Cart
0
0.00 €
Peugeot Boxer Camper Box – Removable Modular Camper Conversion Kit
Removable, self-install New Design camper furniture for Peugeot Boxer L1–L4 and H1–H3 Cargo, Combi and Minibus vans, with a bed approximately 180 cm wide and 185–190 cm long, a custom dark-grey mattress pack, rear kitchen, multi-height table and XL storage.
Peugeot Boxer Camper Conversion for Cargo, Combi and Minibus Vans
Removable New Design Camper Furniture for Peugeot Boxer L1–L4 and H1–H3 Models
Transform your Peugeot Boxer into a spacious and practical camper van with our removable, self-install New Design camper furniture system. It is designed for compatible L1, L2, L3 and L4 body lengths with H1, H2 or H3 roof heights.
The system can be adapted to Peugeot Boxer Cargo, Combi and Minibus layouts, including compatible configurations that retain 3, 5 or 6 usable seats. Before manufacturing, we confirm the model year, body length, roof height, seating or bulkhead arrangement, wheel-arch trim, rear equipment and available anchoring points.
The Peugeot Boxer camper furniture kit can include:
✅ A removable folding bed approximately 185–190 cm long and up to approximately 180 cm wide in the full-width configuration.
✅ A custom-made dark-grey modular mattress pack, included with the furniture kit.
✅ A rear pull-out kitchen drawer prepared for a compatible Campingaz-style stove.
✅ A multi-height table for dining or lounge use inside the van and as an outdoor camping table.
✅ XL storage trunks and optional side modules adapted to the available rear space.
✅ A dedicated compartment or optional sliding support for the recommended Coolzone 35L compressor fridge.
✅ Secure storage for the table leg and folding bed supports when the system is not deployed.
When folded, the complete module and mattress pack remain inside the rear cargo area, helping preserve everyday transport capacity, interior organisation and rear visibility in compatible glazed versions.
The furniture is removable and does not require drilling or permanent structural modifications. When correctly secured for travelling, it is normally treated as removable cargo rather than a fixed camper conversion. Applicable requirements should always be checked according to the country, vehicle, inspection authority and accessories installed.
👉 Buy the Peugeot Boxer camper furniture kit with the custom dark-grey modular mattress pack included:
Peugeot Boxer Camper Box – Removable Camper Kit with Mattress Pack
Peugeot Boxer Custom Camper Conversion – Simple and Versatile Layout
Peugeot Boxer Removable Camper Furniture Kit for Every Generation
Shared Large-Van Platform with Citroën Jumper, Fiat Ducato and Current Opel Movano Models
The video shows an example of our Peugeot Boxer camper furniture kit with a slightly customised layout. The standard version follows the same removable, self-install New Design furniture system, manufactured according to the actual dimensions and interior configuration of each van.
We specialise in made-to-measure removable camper furniture for large vans. The Peugeot Boxer shares its main large-van architecture with the Citroën Jumper and Fiat Ducato, while the current Opel Movano, introduced in 2021, belongs to the same Stellantis large-van family.
Although these vehicles share many structural characteristics, dimensions, interior trim, seating arrangements and anchoring points can vary. For this reason, every camper module is configured for the customer's exact vehicle rather than assuming that one identical kit fits every version.
The same modular furniture concept can also be manufactured for other large vans, including:
Ford Transit
Renault Master
Mercedes Sprinter
These models do not share the Peugeot Boxer platform, so they require their own model-specific measurements and furniture configuration.
Peugeot Boxer Generations and Compatible Body Sizes
Camper Furniture for First-, Second- and Third-Generation Boxer Vans in L1–L4 and H1–H3 Configurations
The Peugeot Boxer camper box can be adapted to the three principal Boxer generations:
First generation: 1994–2002
Second generation: 2002–2006
Third generation: 2006–present, including the major updates introduced from 2014 onwards
Our removable camper furniture is available for compatible L1, L2, L3 and L4 body lengths and H1, H2 and H3 roof heights, depending on the model year and vehicle configuration.
The kit can be manufactured for Cargo, Combi and Minibus versions. Before production, we confirm the exact generation, body length, roof height, seating or bulkhead arrangement, interior trim, wheel arches, rear equipment and available anchoring points to ensure the correct fit.
Peugeot Boxer Camper Conversion Kit – Fast, Removable and Fully Modular
Compatible Layouts for 3, 5 or 6 Usable Seats in Cargo, Crew-Van, Combi and Minibus Models
Our New Design Peugeot Boxer camper furniture system provides a quick and reversible way to convert your van for travel while preserving its everyday practicality.
Depending on the original seating layout and selected furniture configuration, the vehicle can retain 3, 5 or 6 usable seats. Before manufacturing, we confirm the exact model year, body length, roof height, seating arrangement, bulkhead, interior trim and available anchoring points.
The removable furniture is designed for self-installation and can be fitted or removed without drilling or permanent structural alterations. In compatible passenger layouts, the folding bed extension can rest on the folded rear seats. In cargo versions without rear seats, it is supported by reinforced folding legs.
When folded, the complete camper box and its made-to-measure dark-grey modular mattress pack remain inside the rear area, providing:
✔ Rear visibility in compatible glazed Combi and Minibus layouts
✔ A clean and organised interior
✔ Secure fastening through compatible original load-lashing points where available
✔ Continued use as a work, cargo or passenger van
✔ A reversible camper setup ready for travel and weekend trips
When installed without permanent structural modifications and used as a removable system, the furniture is normally treated as securely fastened cargo rather than a fixed camper conversion. It must always be properly secured while travelling.
Approval and inspection requirements vary according to the country, vehicle, installation and inspection authority. Fixed electrical systems, gas installations, heaters, windows, roof vents or other permanent accessories may require separate approval.
Materials Available for the Peugeot Boxer Camper Furniture Kit
Four Furniture Options with a Made-to-Measure Dark-Grey Modular Mattress Pack Included
The Peugeot Boxer camper furniture kit is available in four materials, allowing you to choose according to budget, weight, appearance, moisture resistance and intended use.
The prices shown correspond to the standard furniture configuration and include the custom mattress pack. Final measurements, weight and price may vary depending on the selected layout, side modules and additional equipment.
1. White Laminated MDF – €850
Economical Finish for Occasional Camper Use
12 mm thickness
Clean white laminated finish
Approximate standard kit weight: 75 kg
Most economical option
Suitable for occasional camper use
More sensitive to impacts and moisture than the plywood options
Available for workshop collection only
Not available for pallet shipping
This is the most affordable choice for customers collecting the camper kit directly from one of our workshops.
2. Natural Pine Plywood with Phenolic Interior – €900
Natural Wood Grain, Good Moisture Resistance and Low Weight
15 mm thickness
Warm natural wood colour with visible grain
Approximate standard kit weight: 60 kg
Strong and comparatively lightweight
Phenolic-bonded interior providing good moisture resistance
Suitable for regular camper use
Natural appearance that works particularly well in large vans
This option combines a traditional wood finish with strength, manageable weight and good resistance to everyday moisture.
3. Creamy-White Poplar Plywood – €925
Bright Interior Finish with a Strong, Lightweight Structure
15 mm thickness
Pale creamy-white colour with subtle natural grain
Approximate standard kit weight: 65 kg
Strong and resistant to cracking or splintering
Good moisture resistance, although it is not completely waterproof
Bright finish that helps create a lighter-looking interior
Slightly softer surface that may mark under sharp or concentrated pressure
Poplar plywood is ideal for customers seeking a bright, natural finish with a good balance between weight and structural strength.
4. Dark Coachbuilder-Grade HPL Plywood – €950
Maximum Resistance with a Dark Professional Finish
15 mm thickness
Dark brown finish, almost black
Approximate standard kit weight: 65 kg
Highly resistant and waterproof
One smooth face and one anti-slip face
Designed for regular or intensive camper use
Excellent structural durability for large furniture modules
The dark coachbuilder-grade HPL option is recommended for customers prioritising resistance, waterproof protection and a professional heavy-duty finish.
All stated weights are approximate and refer to a standard Peugeot Boxer configuration. The final weight depends on the vehicle, bed width, furniture layout, side modules and selected accessories.
Camper Furniture Kit Materials – Differences, Properties & Durability
Peugeot Boxer Camper Box – 35L Slide-Out Fridge Drawer Example
Peugeot Boxer Camper Furniture Features – Modular Layout for Maximum Interior Space
Rear Pull-Out Kitchen, Multi-Height Table, XL Storage and Coolzone 35L Fridge Compatibility
The Peugeot Boxer camper furniture kit uses a modular layout designed to maximise storage and sleeping space while keeping the complete system removable, self-installable and reversible.
Depending on the selected configuration, the rear module can include a custom pull-out kitchen drawer prepared for a compatible Campingaz-style stove. Behind it, an independent top-opening trunk provides storage for cookware, food and camping accessories.
Any stove must be used according to the manufacturer's instructions, with suitable ventilation and in compliance with local safety regulations, preferably outdoors.
At the centre of the camper box, the multi-height indoor and outdoor table can be configured for:
Dining mode
Lounge or sofa mode
Hammock position
Outdoor camping use
The different positions can be seen in the demonstration video.
Behind the table, an additional top-opening trunk provides further storage. Compatible layouts can also include a left-side storage area with both top and front access.
This area can be configured for:
A water container for the 12V outdoor shower
Shower equipment and accessories
General camping equipment
A portable toilet
When carrying a portable toilet inside the table compartment or another storage area, it must remain properly secured while travelling. Once the bed is deployed, it can be moved to the front cabin area when required.
Compatible Compressor Fridge Compartment
The Coolzone 35L compressor fridge is the recommended option for compatible Peugeot Boxer layouts.
Depending on the selected furniture configuration, it can be placed:
Inside a compatible top-access compartment, or
On an optional front sliding fridge support
Available space, ventilation and the required 12V electrical supply are confirmed before manufacturing.
Optional Peugeot Boxer Side Modules
Near-Full-Width Bed Extension and Additional Wheel-Arch Storage
Optional side modules are available for compatible layouts and can cover the wheel-arch areas, extending the sleeping surface towards the interior walls of the van.
Each side module includes a top-opening lid, providing useful storage for:
Bedding and blankets
Clothing
Laundry bags
Shoes
Personal or travel items
With the compatible side modules and mattress sections installed, the Peugeot Boxer modular bed system can provide a near-full-width sleeping surface while maintaining accessible storage underneath.
Optional Additional Drawer Configuration
Available for Customers Who Prefer Separate Pull-Out Storage
An additional full-extension drawer can be incorporated into compatible Peugeot Boxer camper box layouts.
Additional drawer: €50
Reinforced drawer guides: €110, when required for heavier loads or specific configurations
These extras are not included in the standard furniture price and should be confirmed before manufacturing.
Although separate drawers can improve direct access to certain items, our standard recommendation remains a large open storage trunk because:
Additional internal framework reduces usable storage volume
Drawer structures add weight
Full-extension runners experience greater long-term leverage
Large objects are easier to store inside an open trunk
The simpler structure generally provides greater durability
The best option depends on the equipment you intend to carry and how frequently you need to access it.
Finish, Aesthetic Harmony and Long-Term Durability
Furniture and Mattress Colours Designed for the Peugeot Boxer Interior
The New Design camper furniture system is available in:
White laminated MDF
Natural phenolic pine plywood
Creamy-white poplar plywood
Dark coachbuilder-grade HPL plywood
Each finish is combined with a made-to-measure dark grey modular mattress pack, creating a practical and visually balanced interior.
Our priorities are:
Structural strength
Stable and compact construction
Efficient use of the available space
Long service life with proper care
Visual harmony with the Peugeot Boxer interior
Peugeot Boxer Camper Furniture Dimensions
Bed and Storage Measurements for Cargo, Crew-Van, Combi and Minibus Layouts
The exact measurements depend on the Boxer generation, body length, interior trim, wheel arches, original seats and selected furniture configuration.
Standard reference measurements are:
Main furniture structure width: approximately 170 cm
Full sleeping surface with compatible side modules and mattress pack: up to approximately 180 cm wide
Furniture module depth: approximately 120 cm
Extended bed length: approximately 185–190 cm
The made-to-measure dark grey mattress pack is divided into modular sections adapted to the selected layout. This makes it possible to use dining, lounge and hammock positions and access individual storage compartments without removing the complete mattress system.
Final measurements are confirmed for the specific Peugeot Boxer before manufacturing.
Peugeot Boxer Camper Conversion Kit Installation, Weight Distribution and Height Options
Quick Removal, Secure Fastening and a Two-Zone Folding Bed Support System
Once the compatible securing method has been confirmed, the Peugeot Boxer removable camper furniture can be installed or removed in a few minutes without drilling or making permanent structural alterations to the van.
The furniture is secured using compatible original load-lashing or anchoring points where available. The appropriate fastening method depends on the Boxer generation, body configuration and available factory points and must always be verified before travelling.
The module includes dedicated compartments for storing the table leg and folding bed support legs, keeping these components organised and secured while driving.
Two Load-Support Zones
The folding bed structure distributes the load between two principal support areas:
Rear main module: the largest section and primary structural base.
Deployable front extension: depending on the configuration, this section may rest on compatible folded rear seats or on dedicated folding support legs.
This layout distributes the load across several contact points and helps prevent concentrated pressure on individual seats or interior components. The final support arrangement is confirmed according to the actual vehicle and selected furniture layout.
When installed without permanent structural modifications and used as a removable system, the furniture is normally treated as securely fastened cargo rather than a fixed conversion. Requirements vary according to the country, vehicle, inspection authority and accessories installed.
Daily Use with the Camper Module Folded
In compatible layouts, the complete camper box and its made-to-measure dark grey modular mattress pack remain folded inside the rear area when not in use.
This allows the Peugeot Boxer to retain its everyday function as a:
Cargo or work van
Crew van
Combi or Minibus
Passenger and leisure vehicle
The module, mattress sections, table leg and bed supports must remain properly secured whenever the vehicle is moving.
Adjustable Peugeot Boxer Camper Bed Heights
Configurations With or Without Rear Seats
The furniture height is adapted to the original seating layout and intended use:
With compatible folded rear seats: approximately 55–56 cm
Without rear seats: approximately 40, 44 or 48 cm
A lower configuration provides more headroom, while a higher configuration creates additional storage beneath the sleeping platform.
The final height is confirmed according to:
Boxer generation and model year
L1, L2, L3 or L4 body length
H1, H2 or H3 roof height
Cargo, Crew-Van, Combi or Minibus configuration
Number and position of seats being retained
Floor level and interior trim
Wheel arches and rear equipment
Available anchoring points
Required storage and bed arrangement
Peugeot Boxer Camper Kits, Materials and Mattress Packs
View the Complete Removable Camper Furniture Kit Online
The Peugeot Boxer camper box is available in white laminated MDF, natural phenolic pine plywood, creamy-white poplar plywood and dark coachbuilder-grade HPL plywood.
The standard price includes the made-to-measure dark grey modular mattress pack. Final compatibility, measurements and equipment are confirmed before manufacturing.
👉 View the Peugeot Boxer camper furniture kit:
Optional Sink and Kitchen Unit for Peugeot Boxer
Independent Removable Furniture for Large Camper Vans
The generous interior space of the Peugeot Boxer allows the rear camper box to be combined with an independent sink and kitchen unit in compatible layouts.
Depending on the selected model, this additional unit can provide:
Additional worktop space
Compatibility with removable clean and waste-water containers
Sink and water-system space
Extra drawers and storage compartments
Independent removable installation
The available space and compatibility must be confirmed according to the Boxer length, seating arrangement and selected camper module. Permanent plumbing, electrical or gas installations may require separate approval.
👉 View the compatible camper sink and kitchen unit:
https://www.kitmueblecamper.com/p/camper-sink-kitchen-unit-compatible-with-camper-furniture-kits/
Available Configurations & Compatible Accessories for the Peugeot Boxer Camper Box
Customize Your Peugeot Boxer Camper Box with Functional Add-Ons
The Peugeot Boxer Camper Furniture Kit can be combined with optional accessories to improve cooking, water storage, privacy, electrical autonomy and year-round comfort.
Available options depend on the Boxer model year, L1–L4 body length, H1–H3 roof height, Cargo, Combi or Minibus layout and the available interior space.
Compatible Accessories for the Peugeot Boxer
✅ Foldable Camper Sink with Drain Plug
A compact washing solution designed to work with the portable 12V shower while occupying considerably less space than a conventional fixed sink.
✅ 12V Outdoor Camper Shower with Portable 20L Water Tank
Suitable for showering, washing dishes, cleaning equipment or rinsing bicycles outside the vehicle.
https://www.kitmueblecamper.com/p/12v-outdoor-camper-shower-20l-portable-water-tank/
✅ Custom Campingaz 1-Burner Stove
Compatible with the made-to-measure rear kitchen drawer of the Peugeot Boxer camper furniture.
https://www.kitmueblecamper.com/p/custom-campingaz-1-burner-stove-for-our-camper-furniture/
✅ Sliding Fridge Support with Folding Brackets
This optional configuration provides easier access to the compressor fridge. Its dimensions and position are selected when ordering the Peugeot Boxer camper kit.
✅ Coolzone 35L Compressor Fridge
Our recommended compressor fridge for compatible rear compartments and optional sliding fridge supports.
✅ Nine-Layer Thermal Blackout Covers
Designed to improve privacy and thermal insulation inside compatible Peugeot Boxer Cargo, Combi and Minibus configurations.
https://www.kitmueblecamper.com/p/blackout-shades-thermal-insulation-for-camper-vans1/
✅ 2+1 Modular Camper Furniture Configuration
This layout allows one section of the furniture to be removed when additional space is required for bicycles, surfboards, work equipment or larger luggage.
https://www.kitmueblecamper.com/p/en-modalidad-2-1/
✅ Auxiliary Battery with Optional Inverter
Provides independent power for the compressor fridge, lighting, USB connections, 12V accessories and compatible 230V equipment.
https://www.kitmueblecamper.com/en/camperizar-furgoneta/bateria-camper/
✅ Independent California-Style Camper Sink and Kitchen Unit
A separate furniture module with clean and waste-water tanks, storage compartments, drawers and a 12V water pump. It can be combined with the rear Peugeot Boxer Camper Box when the available layout allows.
https://www.kitmueblecamper.com/p/camper-sink-kitchen-unit-compatible-with-camper-furniture-kits/
✅ Stationary Heater with Digital Controller
A stationary heating system may be added subject to vehicle compatibility, available installation space and applicable regulations.
https://www.kitmueblecamper.com/p/en-calefaccion-estacionaria/
Product availability and specifications should always be checked on the corresponding product page. Fixed electrical systems, stationary heaters and other permanent installations may require professional fitting, certification or approval depending on the vehicle and applicable local regulations.
How to Order Your Peugeot Boxer Camper Kit with Accessories
Choose the required camper furniture configuration and add the compatible accessories individually to your order.
For compatibility advice, tell us your Peugeot Boxer model year, L1–L4 body length, H1–H3 roof height, Cargo, Combi or Minibus configuration and the number of seats you want to retain.
📲 WhatsApp:
Peugeot Boxer Camper Furniture Kit Installation: Quick Setup, Secure Fixing and Everyday Use
Quick Removable Setup: Convert Your Peugeot Boxer in Minutes with No Fixed Installation
The Peugeot Boxer Camper Furniture Kit is designed for quick and reversible installation. Position it, secure it and prepare the vehicle for travelling; when you need the van for everyday or professional use, the module can be removed or folded according to the selected configuration.
Secure Fixing While Driving: Cargo Tie-Down Points and Stable Transport
The camper furniture is secured using the vehicle's cargo tie-down points or anchoring rings where available, depending on the Peugeot Boxer version and confirmed interior layout.
The kit also includes a dedicated compartment for storing the table leg and any removable bed-support legs supplied with the selected configuration, keeping them properly secured and preventing loose movement or unwanted noise while driving.
Everyday Use with the Module Folded: Organized Rear Area and Visibility Depending on the Version
When travelling, the New Design camper furniture can remain folded inside the rear cargo area together with its made-to-measure dark-grey modular mattress pack:
In Combi or Minibus models with rear windows, this helps preserve rear visibility and keeps the camper equipment discreet.
In Cargo or Panel Van models, the module remains folded and properly secured using suitable anchoring points, keeping the interior organized.
Installation Heights with or without Rear Seats
The furniture height is adapted to the confirmed Peugeot Boxer configuration:
With compatible folded rear seats: approximately 55–56 cm
Without rear seats: approximately 40, 44 or 48 cm
The final height is selected according to the original seating arrangement, available storage space, bed alignment and intended use.
Detailed Peugeot Boxer Compatibility: L1–L4, H1–H3, Cargo, Combi and Minibus Layouts
Before confirming the order, we check:
Model year and vehicle generation
Body length: L1, L2, L3 or L4
Roof height: H1, H2 or H3
Vehicle version: Cargo, Panel Van, Combi or Minibus
Actual interior layout: bulkhead, floor, linings, cargo rings, wheel arches, plastic trim and rear equipment
Original seating arrangement and the number of seats to retain
Available and compatible anchoring points
The most suitable furniture height and configuration for its intended use
Frequently Asked Questions about the Peugeot Boxer Camper Box
Which Peugeot Boxer versions are compatible with the removable camper kit?
The furniture can be adapted to compatible Peugeot Boxer L1, L2, L3 and L4 vans with H1, H2 or H3 roof heights, including Cargo, Combi and Minibus layouts. Before manufacturing, we confirm the model year, body length, roof height, seating or bulkhead arrangement, wheel-arch trim, rear equipment and available anchoring points.
What are the bed dimensions of the Peugeot Boxer camper conversion?
The furniture structure is approximately 170 cm wide and 120 cm deep. With the custom mattress pack and full-width configuration, the sleeping area is approximately 180 cm wide and 185–190 cm long. Final dimensions depend on the vehicle layout, interior trim, wheel arches, installed seats and selected side modules or extensions.
What is included with the Peugeot Boxer camper furniture kit?
The kit can include a removable folding bed structure, a custom-made dark-grey modular mattress pack, a rear kitchen drawer prepared for a compatible Campingaz-style stove, a multi-height indoor and outdoor table, storage compartments and the required folding supports. Exact equipment depends on the selected configuration.
Does the removable Peugeot Boxer camper kit require homologation?
When installed as a removable system without permanent structural modifications, the furniture is normally treated as securely fastened cargo rather than a fixed camper conversion. It must always be correctly secured while travelling. Requirements vary by country, vehicle, inspection authority and installed accessories, so the applicable local regulations should be checked.
Which fridge and kitchen accessories are compatible with the Peugeot Boxer camper kit?
The Coolzone 35L compressor fridge is recommended for compatible layouts and can be placed in a dedicated compartment or on an optional sliding support. The kit can also be combined with a removable sink and kitchen unit, subject to the available space and the confirmed vehicle configuration.
Customer Reviews of Kit Muebles Camper
4.9/5 Rating Based on 51 Customer Reviews
Our customers value the practicality, strength and everyday usability of our removable camper furniture kits.
Many reviews highlight the quick setup, storage capacity, comfortable made-to-measure mattress pack and the ability to alternate between everyday vehicle use and camper mode.
Google Reviews from Spain and France
Read customer experiences and see photographs of real camper furniture installations through our Google Maps profiles:
🇪🇸 Madrid – Arganda del Rey
https://maps.app.goo.gl/YR3S8WCe1pqdb1Xb7
🇪🇸 Barcelona – Tordera
https://maps.app.goo.gl/bHjBo51GtmkenoCa7
🇪🇸 Seville – Écija
https://maps.app.goo.gl/13MZuMieqKebSP9w6
🇫🇷 France – Narbonne / Argeliers Area
https://maps.app.goo.gl/6HwG9uanwFepyD6cA
Order Your Peugeot Boxer Camper Furniture Kit
Two Direct Online Shop Options for Your Peugeot Boxer Conversion
Transform your compatible Peugeot Boxer into a practical camper with a removable, made-to-measure furniture system suitable for travelling, camping and everyday vehicle use.
🟢 Peugeot Boxer Camper Furniture Kit with Made-to-Measure Dark-Grey Modular Mattress Pack Included:
🟢 Independent Camper Sink and Kitchen Unit Compatible with Camper Furniture Kits:
https://www.kitmueblecamper.com/p/camper-sink-kitchen-unit-compatible-with-camper-furniture-kits/
📲 Request compatibility advice or a customized configuration through WhatsApp:
Thanks Be to God
Every Project, Journey and Opportunity Begins with Him
Thank you for trusting Kit Muebles Camper.
Above all, thanks be to God for every project, every journey and every opportunity to serve.
"I can do all things through Christ who strengthens me." — Philippians 4:13
Juan Jose
