Fiat Ducato Camper Box – Removable Modular Camper Conversion Kit

Removable Fiat Ducato Camper Kit for L1–L4 and H1–H3 Vans

Camper Furniture with a 185–190 cm Bed, Custom Mattress Pack, Rear Kitchen and XL Modular Storage

Transform your Fiat Ducato into a spacious and practical camper van with a removable, self-install camper furniture kit designed for travel, camping and everyday vehicle use.

The system can be adapted to compatible Fiat Ducato L1, L2, L3 and L4 vans with H1, H2 or H3 roof heights, including Cargo, Combi and Minibus configurations. Before manufacturing, we confirm the model year, body length, roof height, seating or bulkhead arrangement, wheel-arch trim, rear equipment and available anchoring points.

The Fiat Ducato camper kit can include:

✅ A removable folding camper bed approximately 185–190 cm long and up to 180 cm wide, depending on the confirmed vehicle configuration.

✅ A custom-made dark-grey modular mattress pack, included with every furniture material.

✅ A rear pull-out kitchen drawer prepared for a compatible Campingaz-style stove.

✅ A multi-height table for indoor dining, lounge use and outdoor camping.

✅ XL storage trunks and front-access compartments for cooking equipment, water, clothes and travel accessories.

✅ Side modules covering compatible wheel-arch areas and extending the sleeping platform across the rear interior.

✅ A dedicated compartment or optional sliding support for the recommended Coolzone 35L compressor fridge.

✅ A folding support system adapted to compatible layouts with or without rear passenger seats.

When folded, the removable Fiat Ducato camper furniture kit remains within the rear cargo area, helping the van stay practical for work, passenger transport and everyday use.

In compatible Combi and Minibus layouts, selected rear seats can remain operational. The exact number of usable seats depends on the original seating arrangement and chosen furniture configuration.

When installed without permanent structural modifications, the system is normally treated as correctly secured removable cargo rather than a fixed camper conversion. It must always be properly secured while travelling, and the applicable requirements should be checked according to the country, vehicle, inspection authority and accessories installed.

👉 Buy the Fiat Ducato camper furniture kit with custom mattress pack included:

https://www.kitmueblecamper.com/p/fiat-ducato-camper-camper-furniture-kit-with-mattress-pack-included/ 

Fiat Ducato Camper Furniture Kit for Large-Volume Vans

Universal Central Module with Vehicle-Specific Side Extensions

Our large-volume camper furniture system uses the same central module across all compatible large vans, providing the main folding bed structure, rear kitchen drawer, multi-height table and central storage compartments.

This central module can be installed in models including:

• Fiat Ducato

• Peugeot Boxer

• Citroën Jumper

• Opel Movano

• Ford Transit

• Renault Master

• Mercedes-Benz Sprinter

• Other compatible large-volume vans

Depending on the vehicle, only the side modules may need to be adapted to match the available interior width, wheel-arch shape and side-wall trim.

These lateral modules cover the wheel-arch areas, extend the sleeping platform towards the van walls and provide additional top-access storage. Their measurements may therefore vary between different large-van models and interior configurations.

Before confirming an order, we check the model year, body length, roof height, Cargo, Combi or Minibus layout, rear seats, bulkhead, interior trim, wheel arches and available anchoring points.

This allows us to determine:

• The correct side-module dimensions

• The installation height

• The required folding supports

• The most suitable securing points

The central furniture module and its principal functions remain the same, while the lateral elements and installation configuration are adjusted only when required.

Fiat Ducato Compatibility by Length, Height and Interior Layout

Suitable for Compatible L1–L4 and H1–H3 Cargo, Combi and Minibus Vans

The same central camper furniture module can be installed in compatible Fiat Ducato vans from earlier and current model years, including:

• L1, L2, L3 and L4 body lengths

• H1, H2 and H3 roof heights

• Cargo and panel vans

• Combi and Minibus passenger versions

• Configurations with or without rear seats

For the Fiat Ducato, the side modules are configured according to the usable interior width, wheel arches and installed side-wall trim. This allows the sleeping platform to use the available rear width while adding practical storage on both sides.

The installation height and folding supports are also selected according to whether the rear seats remain installed, but the central camper module remains unchanged.

Fiat Ducato Removable Camper Conversion Kit

Quick Self-Install System for 3, 5 or 6-Seat Cargo, Combi and Minibus Layouts

Our Fiat Ducato removable camper kit can transform a compatible large-volume van into a practical camper in minutes while allowing 3, 5 or 6 seats to remain operational, depending on the vehicle's original seating arrangement and selected configuration.

The core central module is the same system used across our compatible large-volume vans. When necessary, the side modules are adapted to the Fiat Ducato's usable interior width, wheel arches and side-wall trim.

The removable furniture can be installed without permanent structural modifications and includes a folding bed, rear kitchen, multi-height table and XL storage system.

When folded, the complete module and its custom-made dark-grey modular mattress pack remain neatly inside the rear cargo area, providing:

• ✔ Full rear-window visibility in compatible Combi and Minibus versions

• ✔ Secure attachment using suitable factory anchoring points

• ✔ A clean and organised interior

• ✔ Practical daily use as a commercial or family van

• ✔ A reversible camper setup for weekends and longer journeys

When installed as a removable system without permanent structural modifications, the furniture is normally treated as correctly secured cargo rather than a fixed camper conversion. It must always be properly secured while travelling, and the applicable requirements should be checked according to the country, vehicle, inspection authority and accessories installed.

Materials for the Fiat Ducato Camper Furniture Kit

Three Durable Plywood Options with the Custom Mattress Pack Included

The Fiat Ducato camper furniture kit is available in three 15 mm plywood materials. Every option includes the custom-made dark-grey modular mattress pack in the stated price.

⭐ 1. Natural Poplar Plywood — €925

Lightweight, Bright and Moisture-Resistant

• Light cream colour with subtle natural grain

• Lightweight and easy to handle

• 15 mm thickness

• Hydrofuge treatment for high moisture resistance

• Strong and difficult to crack or splinter

• Bright finish that helps create a lighter-looking interior

• Particularly suitable for large camper furniture structures

Consideration: Poplar is slightly softer than the other options and may mark if pressed against keys or other sharp objects.

Ideal for users looking for a lightweight structure and a clean, bright interior.

⭐ 2. Natural Phenolic Pine Plywood — €900

Natural Wood Finish, Strong Structure and Excellent Value

• Warm natural wood tone with visible grain

• 15 mm thickness

• Phenolic treatment between the internal layers

• Strong, durable and highly resistant to moisture

• Natural cabin-style appearance

• Excellent balance between price, weight and structural strength

Consideration: Its natural surface is more porous than the HPL finish.

Ideal for customers who prefer visible wood grain and a warm, natural camper interior.

⭐ 3. Dark HPL Coachbuilder-Grade Phenolic Plywood — €950

Heavy-Duty, Water-Resistant and Easy to Clean

• Very dark brown, almost black finish

• 15 mm thickness

• The most resistant option for intensive camper use

• Phenolic plywood construction with durable HPL-faced surfaces

• Smooth, easy-clean face and resistant anti-slip face

• Excellent protection against moisture, dirt and daily wear

• Modern professional appearance

Consideration: Its dense, reinforced construction makes it less light than natural phenolic pine, although it remains suitable for removable camper furniture.

Ideal for frequent travel, professional use and customers seeking maximum durability with minimal maintenance.

Fiat Ducato Camper Furniture Kit Features and Modular Layout

Rear Kitchen, Multi-Height Table, XL Storage and Coolzone 35L Fridge Compatibility

The Fiat Ducato camper furniture kit combines a standard central module with side extensions adapted when required to the vehicle's interior width, wheel arches and side-wall trim.

The complete layout is designed to maximise storage and sleeping space while remaining removable, self-install and reversible.

🔹 Rear Pull-Out Kitchen Drawer

At the rear, the central module includes a pull-out kitchen drawer prepared for a compatible single-burner or compact Campingaz-style stove.

Behind the kitchen drawer is an independent storage trunk with a top-opening lid, suitable for:

• Cookware and utensils

• Food and bottles

• Stove cartridges

• Camping accessories

🔹 Multi-Height Indoor and Outdoor Table

The central table can be positioned at different heights and used:

• Inside the van in dining mode

• In lounge or sofa mode

• In the hammock position shown in the demonstration video

• Outside the vehicle as a camping table

Behind the table is another independent storage trunk with a top-opening lid, providing additional space without increasing the external dimensions of the central module.

Smart Camper Storage and 35L Compressor Fridge Compartment

Top and Front Access for the Coolzone 35L Fridge, Water and Shower Equipment

On the left side of the central furniture system are two practical storage compartments with top and front access.

The rear-left compartment is prepared for a compatible 35–40L compressor fridge, including the recommended Coolzone 35L or a similarly sized FR40-type model.

Depending on the selected configuration, the fridge can be placed:

• Inside the dedicated rear compartment, or

• On an optional front sliding support

The front-left compartment can be used for:

• A 12V outdoor shower

• A compatible water container

• Shower hoses and accessories

• General camping equipment

• A portable toilet

For customers carrying a portable toilet, we recommend storing it inside the table compartment while travelling and moving it to the front cabin area after deploying the bed. This keeps the left-side compartment available for water and shower equipment.

Full-Width Fiat Ducato Camper Bed with Adaptable Side Modules

Wheel-Arch Covers with Additional Top-Access Storage

The standard central module can be combined with side modules adapted to the Fiat Ducato's interior, allowing the sleeping platform to extend towards the vehicle walls.

The measurements of these lateral modules may vary according to:

• Wheel-arch shape

• Usable interior width

• Side-wall trim

• Cargo, Combi or Minibus configuration

• Rear equipment already installed

Each side module includes a top-opening lid and can provide additional storage for:

• Bedding and blankets

• Clean or used clothing

• Shoes

• Laundry bags

• Personal and travel items

This configuration creates a wider sleeping surface while making practical use of the areas above the wheel arches.

Optional Dual-Drawer Layout for the Camper Box

Available on Request, but Not Recommended for Maximum Storage Efficiency

A dual-drawer configuration can be manufactured on request, although we normally recommend the standard open-trunk layout.

Full-extension drawers require additional internal woodwork and hardware, which can:

• Reduce usable storage capacity

• Add unnecessary weight

• Increase long-term leverage on the drawer slides

• Make large items more difficult to store

Where drawers are requested, appropriate reinforced slides are selected according to the expected load. For most camper layouts, one large open compartment remains the most spacious, durable and practical solution.

Camper Furniture Materials, Design and Long-Term Durability

Light Poplar, Natural Phenolic Pine or Dark HPL with a Dark-Grey Mattress Pack

Our latest furniture design combines compact construction, reinforced load-bearing areas and efficient access to every storage compartment.

The furniture is available in:

• Natural poplar plywood

• Natural phenolic pine plywood

• Dark coachbuilder-grade HPL phenolic plywood

Each material is combined with the included custom-made dark-grey modular mattress pack, creating a clean and coordinated interior.

Regardless of the selected material, our priorities remain:

• Structural strength

• Compact and stable construction

• Long-term durability

• Easy daily use

• Visual harmony with the Fiat Ducato interior

The system is designed to provide many years of reliable use when correctly installed, secured and maintained.

Fiat Ducato Camper Bed Dimensions and Module Measurements

Full-Width Sleeping Platform for Cargo, Combi and Minibus Vans

The final measurements depend on the vehicle's interior trim, seating arrangement, wheel arches and selected side modules.

General measurements are:

• Main central furniture width: approximately 170 cm

• Full sleeping width with adapted side modules: approximately 180 cm

• Furniture module depth: 120 cm

• Extended bed length: approximately 185–190 cm

The included mattress pack is manufactured for the confirmed configuration and divided into sections for:

• Sleeping mode

• Dining mode

• Lounge or sofa mode

• Hammock position

• Individual access to storage compartments

The sectional design allows individual trunks to be opened without removing the complete mattress pack. The pieces fit closely together to create a stable and comfortable sleeping surface with minimally noticeable joints.

Fiat Ducato Camper Kit Installation: Quick Setup, Secure Fastening & Everyday Use

Quick Removable Setup – Switch from Daily Use to Camper Mode in Minutes

The Fiat Ducato camper furniture kit is designed for quick, reversible installation without fixed fittings or permanent structural modifications to the vehicle.

Its self-install system allows you to convert your Ducato from a work, cargo or passenger van into a practical camper and return it to everyday use whenever required.

Before manufacturing, we confirm the vehicle's body length, roof height, seating arrangement, interior trim, wheel arches and available anchoring points to ensure the correct fit.

Secure Fastening & Stored Supports for Quiet Travel

The camper module includes a dedicated compartment for the table leg and folding bed supports, keeping every component securely stored and preventing movement or rattling while driving.

The furniture must always be correctly secured using suitable factory anchoring or load-restraint points for the confirmed vehicle configuration.

When installed as a removable system without permanent structural modifications, the furniture is normally treated as securely fastened cargo rather than a fixed camper conversion. Requirements may vary depending on the country, vehicle, inspection authority and accessories installed, so the applicable local regulations should always be checked.

Reinforced Two-Section Support System & Seat Protection

The Fiat Ducato removable camper module distributes the sleeping load across two reinforced support zones:

1. Rear main module – the largest structural section and primary load-bearing area.

2. Front folding extension – supported either by the folded rear seats at the designed contact points or by folding support legs when the vehicle is used without rear seats.

This configuration creates a solid and stable sleeping platform while avoiding concentrated pressure on the vehicle's interior components.

When the module is correctly configured and installed, the original seats remain protected and are not subjected to damaging point loads.

Everyday Use with the Camper Module Folded

When not in sleeping mode, the complete module folds compactly inside the rear cargo area together with the custom-made dark-grey modular mattress pack.

This helps preserve:

• Practical cargo space for everyday use

• Rear visibility in compatible Combi and Minibus layouts

• An organised, discreet interior

• Quick access to the camper equipment

• Easy switching between work, passenger and camper use

Fiat Ducato Compatibility & Adjustable Installation Heights

Adapted to L1–L4 and H1–H3 Cargo, Combi and Minibus Layouts

The central furniture module is the same proven design used across our compatible large-van camper systems. For each Fiat Ducato, the side modules and support arrangement may be adapted to the usable interior width, wheel arches, side trim and selected seating configuration.

Compatibility is confirmed according to:

• Fiat Ducato model year

• Body length: L1, L2, L3 or L4

• Roof height: H1, H2 or H3

• Cargo, Combi or Minibus interior

• Seats or bulkhead to be retained

• Wheel-arch shape and interior trim

• Rear equipment and available anchoring points

• Required storage capacity and sleeping layout

Depending on the real interior and whether the kit is used with or without rear seats, the module can be manufactured at approximately:

• 40 cm

• 44 cm

• 48 cm

• 52 cm

The appropriate height is selected to balance under-bed storage, sleeping comfort, available headroom and alignment with folded seats or support legs.

Explore Fiat Ducato Camper Kits, Colours & Materials

Camper Furniture with Custom Dark-Grey Modular Mattress Pack Included

Explore the available Fiat Ducato camper furniture kits, materials and finishes in our online store. The listed furniture options include a custom-made dark-grey modular mattress pack adapted to the confirmed vehicle configuration.

👉 See the Fiat Ducato camper furniture kit in our online store:

https://www.kitmueblecamper.com/p/fiat-ducato-camper-camper-furniture-kit-with-mattress-pack-included/ 

Optional Removable Sink & Kitchen Unit for Fiat Ducato

Independent Kitchen Furniture for Large Camper Vans

The Fiat Ducato's generous interior space allows the rear camper kit to be combined with our independent removable sink and kitchen unit, subject to the available space and confirmed layout.

This complementary unit can provide:

• Additional worktop space

• Compatibility with a suitable 12V water system

• Extra drawers and storage

• Independent removable installation

• A practical second camper zone separate from the rear bed module

Any water, electrical or cooking accessories must be installed, secured and used in accordance with their manufacturer's instructions and the regulations applicable to the vehicle and country.

👉 See the compatible camper sink and kitchen unit:

https://www.kitmueblecamper.com/p/camper-sink-kitchen-unit-compatible-with-camper-furniture-kits/ 

Available Configurations & Compatible Accessories for the Fiat Ducato Camper Box

Customize Your Fiat Ducato Camper Kit with Functional Add-Ons

The Fiat Ducato Camper Furniture Kit can be combined with optional accessories to improve cooking, water storage, privacy, electrical autonomy and year-round comfort.

Available options depend on the Ducato model year, L1–L4 body length, H1–H3 roof height, Cargo, Combi or Minibus layout and the available interior space.

Compatible Accessories for the Fiat Ducato

✅ Foldable Camper Sink with Drain Plug

A compact washing solution designed to work with the portable 12V shower while occupying considerably less space than a conventional fixed sink.

https://www.kitmueblecamper.com/p/foldable-camper-sink-with-drain-plug-compact-and-practical-for-camper-furniture/ 

✅ 12V Outdoor Camper Shower with Portable 20L Water Tank

Suitable for showering, washing dishes, cleaning equipment or rinsing bicycles outside the vehicle.

https://www.kitmueblecamper.com/p/12v-outdoor-camper-shower-20l-portable-water-tank/ 

✅ Custom Campingaz 1-Burner Stove

Compatible with the made-to-measure rear kitchen drawer of the Fiat Ducato camper furniture.

https://www.kitmueblecamper.com/p/custom-campingaz-1-burner-stove-for-our-camper-furniture/ 

✅ Sliding Fridge Support with Folding Brackets

This optional configuration provides easier access to the compressor fridge. Its dimensions and position are selected when ordering the Fiat Ducato camper kit.

https://www.kitmueblecamper.com/p/fiat-ducato-camper-camper-furniture-kit-with-mattress-pack-included/ 

✅ Coolzone 35L Compressor Fridge

Our recommended compressor fridge for compatible rear compartments and optional sliding fridge supports.

https://www.kitmueblecamper.com/p/coolzone-35l-compressor-fridge-lg-compressor-recommended-for-our-camper-furniture-kits/ 

✅ Nine-Layer Thermal Blackout Covers

Designed to improve privacy and thermal insulation inside compatible Fiat Ducato Cargo, Combi and Minibus configurations.

https://www.kitmueblecamper.com/p/blackout-shades-thermal-insulation-for-camper-vans1/ 

✅ 2+1 Modular Camper Furniture Configuration

This layout allows one section of the furniture to be removed when additional space is required for bicycles, surfboards, work equipment or larger luggage.

https://www.kitmueblecamper.com/p/en-modalidad-2-1/ 

✅ Auxiliary Battery with Optional Inverter

Provides independent power for the compressor fridge, lighting, USB connections, 12V accessories and compatible 230V equipment.

https://www.kitmueblecamper.com/en/camperizar-furgoneta/bateria-camper/ 

✅ Independent California-Style Camper Sink and Kitchen Unit

A separate furniture module with clean and waste-water tanks, storage compartments, drawers and a 12V water pump. It can be combined with the rear Fiat Ducato Camper Box when the available layout allows.

https://www.kitmueblecamper.com/p/camper-sink-kitchen-unit-compatible-with-camper-furniture-kits/ 

✅ Stationary Heater with Digital Controller

A stationary heating system may be added subject to vehicle compatibility, available installation space and applicable regulations.

https://www.kitmueblecamper.com/p/en-calefaccion-estacionaria/ 

Product availability and specifications should always be checked on the corresponding product page. Fixed electrical systems, stationary heaters and other permanent installations may require professional installation, certification or approval depending on the vehicle and applicable local regulations.

How to Order Your Fiat Ducato Camper Kit with Accessories

Choose the required camper furniture configuration and add the compatible accessories individually to your order.

For compatibility advice, tell us your Fiat Ducato model year, L1–L4 body length, H1–H3 roof height, Cargo, Combi or Minibus configuration and the number of seats you want to retain.

📲 WhatsApp:

https://wa.me/34653871812 

Fiat Ducato Camper Furniture Kit Installation: Quick Setup, Secure Fixing & Everyday Use

Quick Removable Setup: Convert Your Fiat Ducato in Minutes

The Fiat Ducato Camper Furniture Kit is designed for quick and reversible installation without fixed furniture or permanent structural modifications.

Position the module, secure it correctly and prepare the vehicle for travelling. When the Ducato is required for professional, cargo or passenger use, the camper furniture can be folded or removed according to the selected configuration.

Secure Fixing While Driving: Cargo Tie-Down Points & Stable Transport

The furniture is secured using suitable factory cargo tie-down points or anchoring rings, depending on the Fiat Ducato version and confirmed interior layout.

The kit includes a dedicated compartment for storing the table leg and any removable bed-support legs supplied with the selected configuration. This keeps the components secured and prevents loose movement or unwanted noise while driving.

When installed as a removable system without permanent structural modifications, the furniture is normally treated as securely fastened cargo rather than a fixed camper conversion.

It must always be correctly secured while travelling. Requirements vary by country, vehicle, inspection authority and installed accessories, so the applicable local regulations should be checked.

Reinforced Two-Section Support System

The Fiat Ducato camper module distributes the sleeping load across two reinforced sections:

1. Rear main module – the primary structural and load-bearing section.

2. Front folding extension – supported by compatible folded rear seats or by removable folding support legs in seat-free layouts.

This configuration creates a solid, compact and stable sleeping platform while avoiding concentrated pressure points on the vehicle's interior components.

Everyday Use with the Module Folded

When travelling, the New Design camper furniture can remain folded inside the rear cargo area together with its custom-made dark-grey modular mattress pack:

• In compatible Combi or Minibus models, the compact configuration helps preserve rear visibility and keeps the camping equipment discreet.

• In Cargo or Panel Van models, the module remains folded and properly secured using suitable anchoring points.

• The Ducato remains practical for everyday, professional or family use.

Adjustable Installation Heights with or without Rear Seats

Depending on the confirmed interior layout, the Fiat Ducato camper furniture can be manufactured at approximately:

• 40 cm

• 44 cm

• 48 cm

• 52 cm

When compatible rear seats are retained, the final furniture height is adapted to the actual folded-seat height and required bed alignment.

In seat-free Cargo layouts, the height is selected according to the required under-bed storage, available headroom and intended use.

Detailed Fiat Ducato Compatibility: L1–L4, H1–H3, Cargo, Combi & Minibus

The central furniture module uses the same proven design as our compatible large-van camper systems. The lateral modules and support arrangement may be adapted to the Fiat Ducato's usable interior width, wheel arches and side trim.

Before confirming an order, we check:

• Model year and exact vehicle version

• Body length: L1, L2, L3 or L4

• Roof height: H1, H2 or H3

• Vehicle layout: Cargo, Panel Van, Combi or Minibus

• Bulkhead, floor and interior lining

• Wheel arches and plastic trim

• Rear equipment and cargo rings

• Original seating arrangement

• Number of seats to retain

• Available and compatible anchoring points

• Required furniture height and sleeping configuration

Frequently Asked Questions about the Fiat Ducato Camper Box

Which Fiat Ducato versions are compatible with the removable camper kit?

The furniture can be adapted to compatible Fiat Ducato L1, L2, L3 and L4 vans with H1, H2 or H3 roof heights, including Cargo, Combi and Minibus layouts. Before manufacturing, we confirm the model year, body length, roof height, seating or bulkhead arrangement, wheel-arch trim, rear equipment and available anchoring points.

What are the bed dimensions of the Fiat Ducato camper conversion?

The furniture structure is approximately 170 cm wide and 120 cm deep. With the custom mattress pack and full-width configuration, the sleeping area is approximately 180 cm wide and 185–190 cm long. Final dimensions depend on the vehicle layout, interior trim, wheel arches, installed seats and selected side modules or extensions.

What is included with the Fiat Ducato camper furniture kit?

The kit can include a removable folding bed structure, a custom-made dark-grey modular mattress pack, a rear kitchen drawer prepared for a compatible Campingaz-style stove, a multi-height indoor and outdoor table, storage compartments and the required folding supports. Exact equipment depends on the selected configuration.

Does the removable Fiat Ducato camper kit require homologation?

When installed as a removable system without permanent structural modifications, the furniture is normally treated as securely fastened cargo rather than a fixed camper conversion. It must always be correctly secured while travelling. Requirements vary by country, vehicle, inspection authority and installed accessories, so the applicable local regulations should be checked.

Which fridge and kitchen accessories are compatible with the Fiat Ducato camper kit?

The Coolzone 35L compressor fridge is recommended for compatible layouts and can be placed in a dedicated compartment or on an optional sliding support. The kit can also be combined with a removable sink and kitchen unit, subject to the available space and the confirmed vehicle configuration.

Customer Reviews of Kit Muebles Camper

4.9/5 Rating Based on 51 Customer Reviews

Our customers value the practicality, strength and everyday usability of our removable camper furniture kits.

Many reviews highlight the quick setup, storage capacity, comfortable made-to-measure mattress pack and the ability to alternate between everyday vehicle use and camper mode.

Google Reviews from Spain and France

Read customer experiences and see photographs of real camper furniture installations through our Google Maps profiles:

🇪🇸 Madrid – Arganda del Rey

https://maps.app.goo.gl/YR3S8WCe1pqdb1Xb7 

🇪🇸 Barcelona – Tordera

https://maps.app.goo.gl/bHjBo51GtmkenoCa7 

🇪🇸 Seville – Écija

https://maps.app.goo.gl/13MZuMieqKebSP9w6 

🇫🇷 France – Narbonne / Argeliers Area

https://maps.app.goo.gl/6HwG9uanwFepyD6cA 

Order Your Fiat Ducato Camper Furniture Kit

Two Direct Online Shop Options for Your Fiat Ducato Conversion

Transform your compatible Fiat Ducato into a practical camper with a removable furniture system suitable for travelling, camping and everyday vehicle use.

🟢 Fiat Ducato Camper Furniture Kit with Custom-Made Dark-Grey Modular Mattress Pack Included:

https://www.kitmueblecamper.com/p/fiat-ducato-camper-camper-furniture-kit-with-mattress-pack-included/

🟢 Independent Camper Sink and Kitchen Unit Compatible with Camper Furniture Kits:

https://www.kitmueblecamper.com/p/camper-sink-kitchen-unit-compatible-with-camper-furniture-kits/

📲 Request compatibility advice or a customized configuration through WhatsApp:

https://wa.me/34653871812 

Thanks Be to God

Every Project, Journey and Opportunity Begins with Him

Thank you for trusting Kit Muebles Camper.

Above all, thanks be to God for every project, every journey and every opportunity to serve.

"I can do all things through Christ who strengthens me." — Philippians 4:13

Juan Jose,