact installation time depends on the furniture size, vehicle access and number of people handling the module.
Secure Attachment While Travelling 🔒
The camper box must always remain correctly secured whenever the vehicle is moving.
The attachment system is selected according to the original rails and anchoring points available in the SpaceTourer.
Before travelling:
✅ Fold the complete bed structure.
✅ Store the table leg and folding supports.
✅ Close drawers and top-opening lids.
✅ Secure the fridge, water containers and portable accessories.
✅ Check that the main module cannot slide, lift or tip.
✅ Respect the vehicle's permitted load.
The bed must only be unfolded when the vehicle is parked on stable ground.
Everyday Use with the Camper Box Folded 🚐
While travelling, the furniture remains folded inside the rear luggage area.
The made-to-measure New Design dark grey mattress pack can also be stored within the same rear setup in compatible configurations.
This keeps the SpaceTourer organized and allows the bed, kitchen, table and storage system to be deployed after arriving at the destination.
Use of the original parcel shelf and the available rear visibility depend on the vehicle body length, furniture height and interior configuration.
Camper Kit with Rear Seats Retained 💺
When compatible rear seats remain installed, the furniture is normally manufactured at approximately 55 cm high.
The folding bed extension rests on compatible folded seats or adapted supports.
Depending on the SpaceTourer version and original seat arrangement, selected passenger seats can remain installed and usable while the camper module is folded.
The exact number of seats must be confirmed before manufacturing.
Lower Camper Furniture Without Rear Seats 🛏️
When rear seats are removed, the camper box can normally be manufactured at approximately 40–44 cm high.
This configuration provides:
More usable headroom.
A lower sleeping platform.
Easier access to the bed.
Support through the main module and dedicated folding legs.
Storage adapted to the selected accessories.
All heights are approximate and depend on the vehicle interior.
Detailed Citroën SpaceTourer Compatibility Check 🔍
Before manufacturing, we confirm:
Model year and design phase: original 2016–2023 design or updated 2024–present model.
Body length: XS, M or XL/L.
Diesel or electric ë-SpaceTourer version.
Original 5, 7, 8 or 9-seat arrangement.
Seat rails and folding system.
Wheel arches and plastic side trim.
Rear air-conditioning equipment.
Tailgate or rear-door configuration.
Available original anchoring points.
Preferred camper furniture height.
Fridge, battery and heating position.
Selected accessories and storage requirements.
📩 Send us these details and photographs of the rear interior:
Frequently Asked Questions About the Citroën SpaceTourer Camper Kit
Which Citroën SpaceTourer versions are compatible with the camper kit?
The camper furniture can be adapted to compatible Citroën SpaceTourer XS, M and XL configurations. Before manufacturing, we confirm the model year, body length, seat arrangement, interior trim, wheel arches, rear air-conditioning equipment and available anchoring points.
Is the Citroën SpaceTourer Camper Kit removable and does it require homologation?
The main camper furniture is designed as a removable system without drilling or permanent vehicle modifications. In a removable-use configuration, it is normally treated as securely fastened cargo rather than a fixed conversion. It must always be properly secured while travelling, and local requirements should be checked according to the country, vehicle and accessories installed.
Can I retain the original seats with the SpaceTourer Camper Kit installed?
Compatible configurations can retain selected original passenger seats while the camper furniture remains folded inside the rear luggage area. The exact number of usable seats depends on the SpaceTourer body length, original seat arrangement, rail system and selected camper furniture configuration.
What are the bed dimensions of the Citroën SpaceTourer Camper Kit?
The folding bed is approximately 185–190 cm long. The sleeping width can range from approximately 115 to 155 cm depending on the interior trim, wheel arches, rear air-conditioning equipment, mattress configuration and optional side modules.
What is included with the Citroën SpaceTourer Camper Furniture Kit?
The kit includes a removable folding bed structure, a made-to-measure New Design dark grey mattress pack, a rear kitchen drawer prepared for a compatible Campingaz-style stove, a multi-height indoor and outdoor table, modular storage compartments and the required folding bed supports. Exact equipment depends on the selected configuration.
Which materials and accessories are available for the SpaceTourer Camper Kit?
The furniture is available in 15 mm poplar plywood, natural phenolic plywood or dark HPL phenolic plywood. Compatible options can include a Coolzone 35L compressor fridge, slide-out fridge drawer, foldable sink, 12V outdoor shower with 20L tank, thermal blackout covers, auxiliary battery system, modular 2+1 configuration and an independent sink and kitchen unit.
Customer Reviews of Kit Muebles Camper
4.9/5 Rating Based on 51 Customer Reviews ⭐
Customers can view genuine reviews, photographs and completed camper furniture projects through our different locations and service areas.
⭐ Overall customer rating: 4.9/5 from 51 reviews
🇪🇸 Madrid – Arganda del Rey
https://maps.app.goo.gl/YR3S8WCe1pqdb1Xb7
🇪🇸 Barcelona – Tordera
https://maps.app.goo.gl/bHjBo51GtmkenoCa7
🇪🇸 Seville – Écija
https://maps.app.goo.gl/13MZuMieqKebSP9w6
🇫🇷 France – Narbonne / Argeliers area
https://maps.app.goo.gl/6HwG9uanwFepyD6cA
Order Your Citroën SpaceTourer Camper Furniture Kit
Custom Removable Camper Box with Folding Bed and New Design Mattress Pack Included
Convert your Citroën SpaceTourer into a practical camper with a made-to-measure furniture kit designed for travel and reversible everyday vehicle use.
Choose the body length, seats, furniture height, material and compatible accessories. Before manufacturing, we confirm the complete vehicle configuration to prepare the most suitable solution.
🛒 Buy the Citroën SpaceTourer Camper Furniture Kit:
📩 Request a Personalized Compatibility Check by WhatsApp:
Thank you for trusting Kit Muebles Camper. Above all, thanks be to God for every project, every journey and every opportunity to serve.